Ubuntu Multimedia :: Radeon X1200 HDMI Audio?
Apr 5, 2010
I want my computer to be used as a DVD/BD player, and as of recently it has rejected its windows install and refuses to reinstall. Ubuntu 9.10 installed without problem, but when I select the X1200 (hdmi) audio output via the top right icon no sound comes out. I've searched this topic and one theory was that if i ran ALSA mixer the x1200 audio might be muted by default; it was not muted. I've also been told to update my catalyst, but using synaptics packet manager to download the catalyst control center, when I run it I get the message no supported hardware found. Is there any way to get this to work, or am I stuck with my speakers/3.5mm jack?
View 1 Replies
ADVERTISEMENT
Feb 6, 2011
I am trying to install video drivers for the ATI radeon x1200 card on my laptop.
1. Download and install from AMD catalyst = fail. keep getting error 454 Bad Substitution.
2. Try "Additional Drivers" = nothing here.
3. Try "Synaptic Package Manager" search "fglrx" find one that looks right, let it install dependencies = fail. (maybe this is where I should be?)
4. Try this guide, however its a bit outdated. Get stuck on the repositories .deb files.
[Code]...
View 5 Replies
View Related
May 20, 2011
how to i get ubuntu to use my on board gfx card because it can't find it. games that run super fast in windows are bogged down(and proably rendering using the cpu) and it was enough for cube and cube 2.any command i can use to scan for the mobo card or is it called something totally different than a VGA
View 9 Replies
View Related
May 6, 2014
I recently switched over one of my Ubuntu machines to Debian Wheezy. On the Ubuntu system I was able to get the HDMI audio working by adding radeon.audio=1 to grub. I've tried this on this system to no avail. The fglrx-legacy-driver causes underscan and I'd like to avoid it if possible for convenience.
Things I've tried:
fglrx-legacy-driver - Introduced underscan while not solving the problemradeon.audio=1 in grub boot line - No effectGoogling for several hours - There's a lot of topics about this, but most are old and irrelevant, and the ones that are current enough didn't solve my issue.Yelling at it - HDD light blinked a few times, no change
lspci shows
Code: Select allAudio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
View 14 Replies
View Related
Jun 15, 2014
I am running a small Debian Jessie installation on my Zotac Nano AD10 (based on AMD's E-350, Radeon 6310). I use it as an MPD server, it outputs to my receiver over HDMI.
Up until kernel 3.11 that works fine. My GRUB command line looks like this (default grub.cfg file):
Code: Select all$ grep radeon /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet elevator=noop radeon.audio=1 radeon.dpm=1"
Up till 3.11, this worked fine. The available outputs in alsamixer are unmuted [00]. Aplay reports this:
Code: Select all$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I also set the HDMI output as system-wide default:
Code: Select all$ cat /etc/asound.conf
pcm.!default {
type plug
slave {
pcm "hw:0,3" # HDMI audio
}
}
Running speakertest on device 0,3 though, - no sound:
Code: Select all$ speaker-test --device plughw:0,3
speaker-test 1.0.27.2
Playback device is plughw:0,3
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
[Code] ...
I've tried fixing this repeatedly (3.12, 3.13, 3.14) but everytime i find myself returning to 3.11 because that keeps working.... Some posts suggest running xrandr could get it working, but this is a headless installation, so I cannot use xrandr.
For reference, OpenELEC works on this same system (separate install), and they're up to 3.14 as well. Never had a problem with OpenELEC and the audio not working.
View 1 Replies
View Related
Dec 14, 2010
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
View 1 Replies
View Related
Oct 13, 2010
My laptop currently is : [url]
Unfortunately I'm having trouble finding proper driver support for the ATI radeon x1200 as described by another poster:
You should still be able to get full 3D support for your hardware by downloading & installing the drivers manually.
This is where it gets complicated, unfortunately.
ATI dropped support for some "older" 3D devices some time back (actually not all that old in many cases - it made a lot of ATI card owners very upset). So I'm not sure which drivers you'd need to download & install to get your 3D hardware working.
The Radeon x1200 device in your notebook is, confusingly, not the same as a desktop Radeon x1200 card.
View 8 Replies
View Related
May 30, 2010
I have an Acer Aspire 5516 and have been running ubuntu for a while. I couldn't resist the upgrade notice to 10.04 so I did it. Unfortunately it doesn't seem to recognize my video card ATI Radeon X1200 and I have to boot in safe graphics mode. I can use my computer but the display is a bit off. I have tried to install the ATI driver but get the following:
ATI Technologies Linux Driver Installer/Packager
Error: ./default_policy.sh does not support version
default:v2: x86_64:lib32::none:2.6.31-14-generic; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.eqUOxU
View 3 Replies
View Related
Nov 8, 2010
how to install ati drivers for the ati radeon x1200 chipset? i searched everywhere but i could not find a link to a repository for this chipset
View 7 Replies
View Related
Aug 19, 2010
I have a Dell Optiplex GX280 with an ATI Radeon 3470 HDMI card. I'd like to install Ubuntu on this computer, and I'd like to use my Olevia HDTV as a monitor and use it as a media computer. I attach the tv to the computer via HDMI, and boot to the Ubuntu install disk - I'm presented with an 'Invalid Format' error message, and no video on the tv. Is there any way around this error so I can continue the install?
View 3 Replies
View Related
Dec 16, 2014
I have Debian WHeezy 7.7 KDE, card Radeon 5000 series. Card has HDMI, video on HDMI working, but sound not working. System see sound device, but if I select this and try to play music then no sound. I tried many things. Below is some lists.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
[Code] ....
View 1 Replies
View Related
Sep 9, 2010
I bought this Radeon 4670 [URL] to improve my video. Although the description on ATI-AMD webpage [URL] specifies that this card can output up to 7.1 audio through HDMI, Sound Controls only shows the stereo and off option. ATI Catalyst does not have any controls for audio. Is there a way to get 5.1 audio enabled? Using 10.04.
View 8 Replies
View Related
Jun 22, 2011
I recently installed ubuntu 10.10 on HTPC, after having a few RAM and SATA issues everything seems to be working fine, The audio (using HDMI) does not work. Have PC connected using HDMI for video (and I am hoping for audio too, this card is made for this and it has been tested with other OS) however the audio does not work, although in the audio preferences it shows to be using the correct hardware. Testing for sound under sound preferences does not play anything, acts as it it was, but no sound, no error messages either. I went ahead and installed ATIs proprietary drivers in hopes that it would make the audio work, but not luck so far.
View 6 Replies
View Related
May 12, 2011
I have been trying for a while now to get the audio over HDMI working from my PNY G210 graphics card and mythtv but with no luck.
I have followed this guide [URL]
prior to following this I only had my motherboards on board audio showing up but I am now at the stage that I can see the HDMI audio and select it and un mute it but still cannot get any sound out of it.
As a side effect after following the steps from the link above, now every time I boot the computer up my on board audio is muted so I need to un mute it from sound preferences.
This is my audio config as it stands:
scott@MythtvFrontend:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
[Code].....
The mother board is a an ASUS MN32-SLI deluxe and I have 2 graphics cards in it, a 9600GT to run the 2 monitors connected and a G210 which I would like to use to connect to my TV using the HDMI output. At the moment I am using the VGA output from the G210 to the TV and a separate audio out from the computer which was working fine but the audio is now always muted on startup.
I don't think it is an issue with my mythtv settings as I cannot get any audio over the HDMI using speaker-test (on board analogue audio works ok).
View 6 Replies
View Related
Jan 17, 2010
I'm able to get HDMI audio/video perfectly when I'm playing a dvd on mythbuntu. However, If I try to play the ripped version or any other video that is on the hard drive, I get no Audio?
I've checked alsamixer to make sure the device isn't muted.
If I use vlc media player I don't have any audio either. Is there a way to enable hdmi audio as default?
View 1 Replies
View Related
Mar 29, 2010
I have just build a HTPC with an Intel DH57JG Mini-ITX motherboard. The motherboard supports HDMI Audio but I just can't make it work.
View 8 Replies
View Related
Apr 21, 2010
I've been googling and searching these forums and I can't find a fix. I just discovered that I have a headphone jack on the bottom of my monitor and it would be a lot more convenient to use that rather than the jack on my tower. However, when I switch to HDMI audio output I don't hear anything. I now it's not my cable because it works on my HDTV and throughput audio fine.
I have Ubuntu 9.10 with the Asus M4A78T-E mobo with integrated ATI HD 3300 graphics. I am running the official drivers from ATI, ATI Catalyst 10.3 Proprietary Linux x86 Display Driver, the latest and greatest, not the one from Synaptic. I know this is a bad time to be looking for a fix since 10.4 is out in 8 days but if anyone knows a quick fix that would be great.
View 1 Replies
View Related
May 5, 2010
I currently installed ubuntu 10.04 and I am having trouble getting sound from my monitor. The monitor that I have is a HANNS-G HH251. It is connected to a Sapphire 4850 Video card through a HDMI wire. The monitor has audio when I boot it in windows7, but there is no audio when I use ubuntu 10.04.
View 5 Replies
View Related
May 13, 2010
I am running 10.04 with an integrated Radeon HD3200 card. When I set up the tv through hdmi, the sound works perfectly; however, when I switch to analog audio to play something else, the next time I try to use hdmi audio I get nothing. It shows to have good level through Pulse Audio Volume Control - shows like there is a sound coming through it, but I get no audio through the tv. The only way I can fix this is by uninstalling proprietary drivers and reverting back to generic configuration and then reinstalling proprietary drivers. I have to revert back to generic in order to get the sound working again.
