Ubuntu Multimedia :: Ushare With .WMV And .MKV - Can't Play
Jan 16, 2011
I have a Ushare server up and running in Ubuntu-Server 10.10. So far the only video type I have been able to get working on my Xbox360 is .avi. I am very interested in configuring it to play .wmv and .mkv videos as well, seeing as most of my library is made up of these two file-types. After taking a look at ushare's documentation, I found that .wmv and .mkv are both fully supported video formats; however, I can't seem to get either of them to work. Every time I attempt to play either of those two type, I receive a message saying: Unplayable Content: Can't play this content because it may not be supported. For more info, go to.... Here is my ushare.conf file:
[Code]......
View 2 Replies
ADVERTISEMENT
Feb 22, 2011
So in trying to install ushare to be able to play my music and videos on my xbox 360, I have apparently screwed something up and now I can't get ushare to work. I can't even get it uninstall and do a fresh install. I used the instructions found here: [URL]. I got down to the basic configuration tool. I entered the name of the media server, which I called Ubuntu_Media_Server. Then I identified my network interface, which was my wireless connection (wlan0). Then I told it what directory to share, which was /home/ryan/music and hit enter.
It did exactly what it was supposed to do which was to restart ushare. And then, oops, I forgot, I wanted to be able to see my videos as well as my music, so I went back and ran the same command that I had to start the configuration tool which was $ sudo dpkg-reconfigure ushare and voila, I went back and added in the directory for the video folder that I wanted to share and hit enter. Again, it restarted as expected then it said permission was denied to the video folder. So I went to the video folder and gave permission for it to be shared. So then in all my illustrious wisdom (which apparently equates to dumbass), I decided to completely uninstall ushare and do a fresh install. Then it wouldn't reinstall, same problem permission denied for the video file.
View 9 Replies
View Related
Feb 21, 2010
I've tried looking around but I can't figure out what's going on here. I used uShare before and it worked without a hitch! I followed these instructions here to the T. However, I recently did a reinstallation of 9.10 and followed the exact same instructions, and now I can't get uShare to come up on my PS3 (I haven't changed any settings on the PS3 or network since then, just reinstalled Ubuntu). Side note. Using
[Code]...
View 1 Replies
View Related
Jun 8, 2010
I am playing with ushare. I have a NAS with my movies I can't seem to add it to ushare.
in Windows is \sulnasvideo
I have tried that, i have tried smb://sulnas/video
View 1 Replies
View Related
Dec 31, 2010
I have a Samsung BD-6800 blu-ray player that i want to stream HD mkv files to from my pc. I made sure DLNA was enabled in the /etc/ushare.conf file. The blu-ray player sees my pc perfectly and i can navigate to the folders where the videos are stored, however when i select a folder with videos in it all that is shown is an option called "upper folder" which takes me back to the root directory. The videos are nowhere to be found. I checked on the Ushare web site to see if mkv files are supported which they are.
Here is what my /etc/ushare.conf looks like.
Code:
# /etc/ushare.conf
# Edit this file with 'dpkg-reconfigure ushare'
# Configuration file for uShare
# uShare UPnP Friendly Name (default is 'uShare').
[Code].....
View 4 Replies
View Related
Jan 9, 2011
I have been using uShare for a few years now, and up until now it has worked great. A few snags here and there, but nothing I couldn't figure out, although after five years using Ubuntu, i still consider myself a noob. Now I am on a new machine, running Ubuntu 11.04 (my last one was running 9.04) and I am having trouble with uShare again. Its installed, configured, and runs just fine, but my xbox won't recognize it.Here's the catch: the first night I set it up, after a few errors, I got it working! Watched a movie, smiled, and went to bed. Woke up the next morning, booted up the comp, fired up ushare and BAM! Nothing. I hadn't changed any settings, moved any cables, downloaded anything new, but no dice. After a little searching, I updated the .conf file to reflect a change I noticed in the IFACE. Sometimes when I boot my computer, it connects to the router on eth0, sometimes on eth1, and sometimes on eth0-eth1. I'm not sure what is up with that, but that may be a problem for another day. For right now, I just want uShare to work.
ushare.conf
# /etc/ushare.conf
# Edit this file with 'dpkg-reconfigure ushare'
[code]....
