I can't find the option for 3d sound, such as "Speaker Fill" in Realtek Control Panel for windows. I searched in sound preferences, alsamixer and pavucontrol with no result. 5.1 surround sound for movies is working good, so there is no problem with hardware or compability with ubuntu, I think. What should I do? "Speaker Fill" is very useful option.
View 3 RepliesI'm using a CAD u37 usb condenser microphone for some semi-pro voiceover work. My clients insist on stereo audio. On my windows machine, my mic works just fine, but it's not in very very good place for recording (a bit too echoey). So I thought I'd use my netbook running ubuntu.I can plug my mic in, and it does record sound, but there is no available sound profile that allows me to just have two-channels of input. Can I install a driver or edit a file somewhere that lets me have stereo input?
View 2 Replies View RelatedI have some AVI files that are encoded as AVI files with ac52 audio, which I think is surround 5.1 or something channelized, because I am only using my headphone output to some powered speakers and I can't hear the dialog.I thought there would be an easy way to downmix to stereo, did some searching, and tried under audio menu, to get to audio devices and select stereo.But the option is greyed out whether or not a file is loaded.
View 4 Replies View RelatedBought a new yamaha receiver and have it hooked up to my pc via a y connector on headphone out.
problem: computer speakers work fine when connected to the same audio output described above. when connecting the audio out to my stereo receiver, there is no sound.
the receiver indicates that it is not receiving a signal.
Ubuntu 11.04, with Myth 0.24 and XBMC 10.1. Hardware is an Asus P8H67-M Pro mobo which I bought specifically because it boasts an optical output, which I need to send 5.1 sound to my receiver.
My plan is to set up MythTV for watching TV, and have it send stereo sound directly to the TV via HDMI. This part is working fine.
And then set up XBMC to play my collection of ripped and recorded video, with the sound always going via optical spdif to the receiver. I did have this working on a prototype (different mobo) but now I have my "final" hardware I can't get this bit to go.
The issue seems to be that the OS is only seeing the Optical output as a stereo device - for example if I go System Settings - Sound I can see two hardware devices - "Digital Stereo HDMI" and "Digital Stereo Duplex (IEC95"
I'm new to this area of Linux, so would really appreciate some pointers - I've spent the last couple of hours reading immensely long threads and not getting any wiser! code...
Until recently, when connected my laptop to the stereo via audio out, i had sound coming only from the stereo. I don't know why and when exactly this happened, but now when the stereo is connected, i get sound from the laptop speakers and stereo speakers simultaneously.Is this a bug? I'd like to mute only my laptop speakers but haven't figured out how. I've tried every setting in "sound" or "audio" or whatever it's called in english, but to no avail.Any ideas how to turn off the laptop speakers?
View 2 Replies View RelatedAlright, the lifehacker article about this Acer machine got me interested in revisiting XBMC as a media center. I bought the AR1600-U910H from Newegg and have been struggling for a couple of weeks to get it working correctly. I opted to install a full Ubuntu desktop to utilize the hardware fully with a standalone version of XBMC. I am currently running Lucid with NVIDIA 256.25 (was running 195 series) driver. Switched to 256 because I heard it fixes the no multi-channel output problem. However, sadly I can't get multi-channel out to work. I have the HDMI output going through my Onkyo TX-SR608 receiver for both audio and video. My problem is I can only get stereo sound out while running XBMC (or any application for that matter).
I've upgraded Alsa to 1.0.23. I've installed new Beta 256.25 NVIDIA driver. I've configured Alsa about 28 different times. I'm at my wits end. So, my question is - does anybody having a similar setup with the ION chip (or the Acer Aspire Revo in particular) where they can succesfully get HDMI digital audio pass through to a receiver (or at least digital multi channel out)? The best I've gotten is 2 channel audio, which doesn't do a lot of good on a 5.1 setup. If I would have known getting multichannel audio would be so difficult I would have rethought starting this endeavor. I don't care if I have to do a fresh reinstall of everything - if that means a different version Ubuntu so be it.
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
I have an issue with the voice channel on certain MKV fikles being really low compared to the music and sound effects. I've found an explanation and solution for Windows for this, but nothing for linux.
[URL]
how to get the same kind of result in smplayer or xine or VLC? For info, playback is fine through headphones - no channel imbalance.
I have updated my Ubuntu to Lucid 10.04 from 9.10.
Although my sound disappeared in 9.10 only, I thought maybe upgrading might help, but there is no change.
I guess everything is installed fine.
But still aplay -l command shows "NO sound cards.. "
Moreover the sound preferences shows no hardware, no input and a dummy stereo output.
