Ubuntu Multimedia :: No Sound HP Touchsmart?

Jan 23, 2011

I'm sure I sound like a broken record, but I've had Maverick installed for a few days and haven't had any sound output to go along with it. I've uninstalled and reinstalled pulse and alsa a few times over, with no success. Here are my aplay and lspci outputs:

aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1

[Code].....

SOLVED: Via terminal: sudo gedit /etc/modprobe.d/alsa-base.conf At the very end, add a line which says: options snd-hda-intel model=touchsmart

It seems like depending on your type of computer, all you need to do to fix many of the sound issues is change "touchsmart" to whatever you are using (laptop, toshiba, etc.).

View 1 Replies


ADVERTISEMENT

Hardware :: Run HP Pavilion IQ504 Touchsmart On System?

Dec 14, 2008

HP Pavilion IQ504 Touchsmart Inquisitive minds would like to know BEFORE buying one to install Linux on.

View 5 Replies View Related

Ubuntu :: HP Touchsmart Tm2 - Synaptics Touchpad Is Unusable - Change The Brightness Will Kill The Screen

Dec 17, 2010

I installed Ubuntu 10.10 on my laptop and encountered several issues.

1. The Synaptics touchpad is nearly unusable. It is impossible to drag while holding down a button. The cursor will move randomly across the screen instead. It is impossible to right click; a right click is treated like a left click. Double-tapping the dot in the corner does not disable the touchpad.

2. Attempting to change the brightness will kill the screen. The computer is still functioning, and it is possible to perform tasks "blind." Only the screen becomes completely blank.

3. Ubuntu does not always boot up reliably. When it does not, the screen is blank but the computer is otherwise responding.

4. The screen is black after suspend.

5. The computer will sometimes hang when shutting down (showing desktop background). Possibly related messages in dmesg:

[Code].....

View 3 Replies View Related

Fedora Hardware :: HP Touchsmart TX2 Touchscreen Doesn't Work On FC12

Feb 9, 2010

I just switched from FC10 to FC12, and much to my dismay, the touchscreen no longer works. I wasn't able to find a solution on the web, hopefully some gentle soul will answer my problem. The hardware is recognised correctly, because

Code:
hexdump /dev/hidraw0

gives an output when I over the stylus over the screen.

Note: I used hexdump because I couldn't find the wacdump utility anymore. Has it disappeared?

I played with HAL rules so that the appropriate wacom driver is loaded for the tablet. I modified /etc/hal/fdi/policy/10-synaptics.fdi, taken from /usr/share/hal/fdi/policy/20thirdparty/10-synaptics.fdi, as follow (to avoid trying to load Synaptics driver for the touchpad feature of the tablet):

Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">

[Code]....

View 1 Replies View Related

Hardware :: Video Driver For HP TouchSmart - Display Was Not Appearing Correctly

Mar 12, 2009

HP TouchSmart IQ500t
NVIDIA GEForce 9300M GS HD
Intel Core 2 Duo Processor T6400
Linux REL 4 64 bit OS

Tried installing latest NVIDIA driver (NVIDIA-Linux-x86_64-180.29-pkg2) from NVIDIA website for this video card, and the display was not appearing correctly. There was a lot of garbage at the top of the monitor. Half of the desktop screen was missing.

View 1 Replies View Related

Red Hat / Fedora :: Touchsmart Screen Doesnt Support Dual Screen Input

Nov 24, 2010

I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation?
Do some people have experience on this?

View 1 Replies View Related

Ubuntu Multimedia :: Unable To Hear Any Sound At All Using M-audio Delta 44 Sound-card

Jan 3, 2010

I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?

View 4 Replies View Related

Ubuntu Multimedia :: No Sound Coming From Creative Labs XiFi Sound Card

Dec 20, 2010

I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.

View 8 Replies View Related

Ubuntu Multimedia :: Via Vt1708s Azalia No Sound When Starting Jack Sound Server?

Jun 7, 2011

After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.

I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.

I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.

Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?

Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server

if this helps, here is the error message received when jack does not start when the normal duplex option is selected.

21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused

[Code].....

also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.

View 4 Replies View Related

Ubuntu Multimedia :: Lucid 10.04 No Sound As Normal User / But Sound OK As Root

May 1, 2010

I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.

