Ubuntu Multimedia :: PBS Videos Missing Controls?
Jul 18, 2010
I have both a 64bit 10.04 install with firefox 3.6.6 and flash player 64bit version 10 and a 32bit 10.04 netbook edition with firefox 3.6.6 and flash player 10.1. They both are missing the overlay controls.Here's an example link:The pbs kids site has the "BIG" button which allows me to go fullscreen, but then I just get audio on the 64bit machine. I haven't tested that on the netbook version yet.
View 2 Replies
ADVERTISEMENT
May 15, 2011
Just put 11.04 on my core2 machine (3 GB ram, Nvidia 250 gts) and graphics just aren't right. Installed the recommended Nvidia driver, did updates. Where is my X to close apps? used to be at top right of running apps. Can't drag apps around by the top bar anymore. Enabled Desktop switcher and it doesn't work. Won't switch desktops. Are these bugs I'm experiencing or what?
View 4 Replies
View Related
Nov 2, 2009
I have Fedora 11 installed on two different machines, one 32 bit and the other 64 bit. If I play an mp3 file in the 64 bit system---it doesn't seem to matter which player I use---then I can only start, stop, or go to the beginning or end of the selection. I can't advance the stream to some intermediate point. The slider display showing the position is greyed out. The same programs on the same file in the 32 bit system work normally and allow me to advance the position by using the mouse with the slider. This may have something to do with how gnome is configured on the two machines, but I can't figure out what is different.
View 1 Replies
View Related
Jan 3, 2010
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there. Ubuntu Karmic 9.10 - all updated as of 1/2/2009 Firefox 3.5.6 On a Lenovo Thinkpad R400
It has never worked. About to pull my hair out and/or reinstall Ubuntu Completely since no one else seems to have to problem.
View 1 Replies
View Related
Jan 9, 2010
I am running Karmic 64bit on a frankenstein desktop. I am using an old Creative Soundblaster card with the live drive front panel. Ever since I started using Karmic I have lost many functions, there are no bass and treble controls, and no other controls other than volume and balance. Am I missing some vital drivers?
View 4 Replies
View Related
Mar 9, 2010
I want to hide the controls of Movie player (totem). I can hide it by going to view->show controls. but when I reopen Totem, it shows the controls again. it seems Movie player does not save the settings correctly.
View 2 Replies
View Related
Aug 6, 2010
Possible to have the Movie Player launch with the "Show Controls" option off?
View 1 Replies
View Related
Sep 20, 2010
OS: fresh installed 10.04.1 64 Bit,
Kernel: 2.6.32-24-generic
Mainboard: Gigabyte GA-G41MT-ES2L with
# 2/4/5.1/7.1-channel
# Realtek ALC888B codec
ALSA: Alsa Update Script [URL]
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Sep 20 2010 for kernel 2.6.32-24-generic (SMP) .....
View 3 Replies
View Related
Jul 24, 2011
I am using ubuntu 10.04.I am trying to get 6 channel audio output.When i open alsamixer it does not show controls for multiple channels. I have seen on articles i read that alsamixer shows controls for multiple channels.how to configure 6 channel audio output on ubuntu 10.04.
View 2 Replies
View Related
Nov 25, 2015
Qt apps like vlc, kolourpaint, qbittorrent are missing the windows controls like menus. Smplayer crash on opening a video(any format). I'm using mate with marco wm, I also tried openbox but is the same.
View 1 Replies
View Related
May 26, 2010
How do i change the channel gnome-volume-control controls? I want it to control pcm but it controls master front. There used to be a setting right in the sound preferences but i think it disappeared with the 9.10 upgrade or at least i can not find it anymore. I've looked on the at gnome alsa mixer while changing the volume and master front gets controlled while pcm is always set to max. The problem with this is that master front does almost nothing to change the actual volume.
If i control pcm with the alsa mixer the volume range is fine. I've found a manual for gnome-volume-control on [URL].en and the pic there actually looks like i remember it looking. But i can not get to that screen. What i have looks completely different. Its a window with the tabs Sound Effects | Hardware | Input | Output | Applications. But there is no sight of any channel settings and the only slider there does the same as the applet one.
View 9 Replies
View Related
Mar 16, 2011
Im running 11.3 w/ KDE 4.6. I was using Kmix today without issue and accidentally (perhaps out of curiosity) clicked the 'close' box on the tab which presented all of the volume controls. The thing is, I cannot seem to find out how to recreate it. I seem to recall there was some option to create multiple volume control tabs, but I cannot locate.
Could someone point me in the right direction on how to recreate the tab or delete the kmix settings/config which I assume would re-create defaults?
View 1 Replies
View Related
Oct 29, 2010
I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies
View Related
Apr 8, 2011
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
View 3 Replies
View Related
Jul 10, 2011
i want to be able to convert videos into mp4 videos of resolution 320*240 and frame rate 25ps so that i will be able to play them in my phone..any video converter that can do this job for me?
View 6 Replies
View Related
Jan 9, 2010
I can get all the utube videos other website videos , but no BBC videos using U 9.10 and Opera 10.10. They work with FF or Using Opera in Fedora it works fine. I have all the usual Gstreamers, restricted extras/flash player etc. I read just about every post I can but see nothing I do not already have.
View 9 Replies
View Related
Apr 4, 2010
I cannot get AVI videos to play with the Totem movie player that comes bundled with Ubuntu 8.04 on the Dell Mini 9. I keep getting: "Could not determine type of stream." Randomly, one or two of the dozen or so videos on my SD card will work, but most will not. This is very frustrating because all the videos I download are always in AVI format.