View 5 Replies
View Related
Mar 12, 2010
I'm using ushare 1.1 with my xbox360 and I'm trying to stream an avi file. It loads up ok and starts to play then after a minute it stops and loads up more of the video. I seem to remember this happening with my ps3 and mediatomb as well. Is there something I can change on my router (bt home hub)? I have enabled port forwarding for the port that ushare is running on. here's my ushare.conf
[Code]....
View 1 Replies
View Related
Dec 7, 2010
Is there another program I can use to share my movies to my 360? Ive tried setting uShare up numerous times, and always get errors. I tried uninstalling and reinstalling, and now I can even re-download it.
View 2 Replies
View Related
Feb 27, 2011
Is there anyone else out there who uses UShare? I'm trying to set it up so I can stream videos from Ubuntu to my Xbox 360. I got it set up however it spews out this:
Code:
uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server.
Benjamin Zores (C) 2005-2007, for GeeXboX Team.
See [URL] for updates.
Initializing UPnP subsystem ...
Starting in XboX 360 compliant profile ...
UPnP MediaServer listening on 192.168.2.3:49224
Sending UPnP advertisement for device ...
Listening for control point connections ...
Building Metadata List ...
Looking for files in content directory : /home/james/videos
scandir: No such file or directory
Found 1 files and subdirectories.
As you can see it's saying no such file or directory but at the same time telling me it did find the one file in the directory. How to fix this or any other software will allow me to achieve streaming to 360? Because this software seems extremely buggy.
View 2 Replies
View Related
Feb 12, 2011
I am trying to stream my music and videos to my xbox 360 from ubuntu 10.10, and I have set up ushare to do that. Ushare seems to be workign correctly, it starts up and the xbox recognises the share from the media menu, but there is no videos or music! For some reason ushare doesnt find any media in the folders I specified, and I double checked and the paths look correct to me. This is the error I get in the terminal:
[Code]...
View 6 Replies
View Related
Mar 10, 2010
After many days of trying to tweak Ubuntu 9.10 desktop i386. This subject will focus on my dvd drive. ...Here is what I have done, but I'm not sure what I did or still need to do, or to do different. ...
Basically the problem is, I can't play store bought DVDs, but I can play my copies of them.
When using MDPlayer that I added to Ubuntu, I can play the copies of my store bought DVDs, but not the originals. However, when using Ubuntu 9.10's movie player, it wont do anything and I'll have to do a force quit to close it.
I learned that this may because there is a repository of packages that cannot be included into the Ubuntu distribution, as I'm sure you already knew.
...Yet, Most people have worked around these issues.
I came across the Medibuntu site: [url]
Running the Terminal, I added the bash command that adds Medibuntu's repositiry to Ubuntu. It also adds Medibuntu's GPG key to the keyring.
(The sudo wget - etc etc etc --quiet update)
Then I jumped down to the... "This command should be run in the Terminal, after adding the repository:" ...And did that. (sudo sed -e 's/ etc etc etc /medibuntu.list)
View 2 Replies
View Related
Oct 15, 2010
i just installed 10.10 on my girls laptop (Acer Aspire 5735z) hoping it would fix the old problem i had with playing real dvd's. it didnt. it keeps saying "Could not read from Resource". when i try with VLC is say "Could not read from file". but if i put in a burned movie, it plays fine. i checked and it has libdvdcss2, libdvdnav4, and libdvdread4 installed. i get the same problems with my laptop (toshiba portege m400 tablet) which runs fedora 13.
View 5 Replies
View Related
Feb 28, 2010
Anyone else struggling to play iplayer video? I've got the proprietary Flash plugin, which means it's probably not this "SWF Authentication" thing that there's been so much talk about.
I've rebooted, tried all sorts of tinkering, it loads the applet (I can see that Flash is loading OK because other things work, and right clicking on the applet gives the Flash menu)
However, clicking the play button does nothing.
View 1 Replies
View Related
May 2, 2010
is it possible to configure my midi play back on windows 7 to play that one of the 2:[URL]..
