Ubuntu Multimedia :: Invalid Format ATI Radeon 3470 HDMI To Tv
Aug 19, 2010
I have a Dell Optiplex GX280 with an ATI Radeon 3470 HDMI card. I'd like to install Ubuntu on this computer, and I'd like to use my Olevia HDTV as a monitor and use it as a media computer. I attach the tv to the computer via HDMI, and boot to the Ubuntu install disk - I'm presented with an 'Invalid Format' error message, and no video on the tv. Is there any way around this error so I can continue the install?
View 3 Replies
ADVERTISEMENT
Apr 5, 2010
I want my computer to be used as a DVD/BD player, and as of recently it has rejected its windows install and refuses to reinstall. Ubuntu 9.10 installed without problem, but when I select the X1200 (hdmi) audio output via the top right icon no sound comes out. I've searched this topic and one theory was that if i ran ALSA mixer the x1200 audio might be muted by default; it was not muted. I've also been told to update my catalyst, but using synaptics packet manager to download the catalyst control center, when I run it I get the message no supported hardware found. Is there any way to get this to work, or am I stuck with my speakers/3.5mm jack?
View 1 Replies
View Related
Dec 16, 2014
I have Debian WHeezy 7.7 KDE, card Radeon 5000 series. Card has HDMI, video on HDMI working, but sound not working. System see sound device, but if I select this and try to play music then no sound. I tried many things. Below is some lists.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
[Code] ....
View 1 Replies
View Related
Sep 9, 2010
I bought this Radeon 4670 [URL] to improve my video. Although the description on ATI-AMD webpage [URL] specifies that this card can output up to 7.1 audio through HDMI, Sound Controls only shows the stereo and off option. ATI Catalyst does not have any controls for audio. Is there a way to get 5.1 audio enabled? Using 10.04.
View 8 Replies
View Related
Jun 22, 2011
I recently installed ubuntu 10.10 on HTPC, after having a few RAM and SATA issues everything seems to be working fine, The audio (using HDMI) does not work. Have PC connected using HDMI for video (and I am hoping for audio too, this card is made for this and it has been tested with other OS) however the audio does not work, although in the audio preferences it shows to be using the correct hardware. Testing for sound under sound preferences does not play anything, acts as it it was, but no sound, no error messages either. I went ahead and installed ATIs proprietary drivers in hopes that it would make the audio work, but not luck so far.
View 6 Replies
View Related
Aug 16, 2011
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
View 4 Replies
View Related
Feb 21, 2010
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
View 4 Replies
View Related
May 6, 2014
I recently switched over one of my Ubuntu machines to Debian Wheezy. On the Ubuntu system I was able to get the HDMI audio working by adding radeon.audio=1 to grub. I've tried this on this system to no avail. The fglrx-legacy-driver causes underscan and I'd like to avoid it if possible for convenience.
Things I've tried:
fglrx-legacy-driver - Introduced underscan while not solving the problemradeon.audio=1 in grub boot line - No effectGoogling for several hours - There's a lot of topics about this, but most are old and irrelevant, and the ones that are current enough didn't solve my issue.Yelling at it - HDD light blinked a few times, no change
lspci shows
Code: Select allAudio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
View 14 Replies
View Related
Feb 9, 2011
So, I need to use the HDMI out on my Radeon 57xx because the DVI input on my monitor is in use by another machine that has no other way to connect to it, and I won't swap cables around all the time. Of course, because someone somewhere decided that if it's plugged in to HDMI it must be a TV and have overscan issues I have a nice black box surrounding my screen image.
In Windows I can resolve this by opening CCC and changing the overdrive settings. Thus far I have yet to be able to get CCC to open and the only thing the console tool allows you to do is toggle overscan on and off, which doesn't seem to have any effect so far. Has anyone gotten this issue resolved? Do I need to focus on getting CCC working (which I probably won't use for anything else...) or is there a console command that can handle the job? Change to xorg.conf? Anything?
