Whenever I try to use easytag to change the ID3 tag on an mp3 file, it doesn't work for some reason. The artist name contains a $ in Rhythmbox, which is incorrect, but if I open it in easytag and change it to a name without a $, it still shows up in Rhythmbox. I don't have Rhythmbox open while I'm doing this, and another program will change the it under Windows, where it shows up correctly.
View 1 RepliesI have just installed mplayer and everything seems to work fine until i try to go fullscreen. When i do, the actuall size of the video stays the same and the rest of the screen is filled with a black border. I have seen the main problem by many people, and the solution they all found was to change the driver from x11 to xv.
In my case however, the only driver working is x11. Anything else gives the following error Quote: Error opening/initializing the selected video_out (-vo) device This is also quite wired since the output of mplayer -vo help says that all the drivers are available.
I have setup a machine with Ubuntu 10.04 server and i have installed a KNC card for Streaming the channels. Everything is good so far and here is the real deal .. i wanna change the MAC address of the KNC card to try different things. I know how to change the MAC address of the LAN card but not sure about the KNC card. I tried few things by installing macchanger.. but didn't work out. Can any one tell me whether its possible to change the MAC of the KNC card and other tricks.Here is a little info:-
[ 11.344208] saa7146: register extension 'budget_av'.
[ 11.344704] budget_av 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.344739] IRQ 22/: IRQF_DISABLED is not guaranteed on shared IRQs
[code]...
I am trying to organize some music I just copied off cd to my hard drive. the tracks are not listed (there is no track listing or album title etc) so I go to music-properties and try to fill the stuff in. I can't type into the boxes.
View 5 Replies View RelatedThis is my 2nd try with 9.10 and audio has this screeching thingie that its driving me crazy. I've been using both 8.10 and 9.04 with perfect sound and everytime I come into 9.10 I have this horrorific sound that no matter what I do I can't fix it. In a thread somebody suggested to change the audio channels from 5.1 to 7.1 (which made sense since my hardware really is 7.1). but there's no 7.1 option available.
When I do lspci -v... I can see that:
Code:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 82fe
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
[Code]...
I have a folder that has lots of sample audio files, all in mp3 format. Does anyone know of a way to change artist - album info for all these files in one go. I am wanting to change the artist for all files to myself and album to something like day/date etc.
View 2 Replies View Relatedi installed Ubuntu 9.10 and it seems i can't have 5.1 sound playing, i've searched a lot but i still haven't found a solution to my problem. tried to change the default channels from 2 to 6, as well as the default-channel-map and much more but still nothing works..
View 2 Replies View RelatedI just downloaded Ubuntu 10.4 and love it. The only thing that I have a problem with is that I cannot change my aspect ration to 16:9 which is what my monitor is (its a flat screen in my media room).
View 9 Replies View RelatedAs I said, the problem is when veiwing flash videoes in fullscreen.
In fullscreen if v try to change the volume with multimedia keys, it gets minimized, as the notification bubble pops out.
I hv been seeing it since previous versions.
How would I go about changing the video profile on a h.264 video from 5.0 to 4.1? I need it for Xbox 360 compatibility. Can't seem to find anything on it.
View 2 Replies View RelatedI have two Ubuntus installed on my computer, but 10.04 doesn't have the right graphics driver, because it's not fast like the other one.So I need to change my graphics driver.Does anyone know how?
View 5 Replies View RelatedOn a Dell 14n, 10.04. Mic problem: To use the mic jack/external mic, I need to have MIC 3 selected at SYSTEM/PREFERENCES/SOUND/INPUT To use the built in mic, I need to have MIC 1 selected
How can I get these mic's to work w/o having to change the settings each time I want to switch mic's.. so that if the mic jack is plugged in, then the external mic works. and if the mic jack is unplugged, then the built in mic works.
I need your assistance before I start reloading software.I have a MP3 player which is owned by Root. I have tried the following:
- in terminal - chown as both my usual log-in and root...operation not permitted I ran chown as both su, root, and myself
- In Nautilus - I can't change any of the file attributes..again opening it as any of the users above.
I used to be able to copy files over to the MP3 player but not the Sandisk..but not I can't copy or do anything to the files on both.
i installed Ubuntu 10.10 yesterday, and cannot find the answer to my question. I have a whole music library of mp3's on a secondary drive that I want to use in Rhythmbox. However, in Rhythmbox's Music Player Preferences I can't get either the Library Location to change from "Multiple locations set" or the Preferred format to "CD, Lossy mp3".
When I go into Edit>Preferences>Music, where it says "Multiple locations set", it is greyed over (I think that's the term. You can't access it.) When I go into the Preferred format, mps isn't there, but it does show up in another window when I click on edit; however, the only options I have there are 'Close' and 'Help'. The help button brings up another window and syas its loading, but stays in a loading mode forever.
in 10.04 i cannot change flash settings.