I tried used the synaptic package manager find an alternative player and tried MPlayer, but that didn't do anything. I'd just get a blank screen on everything. Using the tutorial in this forum, I got GNOME Mplayer, which also didn't work, but even a video that worked with Totem would only play audio with GNOME Mplayer.
I looked in the repository for video codec updates but didn't see any. What do I do? Is there like a Winamp for Linux? This is a total bummer. I just want to play AVI files that are so commonly used for video.
View 6 Replies
View Related
Apr 14, 2010
I'm trying to find a program where I can edit some hd mkv files. I want to cut pieces of them out and put them together. I was using avidemux but when I went to save it again it said I needed the start point to be a keyframe. It allowed me to save it as an avi, but the color was distorted. I am fine with using avidemux if I can get around this keyframe problem.
View 3 Replies
View Related
May 7, 2010
I have an issue with my Ubuntu both 9.10 nad 10.04.I had the video worked perfectly untill yesterday but now i can see the video hear the noise (cars, music) but no voice of human.
View 9 Replies
View Related
Jun 27, 2010
I had system problems and I decided to do a fresh install and I could only save my home folder and be sure that my system worked. Ever since my new videos never had thumbnails. Is there any way to make sure they do have thumbnails for easy browsing.
View 1 Replies
View Related
Jul 12, 2010
i have an n86 and i am a new ubuntu user. i have been trying to convert some videos and have been unable to find a suitable software.
View 2 Replies
View Related
Jul 31, 2010
I have used ubuntu for a long time but always using either a live CD or my Flash stick.
On past Thursday i decided to install ubuntu on my laptop and i did it . It is light and healthy (ha ha). Any way, I would like to play AVI, MKV, RMVB, and MP4 videos but i couldn't. I tried a lot of debian packages and drives (i.e. files with .deb extension) but no result except installing RealPlay that i am using it to play mp3 files only.
can you give me some packages to play those files. (I can't connect my laptop to Internet for the time being). In addition, I have Huawei E1750 USB Modem but the system does not recogize it. Is there any way to play those videos and surf the net using the modem in UBUNTU 10.04 LTS.
View 9 Replies
View Related
Aug 23, 2010
i just want to know what is best to convert in linux ubuntu 10.04LTS to convert videos!?
View 9 Replies
View Related
Aug 30, 2010
I've been trying to convert flv videos to MP4 so that I can load them onto my iPod Classic 160 G (video).
So far no program has successfully converted an flv file to a usable mp4.I've tried Avidemux (both gtk and qt), Kdenlive, WinFF, Mobile Media Converter, DownloadHelper (FireFox addon) Tragtor and of course the King of them all- FFMPEG. Not one of the previously mentioned programs has successfully and consistently converted an FLV to mp4 for my ipod.
It could be that I'm doing something wrong with FFMPEG or don't have the correct codecs (whatever the heck they are?!) installed or that I voted for McGovern in '68. The "help" from FFMPEG both IRC and their obnoxious email list is beyond deplorable.
Anyway, I need to know a reliable and consistent way to turn flv or any other videos into an MP4 format that will run on my iPod. The program must reside on my machine and not some online converter service. If I have to use FFMPEG (which I understand most programs use as their core) I need to know how to do it....and for God's sake don't tell me to read the online documentation at FFMPEG..
View 9 Replies
View Related
Sep 5, 2010
My Dad who I have just gotten on to Ubuntu is wanting to burn some some avi videos onto a DVD, but wants them in a DVD format though so that he can play them on any type of dvd player. I got him to install k3b and try that but as I've never had to do this I'm not sure my self how to do it so this leads me to ask;
View 5 Replies
View Related
Oct 25, 2010
I have some 10hrs videos with around 6GB in size. Unfortunately avidemux2_cli runs into problems copying certain parts of it into an output file (frames get blur).
So I tried ffmpeg, but even if I use the sameq switch (same quality as source video), the output video is not a 1:1 copy of the source video. In fact the output video is encoded again (and sound is not as in the source video) and that takes ages against a copy activity by avidemux. Is there any other cli program for simply copying parts out of videos?
View 2 Replies
View Related
Oct 31, 2010
I've got an eeepc 1101ha and have installed the latest ubuntu, 10.10, but i can't watch any videos! Besides the original player, i have installed and tried to watch videos in VLC, SMPlayer and GNOME MPlayer but it has always some kind of error. In VLC I can hear the sound. On all others the file simply doesn't work.
View 5 Replies
View Related
May 12, 2011
vlc player is not playing .mov file. Is there any other software for playing .mov format?
View 1 Replies
View Related
Jan 17, 2010
I'm able to get HDMI audio/video perfectly when I'm playing a dvd on mythbuntu. However, If I try to play the ripped version or any other video that is on the hard drive, I get no Audio?
I've checked alsamixer to make sure the device isn't muted.
If I use vlc media player I don't have any audio either. Is there a way to enable hdmi audio as default?
View 1 Replies
View Related
Mar 19, 2010
If I try playing ..... or other streaming video I have no sound. It used to work and then my dumbA$$ tinkered with it and now I have restored Flash, which was working flawlessly, don't know where my head was at but it was dark and smelly.
EDIT: I have Ubuntu 9.10 and my sound card is an nVidia Corporation MCP61 High Definition Audio (rev a2). I tried to follow along with the instructions in the sticky regarding the
Quote:
Comprehensive Sound Problem Solutions Guide
but when it gave me the instruction to select my sound card manufacturer from the drop down menu, I never found it.
FWIW, my speaker are on and they play music, system sounds etc, just no sound for streaming video. Pandora works fine etc. Also, this is isolated to Firefox, as it works fine in Opera.
View 4 Replies
View Related