View 1 Replies
View Related
Jun 26, 2010
Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
View 2 Replies
View Related
Jun 15, 2014
I am running a small Debian Jessie installation on my Zotac Nano AD10 (based on AMD's E-350, Radeon 6310). I use it as an MPD server, it outputs to my receiver over HDMI.
Up until kernel 3.11 that works fine. My GRUB command line looks like this (default grub.cfg file):
Code: Select all$ grep radeon /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet elevator=noop radeon.audio=1 radeon.dpm=1"
Up till 3.11, this worked fine. The available outputs in alsamixer are unmuted [00]. Aplay reports this:
Code: Select all$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I also set the HDMI output as system-wide default:
Code: Select all$ cat /etc/asound.conf
pcm.!default {
type plug
slave {
pcm "hw:0,3" # HDMI audio
}
}
Running speakertest on device 0,3 though, - no sound:
Code: Select all$ speaker-test --device plughw:0,3
speaker-test 1.0.27.2
Playback device is plughw:0,3
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
[Code] ...
I've tried fixing this repeatedly (3.12, 3.13, 3.14) but everytime i find myself returning to 3.11 because that keeps working.... Some posts suggest running xrandr could get it working, but this is a headless installation, so I cannot use xrandr.
For reference, OpenELEC works on this same system (separate install), and they're up to 3.14 as well. Never had a problem with OpenELEC and the audio not working.
View 1 Replies
View Related
Aug 16, 2010
I have an old Dell Optiplex GX240 running Windows XP hooked up to my Olevia HDTV. I'd like to format this computer and install Ubuntu 10.04.After burning the Ubuntu install disk, I hook the computer to the tv via HDMI and reboot to the CDROM but upon booting I receive an 'Invalid Format' error and no video is shown.I did some searching - there is very little info about this problem. This post http://ubuntuforums.org/showthread.php?t=1063217 seems to indicate that the solution is to hook up the computer to an old CRT monitor, then after the computer has booted, switch the HDMI cable to the tv.This solution is unsatisfactory. Does anyone have experience with this problem? Is there another way to get around this problem?
View 1 Replies
View Related
Dec 14, 2010
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
View 1 Replies
View Related
Dec 27, 2010
I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.
This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.
[Code]....
View 2 Replies
View Related
Jun 25, 2010
I've searched all over the internet and have found numerous threads on this topic, none of which have helped me fix the problem. I'll post as much info I can about my setup.I have 3 hard drives... one is for ubuntu (9.10), one is for my data, and one is for Windows7. It looks like this:
1st drive (hda) = ubuntu
2nd drive (hdb) = data
3rd drive (hdc) = windows
[code]....
View 6 Replies
View Related
May 16, 2010
I've been googling all afternoon to fix this error I get. The situation is as follows: I have multiple harddrives (3x320gb and 1x160gb) all on the SATA interface. One of these drives contains Windows, and the rest I use for programs and downloads. I've installed Ubuntu 9.04 from a USB-stick using the installer's partitioner to make some room for Ubuntu (Ext4 filesystem). I've tried Ubuntu and SUSE in the past.
View 1 Replies
View Related
Aug 4, 2010
Ubuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1
After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:
Error 13: Invalid or un supported executable format
I have tried to do the following:
url
This solved the problem for me, from > url
Quote:boot from the live medium and chroot into the Linux installation:
$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....
Then, the following command should resolve the issue. :
$ sudo grub-install --recheck /dev/sda
View 4 Replies
View Related
Jul 18, 2011
suddenly after upgrade
2.6.38-10-generic-pae ===> Error 16: Incosistent filesystem structure
2.6.38-10-generic-pae (recovery mode) ===> Error 13: Invalid or unsupported executable format
2.6.38-10-generic ===> Error 13: Invalid or unsupported executable format
[code]....
b08e48b7-1194-49c1-a743-91e7ee90334e is a link to /dev/dm-2 which is my root partition on nvidia raid
PS: At first it did not boot at all dropping out to grub shell, but I managed to boot it with gparted live usb stick and chroot to Ubuntu and re-install grub, but now 2.6.38-8 kernel works and 2.6.38-10 is not
View 1 Replies
View Related
Jul 22, 2010
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too
Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]....