View 2 Replies
View Related
Jun 30, 2010
when I try to play music on amarok it just won't play, it just loads lyrics and then, nothing. on rytmbox everthing works fine but amarok don't work.
View 9 Replies
View Related
Aug 11, 2010
I need to play or preferably convert (i.e. to MP3) old SNG files, which contain voice records. From what I could find, it's basically a MIDI created by synthetiser. I think it was recorded by some ancient VLC player. I failed so far to play it on anything I could download.
View 4 Replies
View Related
Mar 10, 2015
I have tried to play mp3 files with sox play.
The result I get is:
play FAIL formats: no handler for file extension `mp3'
I have installed all libsox packages I could find, including libsox-fmt-mp3 and libmad0.
sox -h though, gives me:
AUDIO FILE FORMATS: 8svx aif aifc aiff aiffc al amb amr-nb amr-wb anb au avi avr awb cdda cdr cvs cvsd cvu dat dvms f32 f4 f64 f8 ffmpeg flac fssd gsm gsrt hcom htk ima ircam la lpc lpc10 lu m4a m4b maud mp4 mpg nist ogg prc raw s1 s16 s2 s24 s3 s32 s4 s8 sb sds sf sl sln smp snd sndfile sndr sndt sou sox sph sw txw u1 u16 u2 u24 u3 u32 u4 u8 ub ul uw vms voc vorbis vox wav wavpcm wmv wv wve xa
PLAYLIST FORMATS: m3u pls
AUDIO DEVICE DRIVERS: alsa ao oss ossdsp pulseaudio
(no mp3 mentioned there).
The reason I try to play mp3 files with sox is that I wanted to play a playlist with different formats and feed it to ices2 through a pipe, ie :
sox Musik/storlista.pls -t raw - | ices2 ices-pcm.xml sox
FAIL formats: no handler for file extension `mp3'
View 3 Replies
View Related
Jan 31, 2011
Whenever I plug my Zune in, Rhythmbox recognizes all the songs on it but when I doubleclick on a song to play it, the song doesn't play and Rhythmbox quits. Any suggestions on how to fix it? I'm running a Dell XPS 410 with 4GB RAM and a 1.75 GHz processor.Also, I imported a CD and it plays fine.
View 1 Replies
View Related
Aug 23, 2009
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
View 2 Replies
View Related
Jun 22, 2010
I have ushare server connected to my 360 and its working fine, I can see my videos and watch them perfectly, but my music or mp3's arent displaying on the 360 properly at all.
In the video library it displays all the sub folders with the videos in them first and then the video files that arent in a folder, thats normal for me. But the music libray is only showing 1000 files and half of it is the album art jpg files etc. I have well over 30,000 mp3's and 98% of them are organised into folders etc.
Why its sharing my files in this way?
View 2 Replies
View Related
Jul 9, 2010
First time i installed and set config up it did fine now i get this error
Interface eth0 is down.
Recheck uShare's configuration and try again !
uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server.
Benjamin Zores (C) 2005-2007, for GeeXboX Team.
See http://ushare.geexbox.org/ for updates.
bind: Address already in use
i tried switiching to wlan0 and i still get the same error
View 1 Replies
View Related
Nov 22, 2010
I have multiple hard drives with videos on them and i can only get the my xbox to read the 1st in my list of directories. So i wanted to know can i run multiple instances of ushare and use one for each hard drive? Is it possible?
View 3 Replies
View Related
Sep 13, 2010
I downloaded the xvid codec from: PackMan:: Informationen zum Paket xvidcore, and the install was successful.I'm trying to play an xvid file, and Kaffeine is saying it cannot play all file formats, would I like to install additional support. When I click yes, it asks me for additional repositories.
View 3 Replies
View Related
Mar 14, 2011
I want to play my videos on my xbox off of my pc [ubuntu10.10]. I have Ushare configured as follows:
USHARE_NAME=tom-ubuntu
USHARE_IFACE=xbox (I created a new wired connection in the network manager (IPV4 set to shared to other computers and that's what I named it).