I have banged my head a lot trying various things written in forums and all but no success.
One more thing : When I test "osstest" , I get sound in both the earphones , but altogether there is no sound. I am very much confused.
What it says on the tin really. Whenever i set my sound preferences to 5.1 analog surround i get a sort of high-pitched whine/buzz coming through the speakers along with the regular sound, however if i switch to stereo duplex, it vanishes.
View 4 Replies View RelatedI need to know how to setup Ubuntu 10.10 64-bit to record what's called the "stereo" and "mono" mix popular in Windows where it records anything playing out of the speakers. The goal is to play the microphone through the speakers at the same time background music is playing and thus record both. I also need to know how to play the microphone through the speakers.
View 1 Replies View RelatedI have a home media server that usually is running headless, as its only display is our TV. For the last year or so, I've used it as a component in our stereo, running Banshee via tunneling x to a server on either my phone or another computer via ssh. Please note I know that X doesn't handle sound, the idea is that the remote computer controls the media center which is hard-wired into our speakers.
This has worked great with Wheezy for about a year, and for several months with Jessie (up to like the end of February) when I started to have general sound issues with my install. I spent a few months running Ubuntu and now that Jessie's released I re-installed it last night.
Banshee runs great on the local X server- no issues. It also runs acceptably under XServer XSDL on my phone (it won't continue playing songs after the current song ends, unless I re open the X server app and then it sort of wakes up.) But when I try and log in from a remote computer (either another Jessie computer or Ubuntu 14.04.2) it says it's playing but no sound.
Here's what it's saying in the terminal on the Ubuntu computer while it's trying to start playing on the media computer
Code: Select all[Warn 09:39:01.506] DBus support could not be started. Disabling for this session. -
System.NullReferenceException: Object reference not set to an instance of an object (in `dbus-sharp-glib')
at DBus.BusG.Init (DBus.Connection conn, DBus.GLib.IOFunc dispatchHandler) [0x00000] in <filename unknown>:0
at DBus.BusG.Init (DBus.Connection conn) [0x00000] in <filename unknown>:0
at DBus.BusG.Init () [0x00000] in <filename unknown>:0
at Banshee.ServiceStack.DBusConnection.Connect (System.String serviceName, Boolean init) [0x00000] in <filename unknown>:0
[Code] ......
This install is running the released Debian 8.0.0 and has the MATE desktop. I really don't have a choice other than Banshee because the majority of my library is encoded as .ogg files and all the metadata is saved in banshee.db as opposed to in the files.
I've done a search on google and on here regarding my issue and I couldn't see anything.
I have the following audio device;
Code:
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
At the moment I have it playing through Analog Stereo Output. (See attached image)
The sound is mostly flawless and I haven't been having troubles with it.
But, because I play audio through my logitech speakers (2 speakers, 1 subwoofer) I should be able to get digital stereo sound shouldn't I?
From the drop down box of the attached image there are two options for Digital Stereo;
Digital Stereo Duplex IEC958
Digital Stereo IEC958 Output + Analog Stereo Input
None of them work for me. Even if I do a restart, I get no sound from Rhythmbox or Firefox.
I use the pulseaudio sound server and I have the PulseAudio device chooser installed. When I had the Digital Stereo Duplex IEC958 selected I used the Volume Meter playback to see if there was any sound coming through. Both left and right showed activity but nothing came through the speakers.
I bought this Radeon 4670 [URL] to improve my video. Although the description on ATI-AMD webpage [URL] specifies that this card can output up to 7.1 audio through HDMI, Sound Controls only shows the stereo and off option. ATI Catalyst does not have any controls for audio. Is there a way to get 5.1 audio enabled? Using 10.04.
View 8 Replies View RelatedWhen I use my ubuntu computer to watch some movies that are encoded into 5.1 sound I can't hear the voices of the people in the movie. I guess that is because the voices are put on the front speaker and I have connected the computer to an stereo-amplifier.
I mainly use XBMC and have noticed the problem there but I have also tried VLC and noticed the same problem there. In xbmc I checked the box "Downmix multichannel audio to stereo" but it doesn't work.
I use a standard ubuntu 10.04 64-bit install that was upgraded from a 9.10 install.
I am at the end of my tether in trying to get sound setup on my Ubuntu installation. I have tried many different 'fixes' that people have suggested, but none seem to work!
