Ubuntu Multimedia :: Tevii S650 Showing Signal When No Cable Plugged In
Oct 28, 2010
I am trying to get my tevii650 usb DVB-S2 tuner working. I seem to have installed all the correct drivers as far as I can tell.
When I scan for services and then use femon to look at the signal strength femon -H, I get a signal of around 83% with 0 SNR and BER. Then if I remove the feed the signal goes UP to 97% 0SNR and BER.
I am trying to monitor signal the signal level coming down from the satellite. I don't even want to be able to tune to any of the channels. Basically I want to use the PC as a glorified signal meter and datalogger.
View 1 Replies
ADVERTISEMENT
Jul 21, 2011
I am running 11.04 on a new Gateway with 8 gigs of ram. It is a solo installation. The monitor is connected via an HDMI cable. Everything was great (installation running smoothly for over a month) until last night. I just installed a netgear router and was setting it up with the system to try to get Stanza on my IPAD to connect to Calibre. Anyway, i suffered a severe freeze up warranting a hard boot. I could see the drive working, ancillary drives lit up, keyboard lit up so I know the system is working. The monitor did not come on, It shows a yellow light indication no signal. It is a 28" Hansspree. I tested the monitor by hooking it to a laptop. The monitor is fine. I cannot see anything on the screen so I can't boot to repair mode or use a CD. There is no signal.
View 1 Replies
View Related
Dec 23, 2009
I am working on h/w device having linux kernel version 2.6.27 with busybox installed. I observed below problems while working on jffs2 image is flashed on the board.
1)When the board is powered-up with n/w cable is connected, it doesn't get IP address automatically, I have to use "/etc/init.d/networking restart" in init script(/etc/init.d/rcS) to get the IP address.(I am using dynamic addressing)
2)When the board is powered-up with n/w cable is unplugged and plugging-in once the device is started, I get "link up" message from the system, but still the IP is missing in eth0 interface.
I have udhcpc(v1.14.1) installed. Giving below commands manually, get the IP for device:
Code:
ifdown eth0
/etc/init.d/networking restart
but It is not pretty solution for me !
What I want is, the device should get IP address automatically once the n/w cable is plugged-in. (as we get in desktop m/c's). Am I missing some scripts or configuration parameters?
View 1 Replies
View Related
Jan 27, 2011
When the ethernet cable is plugged in, it doesnt work. I have to unplug the cable, refresh the page and let it wait for the connection, after a second or two, i plug it back in, and it works. this works only for that page, which means only that page loads.. if i try to open another site or smthing else, it doesnt work and i have to repeat the exercise for the new site..i have to unplug, refresh and let it wait for connection and plug it back in.. The same thing happens if i try to download an application.. i have to first issue the command to download, and when it says "connecting to blah blah.." i plug the cable back in and it starts downloading, it doesnt work if the cable is already plugged it..!
View 9 Replies
View Related
Dec 15, 2010
I have a kubuntu 10.04 box and it runs virtualbox with windows 2000. For the most part, the network cable will be plugged in and i should be able to rdp into my windows 2000 install just fine, however, for testing purposes and for backup server testing, I will not have the cable plugged in all of the time.How would I rdp into that windows 2k install on the same machine if no cable is plugged into the ethernet port?I have both the kubuntu install and the windows 2k install setup with static ip's, but it is not working.
View 13 Replies
View Related
Apr 2, 2011
Is there a way to have linux connect to the network when the ethernet cable is plugged in? I'm using Gentoo Linux, and I haven't found the right setup for the conf/net that'll allow me to do that.
View 1 Replies
View Related
Jul 9, 2011
I have a debian-powered NAS (Buffalo LinkStation) and I want to configure the following behaviour: When ethernet (eth0) is plugged in, connect and get a static ip address (ie. 192.168.0.11) When a wireless usb-adapter (wlan0) is plugged in, connect to a wireless router (ie. "Ankkanet") get another static ip address (192.168.0.12)
My /etc/network/interfaces :
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
[code]....
what could be causing wireless to disconnect when ethernet cable is unplugged?
View 3 Replies
View Related
May 5, 2010
I have been encountering this problem, not only on 10.4, but on older versions too: I use a wifi router to connect my laptop to the Internet, but sometimes I need to connect directly to another computer to move some files over GLAN. But Ubuntu's Network manager doesn't allow me to configure the eth0 interface without specifying a gateway (no gateway = grey submit button), but when a gateway is specified, it always rewrites the default gw specified already by the active wifi connection and returns back after unplugging the eth cable.