USHARE_PORT=49200 (not sure if that's correct or how I'd go about finding the port)
USHARE_TELNET_PORT=
USHARE_DIR=/home/slayton/Videos/
USHARE_OVERRIDE_ICONV_ERR=
ENABLE_WEB=yes
ENABLE_TELNET=no
ENABLE_XBOX=yes
ENABLE_DLNA=no
On my xbox I go to test PC connection. It connects to the network but not the PC and goes to PC Not Listed.
View 1 Replies
View Related
May 19, 2011
all the tutorials i found for ushare and mediatomb shows it installed on desktop and not server. it also requires an account to be logged in. once logged it, you have to run a command to start it up. some questions.
1) is there a way to run either one w/o having to log into an account? so if say i restarted the server, it'll run the programs w/o me having to log in.
2) i would like to specify a directory to share music and movies. is one better than the other? clients that i plan to use are songbird, itunes (maybe), and vlc - maybe xbox 360 and ps3. other client suggestions?
3) other dlna server suggestions? this will be running on ubuntu 10 or 11 desktop or server. but the main thing i'm looking for is what i mentioned in #1.
View 3 Replies
View Related
Jul 30, 2010
I'm trying to us ushare to stream music and video to my 360. I have ushare setup and my 360 sees ushare but none of the files I'm trying to stream. When I run ushare -x it only sees the two folders I'm sharing and none of the files.
View 9 Replies
View Related
Jan 21, 2010
I am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies
View Related
Aug 9, 2011
Normally I find everything I need either in the documentation or forum, but it's been months, and this time I'm stumped. I'm posting the results of my latest tests, so I'm really sorry about the length of this post.
I can't play DVDs unless they've been burned by myself or a friend. I had no problems until around the beginning of April. I was running 11.2 on both my laptop and desktop. I think an update changed something. This was before 11.2 was officially retired a week or so later. I wanted to upgrade to 11.4 anyway, so I began with my laptop. During installation I wiped everything from my hard disk by creating new partitions and formatting them. After installation I installed the multimedia packages using one-click (opensuse-guide.org, not opensuse-community.org, although I did read what they said). I know one-click is not ideal, but I was curious. The result was that I still couldn't play DVDs.
I did a fresh installation, just to be on the safe side. This time I installed the packages according to Multi-media and Restricted Format Installation Guide by caf4926. But I still couldn't play DVDs, so I went through the thread Check your multimedia problem in ten steps. Then I ran mmcheck (v2.35). I tried a few times, experimented, and in the end did another fresh install.
In the meantime, on my desktop, which still has 11.2 on it, I found the file which had been changed and changed it back, so I could play DVDs on it again. It was in /etc/udev/rules.d/, 70-persistent-cd.rules. This does not appear to be the problem in 11.4 on my laptop.
I have again installed the packages according to the multimedia installation guide, and done the ten-step check and run mmcheck and these are the results as they stand:
I couldn't find a package called mplayerplug-in. I used zypper to look for it.
I tried installing the totem packages in a previous installation, but they didn't make a difference, so I left them out this time.
I deinstalled my jdk, but it doesn't seem to have made a difference, except that I get an error notification everytime I want to use LibreOffice. And I need it, so I'm putting it back soon.
So, these are my packages:
And this is what happens when I try to play a DVD using Kaffeine (since I don't an error message except from Kaffeine, and I've forgotten where my logs are):
And then comes Read error from: Error reading from DVD over the GUI.
And nothing else happens... I get no feedback from smplayer whatsoever. It opens, trys to read the DVD, and sits there. Even on the console.
View 4 Replies
View Related
Nov 24, 2010
I just installed 11.4 and its working like a dream, only I cant seem to play .avi files. does anyone know a solution for this?
View 8 Replies
View Related
May 30, 2009
I just installed ushare on Fedora 10 (yum install ushare is all it took to do), and followed the guidance then to configure sharing for an Xbox 360, [URL] the code below. Notice the last line...due to stopping process in the terminal via Ctrl+C. It appears to me, based on this ending UPNP sharing, that the first line will need to be run each time want to turn on sharing, right? I thought this would simply configure ushare sharing one time, and possibly intiate some sort of file sharing service on each boot, but this appears not to be the case. If I am right, does anyone know how I can develop a script to run at boot to allow ushare to open sharing and keep it open?
[Code]....
View 3 Replies
View Related