View 7 Replies
View Related
Jun 22, 2011
With hello kernel module, i use two types of Makefile, one is using kernel build system:
obj-m += hello.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
module loads successfully; another is using (CC) and then creating the module by "make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules", this module gives the error message when it is inserted, .........
View 5 Replies
View Related
Apr 4, 2009
I have installed win xp(sda1) win 2003(sda2), centos 5 (sda7) and mint 5(sda5) on 4 partitions and swap (sda6).All OS work fine except centos 5. When from the boot menu I choose Centos 5, I get the following error:File system type is ext2fs, partition type 8x83.Kernel /boot/vmlinuz 2.6.18.92.el5xem root/dev/sda7Error 13 invalid or unsupprted excecutable formatBut I 'm sur that I have format /dev/sda7 as ext3
View 2 Replies
View Related
Jan 20, 2010
I've got a brand new Advantech USB 4761 Digital/Analog PC Lab card. They claim to run under Linux. The install, " dpkg -i advdaq_1.04.0006-1_i386.deb", was successful. But when I tried to modify and run their install script, "adv_load_template", I get this:./adv_load_templateinsmod: error inserting './modules/advdrv_core.ko': -1 Invalid module format insmod: error inserting './modules/usb4761.ko': -1 Invalid module format
View 1 Replies
View Related
Mar 4, 2011
I successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
[Code]...
View 2 Replies
View Related
Sep 7, 2010
I am trying to compile the Cisco vpnclient on my Opensuse 11.2 and (after some troubles) I got the module compiled and installed but when I try to load with insmod I got this error
<</etc/init.d/vpnclient_init start
Starting /opt/cisco-vpnclient/bin/vpnclient: insmod: error inserting '/lib/modules/2.6.31.12-0.2-default/CiscoVPN/cisco_ipsec.ko': -1 Invalid module format
Failed (insmod)>>
I am able to use the vpnclient forcing the module with modprobe -f cisco_ipsec but I'd prefer to solve the 'invalid format' original problem. I 'googled' around and it seems related with this warning during vpn_install script "WARNING: Symbol version dump /usr/src/linux-2.6.31.12-0.2/Module.symvers is missing; modules will have no dependencies and modversions." I have these rmps:........
View 2 Replies
View Related
Jul 22, 2010
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
code....
View 3 Replies
View Related
Apr 16, 2011
Reluctantly I made a temporary install of XP as follows Remove linux drive and install a wiped drive.format ntfs & install windows xp (w/sp3)shift ntfs drive to slave, replace linux drive as master and xp drive as slave. Add it to grub as follows:
Code:
# boot=/dev/sda1
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
titlem$ Windows XP
code....
View 1 Replies
View Related
Apr 18, 2010
I am using reliance zte modem ac2726.i inserted the modem in my laptop and tried wvdialconf command and it was working.but when i type
Code:
modprobe usbserial vendor=0x19d2 product=0xfffd
command it shows the following error message
Code:
FATAL: Error inserting usbserial (/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/drivers/usb/serial/usbserial.ko): Invalid module format
But "cat /proc/bus/usb/devices","lsusb","dmesg" everything are working perfectly."Wvdial.conf" file also got configured perfectly.what can i do now?
View 3 Replies
View Related
Jan 25, 2011
A little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same)
GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
View 8 Replies
View Related
Jul 29, 2010
i installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
[Code]....
View 2 Replies
View Related
Sep 27, 2010
I was installing opensuse on the c partition and it gave errors so i aborted it now i click on windows and it says invalid or unsupported executable format chainloader +1 so then i proceeded to try and fix this by changing the menu.lst to this:
And now it tells me that disk isnt found so i need to know what to put in the menu.lst to load the actual windows partition and then fix the original error.
View 9 Replies
View Related