Of course this can be solved by a few route commands, but this is unacceptable since it is needed to establish the cable connection without any further assistance from within and as well without replacing the default gw and thus breaking the Internet connection. Is there, please, any possibility how to prevent Network Manager from replacing these routes?
View 2 Replies
View Related
Jul 15, 2011
Acer 5250-BZ475 laptop, fresh install of Ubuntu 11.04. Boots up beautifully as long as an ethernet cable is plugged in. Otherwise, I get to the login screen and have just enough time to start typing in my password before the entire system hangs hard - no mouse, no keyboard, can't even get to a terminal, nothing. Have to hard power off the machine.
It seems to be a problem with the wireless card trying to initialize, but there doesn't seem to be a bios option to disable wireless on this laptop, so I'm a bit at a loss as to how to fix this problem. By the way, wireless works fine if I boot up with a cable connected - I can see all the wireless access points in my area no problem. I just can't boot without a wired connection, which makes my laptop more or less useless when I'm away from home with it.
View 8 Replies
View Related
Jan 19, 2010
For about the past month I have been having a very frustrating problem When I boot the system with the ethernet cable attached it acts as if the cable is unplugged even though the connection light is litWhen I boot the system with the ethernet cable disconnected and wait until it boots all the way to gnome and then plug in the cable everything works fine
View 1 Replies
View Related
Aug 2, 2011
I used my computer this morning, but when I returned this evening, I am unable to reach the internet. Also the light on the mobo where the ethernet cable is plugged in is steady yellow.
My limited experience would tell me it is a hardware failure, but it seems so strange with nothing happening during the day. How might I best diagnose the problem?
View 8 Replies
View Related
Nov 5, 2010
have problems with my Intel 82566MM gigabit NIC. Using the default e1000e module. The module finds and load the nic but it doesn't recognize that i have plugged in cable or not. It always says "cable not plugged in". Using xubuntu now but same problem with regular ubuntu not that i think it matters. I tried downloading and installing e1000 from Intel but it doesn't seem to find the nic at all.
Any suggestions how to work this out? My googling says others too have had problems with this card. Couldn't find any real working solution though. Its Lenovo Thinkpad T61 laptop. Using 10.10 Maverick btw.
View 8 Replies
View Related
Jul 28, 2010
I've got a strange issue. I used without problem my Olmypus camera with oS 11.2 and older but sinds 11.3 and the new KDE, nothing happens anymore when I plug my camera: nothing appears in the device notifier, nor in Dolphin. It did in the past, with oS 11.2 and KDE 4.3.x. But, in IceWM, with Dolphin and Digikam it does work (it appears like a USB stick). Not in KDE with the same applications.What I wrote in the bug report:
Steps to Reproduce:
1.Plug your digital photo camera in a USB port
2.Optional: open Dolphin
Actual Results:
Nothing happens
[Code]...
View 9 Replies
View Related
Apr 12, 2011
Wireless does not turn on until nic cable is plugged in. Soon as I plug in a nic cable the wireless light on laptop comes on.
View 4 Replies
View Related
Mar 28, 2011
I'm running Windows 7 Enterprise and noticed something new. The system icon for battery life is showing "plugged in, not charging." Does this oddity occur in Fedora too?
View 6 Replies
View Related
Oct 12, 2010
how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
View 8 Replies
View Related
Feb 5, 2010
I am currently using an Acer Aspire One with UNR on it, and I have discovered that while the internal/built in speakers work, when I plug speakers in to the headphone jack, they don't work. Is there any reason for this and any way I can fix it?
View 1 Replies
View Related
Jun 14, 2010
I have no sound when the headphones are plugged in.
View 9 Replies
View Related
Feb 19, 2010
I'm using Ubuntu 9.04 and Hipo version 0.6.1. Whenever I open the program and the Ipod is plugged, I receive the following message "Detected unsupported database version 42" Details: at IPod.DatabaseRecord.Read
(IPod.DatabaseRecord db, System.IO.BinaryReader reader) [0x00000]
at IPod.TrackDatabase.Reload (Boolean createFresh) [0x00000]
at IPod.TrackDatabase..ctor (IPod.Device device, Boolean createFresh) [0x00000]
[code]....