View 6 Replies View Related

Ubuntu Multimedia :: No Sound. How To Restore Default Sound Driver/settings

Jun 10, 2010

I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,

$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Get A 'snap-sound' In Computer Sound From Center Speaker

Nov 29, 2010

For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)

My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?

View 1 Replies View Related

Ubuntu Multimedia :: Sound Stops Working After 1-5 Mins Of Playing Sound?

Dec 14, 2010

Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.

Code:

lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002

[code]....

View 6 Replies View Related

Ubuntu Multimedia :: No Sound Output But Device Shows Up In Sound Prefs?

May 8, 2011

I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.

View 4 Replies View Related

Ubuntu Multimedia :: Tuner Card Not Feeding Sound Through Onboard Sound?

Aug 9, 2011

I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.

Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.

View 2 Replies View Related

Ubuntu Multimedia :: Change The Sound To The USB Headset (sound Output) The Webcam Does Not Work In Skype

Jun 21, 2010

I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04

1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.

View 3 Replies View Related

Ubuntu Multimedia :: No Sound Altough Alsa Mixer Seems To Indicate That Sound Card Works Properly

Nov 6, 2010

I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.

View 4 Replies View Related

Ubuntu Multimedia :: No Sound After Update - When Click Sound Option On Speaker Icon Get Nothing Listed Under Hardware

Feb 16, 2010

I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.

I am using the HP DV2810 US notebook PC. With this being listed as the audio device.

I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.

Upgraded the following packages:

Installed the following packages:

View 5 Replies View Related

Ubuntu Multimedia :: Sound Drops From Hardware Tab Of Sound Prefs?

Mar 14, 2010

I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.

my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:

[Code]...

View 2 Replies View Related

Ubuntu Multimedia :: No Sound In Gnash - ALSA For Sound System

Mar 15, 2010

I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.

When I run Gnash in a terminal, I get this:

Quote:

View 5 Replies View Related

Ubuntu Multimedia :: Lost Sound And Sound Profiles After An Update

May 8, 2010

Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).

View 1 Replies View Related

Ubuntu Multimedia :: No Sound / Phonon 'forgot' Sound Cards?

Aug 10, 2010

I recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!

Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Sound Worked Fine With The Windows 7, But No Sound?

Sep 11, 2010

I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:

System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Jingly Sound Only In 5.1 Sound Configuration?

Mar 30, 2010

I have a Logitech X-540 5.1 surround sound system for my ubuntu 9.10 64 bit box. When I go into sound from System -> Preferences -> Sound, I set the onboard sound card to 5.1 Analog Output. When I do this, all the of the audio I listen to from Banshee and VLC has a light jingle to it, kind of like constant sleigh bells (they're definitely not supposed to be there.) However, when I change it to anything other than 5.1, say stereo, 5.0, 4.1, or 7.1 (I keep it on 7.1) it works just fine. I'm using ALSA to output sound, could this be the cause of this? I haven't found anyone else with the same problem online, so I'm not really sure what's going on.

View 3 Replies View Related

Ubuntu Multimedia :: Sound Card Working...but No Sound?

Apr 17, 2010

Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:

Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****

[code]...

View 6 Replies View Related

Ubuntu Multimedia :: Sound Card Seems Not Sound Clearly In11.04

Jun 9, 2011

My sound card infomation:
Intel 82801I (ICH9 Family) HD Audio Controller
nVidia Audio device

In my ubuntu 11.04, the sound seems not so clearly, seems something bass.

It's OK in windows 7.

I don't know how to config the sound card, or, is there any drivers updates on my sound card?

View 1 Replies View Related

Debian Multimedia :: Got Slim Running - No Sound, On Gdm3 Sound Works?

Jul 5, 2011

Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound

View 2 Replies View Related

OpenSUSE Multimedia :: Replace The On-board Sound Chip With An Add-on Sound Card?

Jun 14, 2011

I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.

Anyone know which of these cards will work on Suse 11.4?

Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS

View 9 Replies View Related

OpenSUSE Multimedia :: When Boot Up, (runlevel 3), Sound Is There Via The Mic/line-in Jack, But As Soon As KDE Starts, The Sound Cuts?

Jun 24, 2011

I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:

View 9 Replies View Related

Debian Multimedia :: No Sound In Iceweasel And Chromium - Otherwise Sound Works

Sep 8, 2011

I can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.

I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.

Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.

This is the output of chromium:

In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.

I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved