Ubuntu Multimedia :: Ubuntu 9.10 No Sound For Xbox360 Connection
Apr 6, 2010
I'm running Asus M2N32-D motherboard which has on-board sound.
I also have a 24' monitor which I connect the Xbox 360 to, and the PC. Xbox 360 takes up the VGA connector, and the PC runs through DVI connection.
The connection that goes from Xbox 360 has a splitter basically one end is VGA, other end is a sound output a White / Red splitter which connects into a regular 3.5mm audio jack which then plugs into the motherboard input sound device. Here's a pic of the wiring harness I use:
The white / red ends plug into the 3.5mm audio jack which then goes into the back of the PC in the Input jack.
In windows, I only have to turn on the xbox and switch the output on my monitor, and then use my PC speaker system to have xbox sound, and PC monitor to have the video come in.
In ubuntu, everything works the same except there is no sound coming in, so basically either I'm missing a driver somewhere, or the sound is turned down by default. (In windows, this option is turned down to 0 by default).
View 2 Replies
ADVERTISEMENT
Jan 7, 2011
I want to set up a media server on my OpenSuse 11.3 machine for sharing mainly video files (mostly .mkv) to my xbox 360 and my other windows 7 pc.
View 6 Replies
View Related
Dec 7, 2010
Does anyone have experience of the above? My Xbox automatically identifies my Windows 7 laptop and allows me to stream videos from it to my TV.
Can you do the same with Ubuntu? I would love to hear anyone's experiences.
I'm not very experienced with Ubuntu or unix generally.
View 2 Replies
View Related
May 16, 2010
I've installed Lucid Lynx in both kubuntu and xubuntu variants, and experienced the same problem, (Note I'm also still running 9,04,on the same computer, trouble free). With 10.04, the problem is that sound playback software works initially, but drops the connection with the sound driver randomly, at times varying from a few seconds to a couple of minutes. It seems to happen regardless of whether Alsa or PulseAudio is set as default. This happens with Movie Player, VLC, Audacity, and with Flash in Firefox - they all appear to start normally, with sound, but soon fail. (Again, I don't have this problem with earlier releases, using the same computer) I know little about sound configuration.
View 5 Replies
View Related
Mar 9, 2010
On my Acer laptop, I have Ubuntu 8.04.4 LTS and a static version of the Skype Beta 2.1, specifically version 2.1.0.81. I recently made the upgrade to it from an earlier version because I needed to have the screensharing feature to work. Previously Screensharing from others was showing up in a tiny window I couldn't resize. But the Skype Beta 2.1 works fine regarding screensharing.
But the problem I'm having now is that the sound intermittently goes away, but only for Skype. It seems to go away if I walk away from my laptop for a long time. When this occurs, I cannot hear or record sound through Skype, but it works fine through other applications. If I shut Skype back down once it is in this failed state, and come back in, then it remains in this failed state. The only resolution is a reboot, and then it's fine again.
The only thing I can think might be the issue is the Gnome Power Manager, perhaps? I mean, my fan on my laptop spins down if I walk away for a long time, so I know some kind of laptop power management is engaging.
I tried following this guide:
[URL]
And it suggested removing PulseAudio and using esound instead. Well, I tried that and rebooted, and my desktop wouldn't boot properly. So, I did CTRL+ALT+F2, logged in, and then did "sudo apt-get update; sudo apt-get install ubuntu-desktop". All was well again, but unfortunately it brought back PulseAudio again.
View 4 Replies
View Related
Jan 4, 2010
i have both pulseaudio and gstreamer installed, my "multimedia audio controller" claims to be a ESS Technology ES1988 Allegro-1 in the system information window and in the report i generated it says my Audio Adapter is "MPU-401 UART - MPU-401 UART" PulseAudio tells me Connection failed: Connection refused and the volume control that came with the system says No volume control GStreamer plugins and/or devices found. I am not understanding, here. do I need some driver that i don't have? i installed all the gstreamer plugins that seemed to pertain to volume that i could find. If i am not very much mistaken, I am using Debian Lenny.
View 5 Replies
View Related
Dec 10, 2010
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies
View Related
Jul 4, 2010
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
View 9 Replies
View Related
Jan 26, 2010
It is most certainly my fault but I am now without a sound volume control and it does not show up in the add to panel.What can I do here? Does your icon have code that that I can use or can I find the file somewhere and create a link? Alsa mixer works ok and nothing is muted and I have sound so as to play music. The Internet connection and the power connection icons also don't appear.
View 5 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Dec 20, 2010
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
Jun 10, 2010
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
View 1 Replies
View Related
Nov 29, 2010
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
View 1 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
May 8, 2011
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Feb 16, 2010
I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
View 5 Replies
View Related
Mar 14, 2010
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
View 2 Replies
View Related
Mar 15, 2010
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
View 5 Replies
View Related
May 8, 2010
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies
View Related
Aug 10, 2010
I recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!
Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...
View 1 Replies
View Related
Sep 11, 2010
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
View 1 Replies
View Related
Mar 30, 2010
I have a Logitech X-540 5.1 surround sound system for my ubuntu 9.10 64 bit box. When I go into sound from System -> Preferences -> Sound, I set the onboard sound card to 5.1 Analog Output. When I do this, all the of the audio I listen to from Banshee and VLC has a light jingle to it, kind of like constant sleigh bells (they're definitely not supposed to be there.) However, when I change it to anything other than 5.1, say stereo, 5.0, 4.1, or 7.1 (I keep it on 7.1) it works just fine. I'm using ALSA to output sound, could this be the cause of this? I haven't found anyone else with the same problem online, so I'm not really sure what's going on.
View 3 Replies
View Related
Apr 17, 2010
Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
View 6 Replies
View Related
Jun 9, 2011
My sound card infomation:
Intel 82801I (ICH9 Family) HD Audio Controller
nVidia Audio device
In my ubuntu 11.04, the sound seems not so clearly, seems something bass.
It's OK in windows 7.
I don't know how to config the sound card, or, is there any drivers updates on my sound card?
View 1 Replies
View Related
Jul 5, 2011
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies
View Related