View 1 Replies
View Related
Sep 1, 2010
I'm sure this has probably come up before, but I could't find an already existing thread. I have ubuntu 10.04 and when I plug my headphones into the headphone jack, they come on, but the speakers don't shut off.
View 3 Replies
View Related
Sep 23, 2010
I'm just installed 10.04 on a new Gateway DX4300. The integrated sound card is a Realtek AC1200. Sound works great, however, I'd like the rear input to mute when I plugin my headphones in the front input. Where can I configure this? Here's some basic information:
[Code]...
View 9 Replies
View Related
Mar 9, 2011
I've been bashing my head against this problem for weeks now. The problem is that my external speakers are not being muted when I plug in headphones. I get sound through both the speakers and the headphones at the same time. This is happening on every Linux distro I've tried so far on this box, but in Windows everything behaves as expected. I've tried every option I have in both alsamixer and the Gnome sound preferences, to no avail.
Curiously, if I mute any one of the audio channels or toggle the headphone switch in alsamixer, all sound output is muted, to both the speakers and headphones. The audio chipset is a Realtek ALC888, on a Gigabyte GA-770TA-UD3 motherboard (6 jacks, optical and coaxial S/PDIF out). I must've tried a dozen different models in /etc/modprobe.d/alsa-base.conf, and none of them seem to make any difference at all.
View 6 Replies
View Related
Apr 27, 2011
I have issues with my sound board configuration. My speakers don't mute when headphones are plugged in and my mic doesn't work good.
I have being readed all kinds of forums and I found that the main issue is in that maybe the ALSA is not using the correct model.
I tried modifying the archive:
With different kinds of models but I couldn't found the right one. I tried all the Lenovo ones that I found in:[url]
My laptop is a Lenovo G455 and my sound board is an ATI Technologies Inc SBx00 Azalia (Intel HDA)
I love Ubuntu but this is bothering me since I upgrade to version 10.10.
View 1 Replies
View Related
Jun 30, 2011
I am running Ubuntu 11.04, fresh install (32bit) on a Toshiba Satellite pro laptop and I am unable to get Ubuntu to recognize the camera is plugged in.When I ran 10.10 it was a simple plug and play approach and I have searched the forums for some guidance with no success.
View 7 Replies
View Related
Dec 22, 2010
Is it possible to up the resolution to the TV's full potential of 1080p? It will currently only go as high as 1360 x 768.
I am using a VGA cable fromm my laptop to the TV
View 7 Replies
View Related
Mar 18, 2010
Using 9.10 on dual boot P4. Try to use a USR 9602 voip phone plugged into USB port (this device works on WinXP)It does not show in Sound Preferences. I have tried on a different computer with U9.10 and same problem
[Code]...
View 9 Replies
View Related
Feb 28, 2011
I installed a minimal version of Ubuntu, and now Amarok doesn't seem to realize my iPod's plugged in. I have libgpod installed; what am I missing?
View 3 Replies
View Related
Aug 23, 2010
there doesnt seem to be a software in linux that allows that and the mim dv doesnt get recognized at all.
View 2 Replies
View Related
May 3, 2011
I would like to try tvtime on my Dell PC, bu I do not understand how to use the encrypted signal from comcast cable. I realize I will need to purchase a tv capture card. What is the best one for a Intel Core I3? Is there a USB version that will work?My TV is hooked to a TIVO HD box that has a comcast cable card. Is the signal decrypted by the cable card and then is it just necessary to obtain the decrypted signal from the TIVO output?
View 3 Replies
View Related
Sep 25, 2010
In Ubuntu 9.10, I was successfully able to use my Pinnacle Dazzle DVC 100 (a cheap USB analog video capture device). I use it for backing up old video that is stored on tapes, and it isn't working with my current install of Ubuntu 10.04. When I plug the device in, it should be detected and the em28xx module should be loaded. This fails and /var/log/messages has the following:
Code:
Sep 25 16:13:18 kernel: [1196215.111898] usb 2-2: new high speed USB device using ehci_hcd and address 20
Sep 25 16:13:18 kernel: [1196215.266097] usb 2-2: configuration #1 chosen from 1 choice
[code]....
View 3 Replies
View Related