My setup is as follows:
> HP Proliant Microserver
> Ubuntu 10.10
> Zotac GT210 card
> HDMI from GFX card to AV amp
> 5GB Ram
What I want to be able to do is:
> Play music from FLAC files I have ripped in either stereo or sudo 5.1
> Play DVD iso files that I have ripped in the audio format found on the original discs (DTS etc)
I have managed to get sound working before, but only in stereo and I couldn't get it working in XBMC (not the sound from the main movie I chose anyway). I have since completely broken the sound after trying various things found on the interweb and cannot get it back.
[Code]....
I recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
how can i get all the effects in csm? i have install csm but i dont have all effects.
View 2 Replies View RelatedI did all my editing in after effects, and I'd rather not have to learn a hole new program, so if there is anything similar that would be great.
View 3 Replies View Relatedkubuntu 11.04
I just installet pitivi, but see no tab with video effects. I have gstreamer with plugins and frei0r filters installed.
I have an HP Proliant DL380 G6 server (relatively new), and I can't enable desktop effects. I'd think even a recent integrated GPU would be able to do this right? Why can't I do it?
View 4 Replies View RelatedI like my wobbly windows, love 'em. Recently on the latest ATI manual driver update they went away. From boot, log into desktop, my pidgin window defaults to open. Can move it for about 1.5 seconds and be wobbly then the screen does it's reinitialize thing and the window becomes non-wobbled again. At any time I can go to System > Preferences > Appearance > Visual Effects and enable the effects and they work without issue. So, start up with visual effects, something right away turns them off, I can turn them back on at any time and they will stay on. I don't think its actually anything to do with my graphics cards drivers - those seem to be fine. Rather I believe it is a Gnome setting somewhere. I have tried setting my Visual Effects to None, rebooting setting them back to where I like them and rebooting again in case it was a corrupted setting.
View 7 Replies View Relatedback when I was Windows Vista (the pre-installed OS on my laptop), whenever I would activate my webcam through skype, I separate program would also initiate. This program would give me the ability to alter the image, like black and white, fish-eye, etc.Is there anyway to get skype to activate cheese webcam so I can use its effects?
View 3 Replies View RelatedI have played around a bit with the Open Shot Video Editor and just download Kdenlive. I am trying to teach myself how to create and edit videos by inserting music, transitions, etc. However, I want to add special effects such as fireworks, explosions, get text to light up, blur, etc, and add sparkle type effects. I know Open Shot won't do this and it does not look likve Kdenlive will either. Trying to find something that will jazz my videos and almost give them a semi professional quality to them. Is there any other Open Source video editor type program that can do special effects like what I am looking for?
View 2 Replies View RelatedDoes anyone know of a program that can create effects like reverb/echo during a live performance? I like Audacity, but it seems you can only do this kind of stuff to audio that has already been recorded, not while you are performing it live.
View 1 Replies View RelatedMy new machine with a fresh install of Lucid boots up and displays the standard gdm login screen showing the list of users which looks fine. After you hover over a name or other option menus on the display, the pop-up or screen change is rendered poorly. It very slowly fixes itself over time. After I login everything works just fine even with the extra "desktop effects" I recently discovered that if I set the desktop effects to none, I get the same effect on my desktop. I've attached a screen capture to illustrate what I see but find hard to describe. The little horizontal bars will gradually be fixed over a minute or so. Dragging the window around smears that effect around the screen. I've been sniffing around the web off and on for a couple months now but haven't found anything that sounds similar.
Now for some hopefully helpful configuration data: This system is based on an Asus M4A89GTD PRO/USB3 motherboard with integrated ATI radeon video, and a 6 core processor. Lucid 32bit.
$ uname -a
Linux gandalf 2.6.32-26-generic-pae #48-Ubuntu SMP Wed Nov 24 10:31:20 UTC 2010 i686 GNU/Linux
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 4290
OpenGL version string: 3.3.10317 Compatibility Profile Context
[code]....
I've just finished my new build and installed Ubuntu 10.04 LTS.I have in it an MSI N8400GS D512D3H (NVidia Geforce 8400GS) which I thought would work for Ubuntu. After installing Ubuntu the visual effects are disabled, can't even get "Normal" settings in the Appearance dialogue. Updates have all been installed. Apt has been updated. "Hardware Drivers" screen draws a blank. No proprietary drivers listed at all. First time I've actually used a Graphics Card in an Ubuntu install.
View 6 Replies View RelatedI have Samsung NP145 with intel atom n450
And this is what terminal says: 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Do graphical effects work on my netbook?
I'm using two monitors with an ATI Radeon X600 card in Ubuntu 9.10. I got the duel monitors to work by running sudo Xorg -configure, but now my desktop effects don't work. How can I get them to work again?
View 6 Replies View Related