View 7 Replies View RelatedI upgraded to 10.04 and now again in 10.10 I have no sound after changing users. The other user has user privileges for sound.
View 1 Replies View RelatedI have 2 tv cards that I have successfully configured to work in linux.But this 3rd one I bought recently seems to have a problem. The card is not autodetcted (that's really not the problem) but when I try to load saa7134 with:sudo modprobe saa7134 card=xx tuner=xx, it loads whatever card I indicate but the tuner never changes. This is part of the output of dmesg:
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[code]....
my VLC player is a language i cant understand, i try to do
Code:
vlc --language=en
but it dident work
How do I change the time stamp on videos that I record so that they say what DAY they were recorded instead of just the DATE? I can't find the config file which I assume would be the place to look.
View 1 Replies View RelatedI'm trying to reorganize my files and organize my music on Rhythmbox, but I've run into a really annoying problem. The cover art for one song on a particular album isn't right. All the other songs in the album are displaying properly.
I have the album cover in the same folder that the music is in with the name "Cover.jpg".
I've tried about everything I can think of. I've tried renaming the image file, tried dragging it to the album art area in the player, and I've tried moving it to the Rhythmbox folder under the name "~/.gnome2/rhythmbox/covers/Artist Name - Album Name.jpg" (Of course inserting the correct album name and artist name exactly the way it is shown in Rhythmbox). It will change if I drag and drop it, but once I go back and play the song again, it will revert to the wrong cover art.
i have this weird problem with my pavucontrol. for some reason my input levels go up and down by themselves when i'm talking on skype...mostly up...and it's annoying because i'll be talking normally, but to the people i talk to on skype it sounds like i'm yelling, and i have to have pavucontrol open always to constantly keep the levels under control..i've made a short desktop recording showing what i mean.i didn't include sound, but as you can see, i'm not turning the levels up manually..i just talk and they go up by themselves
View 3 Replies View RelatedAfter update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
How do I change the resolution in skype 2.1 beta on ubuntu 9.10?? At the moment my webcams resolution appears to be half the size of what it should be which is creating a double vision/image of me and I can only see about half of my head vertically. My resolution should be 640X480, but it clearly is not. It looks way smaller like 320X240.
View 8 Replies View RelatedAfter upgrading from karmic to lucid I can't change a default refresh rate for my crt monitor connected to my laptop (lcd switched off). I know radeon driver is trying to check what's the highest possible rate and sets it around 85, but the screen starts to "shiver". If I manualy change this setting in system settings for the screen to 75, it is ok. But I have to do this after every boot I generated xorg.conf and the appropriate modeline (it shows in the screen settings), and I added it to both monitor and screen section. Nevertheless the refresh rate is set to auto again in system settings and the screen wiggles a bit. How to disable automatic detection and force my own settings?
P.S Here's my xorg.conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code].....
Banshee have crashed 3 times 'til now when I try to change the volume inside the program. It happened only 3 times, but now I'm afraid to change the volume and change it directly with the speaker's controls.One more question. When banshee crashes, all the system gets freezed. I tried with the console (CTRL+ALT+F1) but I don't know how to kill the banshee process.
View 1 Replies View RelatedI'm not sure what the technical term for the thing that creates midi sounds. Is it the midi sequencer? or midi driver?Regardless, I'm unhappy with the tones ubuntu produces for its drum midis. Does any one know how to change which tones it uses? I use lilypond to write percussion music and it can be easily translated into a midi file. I like to do this so that I can hear how the music sounds in real life and many mistakes.Unfortunately the toms are painfully low and hard to distinguish.
View 2 Replies View RelatedI am trying to get my Multimedia player to work with Ubuntu I can't have access to it because it said that it is read only. I have got to gksudo and tried to change the permission on it but can't. The player works fine on a windows computer. All my other usb devices work fine I was able to change permission in the folders but not the drive.
View 2 Replies View RelatedI noticed that, when choosing different notes, LMMS not only changes the pitch of the instrument, but also the speed. So, if an instrument makes a sound that lasts about 5 seconds, a really low note can make it last about 10 seconds, and a really high note can last about 1 second. Is there a way to configure how LMMS handles sounds so that it changes their pitch, without changing their speed?
View 2 Replies View RelatedI think Virtualbox tried to do something to the kernal as I got an error refering to kernal version when I started Vbox.After that I had no sound.
I've tried to go through various sound fix threads but so far no success.
I've performed ALSA Upgrade:
Code:
paul@paul:~$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Oct 6 2010 for kernel 2.6.32-25-generic (SMP).
The output of aplay -l:
[Code].....
i use sony's nwz video walkman, earlier when i used windows xp it was very easy to change album art. When windows media player is playing certain music file i used to drag and drop some jpg file as album art and then transfer the file into my walkman; but now in rhythmbox if i drag and drop it changes the album art momentarily but when i transfer the music into walkman it doesn't show that album art.
View 9 Replies View Related