View 1 Replies
View Related
Nov 12, 2010
I have a dell 1525 laptop with ubuntu 10.10 . Just made the switch from win vista . Everything seems to be perfect, wireless, video, ect. However no audio on my onboard hdmi port. The video is displayed perfect runs very smooth. This could be my lack of knowledge on ubuntu just not understanding what settings to change maybe no driver for the hdmi audio. I would like to add that the laptop onboard speakers work fine.
View 5 Replies
View Related
Dec 3, 2010
I have an ECS A785GM-M and the integrated HD4200 HDMI audio was working out of the box on a clean Ubuntu 10.04 install. After the updates and all, everything still worked just fine for a month.
Then, I installed a HD4870 with ATI DVI to HDMI adapter and the sound is not working (it works flawlessly on Windows 7, so it is not the hardware). The creepy stuff is that on Pulseaudio GUI configuration, everything looks right: ATI 48x0 HDMI is selected as output and when some sound is playing the bar moves, although there is no sound coming from the TV speakers.
I tried editing /etc/pulse/default.pa as suggested on this link, but it didn't helped. I'm kind lost here, since it looks that there is nothing wrong and yet, it is not working.
View 1 Replies
View Related
Mar 12, 2011
Because of some kind of mismatch between the latest X-server and nvidia drivers which crashes recent versions of the xserver, I've downgraded with a clean install of mythbuntu 10.04.
Trouble is, now I'm getting no sound through the hdmi to the tv. When I try aplay -l I get info for sound card 0 (HDA Intel), but nothing is showing for soundcard 1e So it's not seeing the card, so I can't configure it.
View 1 Replies
View Related
May 2, 2011
I have recently installed Ubuntu 11.04 64bit. After normal install process, it invited me to install ATI proprietary drivers (because I have an ATI Radeon HD4850 video card). Everything seems to work out of the box, except the HDMI sound. The HDMI video works OK, and also the normal sound using the onboard soundcard work OK. By my knowledge I think I have setup the audio properties correctly. Some screen-shots attached. What happens when I switch the output to HDMI is no audio signal on the TV. The HDMI works OK (both sound and video) on my Win7 64 bit install.
View 4 Replies
View Related
May 11, 2011
I have a G62 HP laptop with Ubuntu 10.04 on it. I have updated alsa and everything else I can think of. When I have an HDMI coard plugged in, sound only comes out of the computer (I use VLC).
View 1 Replies
View Related
Mar 19, 2010
I was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
View 6 Replies
View Related
May 16, 2010
I am currently running Intel DG45fc Mobo. works great with Ubuntu thus far. However when connecting to my LCD through HDMI I can not receive any sound.
View 3 Replies
View Related
May 22, 2010
I'm trying to set up a new HTPC and can't get sound to work over HDMI. If I set System > Preferences > Sound > Hardware and set the profile to Analog Stereo Duplex, I get sound from the speaker port just fine.However if I set the profile to Digital Stereo (HDMI) Output I get nothing on my TV. I'm using 10.04 LTS.Some data:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
View 2 Replies
View Related
Jul 5, 2010
Ok, so let me first start off by saying I'm a linux noob. I feel no shame. I've been working on trying to solve my issue for a few days now and after much research I am still no better off. But I am able to at least narrow down my problem. The long and short of it is that my HDMI audio device is not showing up in Ubuntu 10.4 x64 edition. Let me give a few specs.
Motherboard: ASROCK 785GMH/128
Onboard video: ATI Radeon HD 4200
Onboard audio: VIA VT1708S
OS: Ubuntu 10.4 x64
Alsa drivers: alsa-driver-1.0.23
ATI Drivers: ATI Catalyst 10.6
Running the latest version of ALSA and ATI's proprietary linux drivers. I can see all outputs (including the s/pdif) except the HDMI. From my reading there should be a device listed on a 2nd card called ATI HDA HDMI aplay -l returns the following result:
[Code]...
View 1 Replies
View Related
Jul 26, 2010
I installed Ubuntu 10.04 a few days ago and HDMI audio worked out of the box (with the nVidia drivers enabled). Today I did a system update and (among other problems) there is no more sound coming over HDMI. I'm not really sure what to do to diagnose this problem... where would I start?
View 7 Replies
View Related
Oct 21, 2010
im trying to get my xbmc box running on an asus ion mobo. in gnome i set all audio output to the hdmi driver but im not getting any sound on the tv. Im a newbie by the way so it's problably some silly thing.. but i've included a link to my alsa information and pulseaudio settings in case it's a big thing.URL...
View 4 Replies
View Related
