I'm searching for a good media player on my ubuntu 10.04 32bits desktop. I like rhythmbox but i hate those ugly and annoying columns. Is there any way to remove them ?
View 1 Replieshow to change it? it doesn't change when I change the icon set
View 2 Replies View RelatedI've been trying to get Rhythmbox to play with my DAAP enabled HPMediaVault server, and have several entries now under "Shared" in RB -
I've looked everywhere, Googled, and looked in Ubuntu forums to no avail.
Am I just overlooking something simple?
I want to remove the non-working entries that I put in the "Shared" list.
I was wondering if there is some ind of way of removing the rhythmbox link in the volume menu in the indicator applet..It's just that I hardly use it and it's pretty annoying and redundant as well having it there. I don't want to get rid of the volume menu completely nor of rhythmbox. I just want the link gone from there. Actually it never was there until I decided to open it once. After that day, it wouldn't go, no matter how I would exit the program. I didn't have this problem in 10.04. It's just in 10.10.
View 3 Replies View RelatedI want to install "mad"(gstreamer mm3 plugin), it comes in gst-plugin-ugly but when i do ./configure it show mad in list of plugins that will not be build I also intalled libmad.
how can i build mad in gst-plugin-ugly
Is it possible to split a bash terminal window in to two colums so you can run and see multiple commands at once instead of having to flick between?
View 4 Replies View RelatedWhenever I plug my Zune in, Rhythmbox recognizes all the songs on it but when I doubleclick on a song to play it, the song doesn't play and Rhythmbox quits. Any suggestions on how to fix it? I'm running a Dell XPS 410 with 4GB RAM and a 1.75 GHz processor.Also, I imported a CD and it plays fine.
View 1 Replies View RelatedI use XFCE on Debian (squeeze) and I'm sick and tired of the ugly fonts in all Qt-apps. See below what it looks like in qtconfig-qt4 with a deleted ~/.config/Trolltech.conf. I've done some googling, but without any satisfaction. I've tried to change font (Font family drop down menu in pic), and some fonts looks as bad as the default (Sans Serif), and some look ok. Something seems to be fscked up.
View 7 Replies View RelatedWhen I install themes from xfce-look.org they are ugly and don't look how they should. Am I missing a package?
View 1 Replies View RelatedFor a reason I cannot remember, some months ago I installed Rhythmbox 10.0.6 as an upgrade to the standard version in Karmic ( I think it was in an attempt to get Ipod working).Now that I have upgraded to Ubuntu 10.0.4 LTS with Rhythmbox 10.0.8 installed, I have a problem that when I try to start Rhythmbox, the old (unwanted) version starts, even though I have checked and the later version is installed.I am unable to find a way to remove 10.0.6 as in the terminal when I use commandremove --purge rhythmbox-0.12.6the message I get is "Couldn't find package rhythmbox-0.12.6" but I know it's there as the folder is in filesystem/usr/local/src/rhythmbox-0.12.6Can anybody suggest a way I can remove this old, unwanted version soI can use the new version with all its lovely benefits?
View 1 Replies View RelatedI was wondering if there was a way to change the ugly xscreensaver unlock dialog.
View 1 Replies View RelatedI started using Banshee. Having Rhythmbox always in the sound menu is redundant. Is it possible to remove it from there? I would like to keep the applet, not the Rhythbox launcher/controller.
View 9 Replies View RelatedI own a Sony NWZ-E345 MP3 player that used to be seen by Rhythmbox when running 9.10 with no issues. After enabling the plugin for MTP within Rhythmbox the player was seen at connection. However, after updating to 10.04 my MP3 player is not seen at all, even though MTP support is enabled under plugins. As a matter of fact none of the media players I installed can see my player and they all support MTP. I tried some other players as a troubleshooting step. I have confirmed that libmtp8 is installed via the repository. Has anyone encountered this as well? I suspect this may be an easy reply for someone. BTW, this occurs with two different machines and nothing has changed with my MP3 player.
View 1 Replies View RelatedIf i close rhythmbox using the close tab on the window it closes to a daemon on the application bar.This is both fine and handy but i have a problem in that even when i left-click the daemon and hit 'quit', Rythmbox closes and then appears again a few seconds later. The same happens if i 'killall Rrhythmbox' in the terminal.I can also see, in conky, that Rhythmbox is running as a process when it re-opens and i can effectively 'show Rythmbox from the daemon - so its not just a daemon problem.Can someone either tell me how to permanently quit a running instance of Rhythmbox or tell me what setting i have enabled that keeps Rhtymbox opening?
View 3 Replies View RelatedI was looking around for a way to control rhythmbox playback on a remote computer with ssh (or telnet) and found a few archived posts asking about this without a working answer.After a little searching I found a way to do this on commandelineful.
View 3 Replies View RelatedI have just installed Rhythmbox via Synaptic..All is fine, however, I noticed that it's showing release version 0.12.8. After checking out [url] I noticed there is a newer stable version available. I have downloaded the tar.gz file, and followed the instructions in the INSTALL file.
The first step is to, in terminal, run ./configure before attempting to MAKE/MAKE INSTALL (won't let me do it anyways)..I run .configure, and at the end, I get this error:
Code:
This is preventing me from moving on during the installation.
I have tried
Code:
And it cannot be found.I have search Synaptic for GTK+-2.0 (for starters) and nothing specific shows up..A LOT shows up, but I'm not sure if there is one specific item I should be downloading?
I upgraded to 10.4 (64bit) Ubuntu and since then have been unable to rip CD's using the procedure in the Official DocumentationUbuntu Documentation > Ubuntu 10.04 > Music, Video and Photos > Music > Extract from a CD.But when a CD is placed in the drive Rhythmbox would not run.Typing rhythmbox in a terminal (with a CD) in the drive shows the message segmentation fault.
I found in the documentation that sound-juicer was used in the ripping process and as this was not installed - so I installed this.I can now rip a CD using sound-juicer and can run rhythmbox when there is no cd in the computer but I am a little puzzled as to what is happening.
I would very much like to add FEAR.FM [URL]to the Rhythmbox radio-player. I cannot find a direct link on the website and tried some others but none of them worked.
View 3 Replies View RelatedRhythmbox not starting Ubuntu 10.10.
It was installed several times{uninstalled then reinstalled}
It just will not start.
Just did a new install of 10.04, can't get Rhythmbox to login into Last FM, keeps saying my user name and password are wrong. They are not. How do I get it to connect with Last FM, I have a new acct and password and just paid $3.00 for a months subcription. Had no problem with Ubuntu 9.04
View 1 Replies View RelatedI enjoy the features of rhythmbox, but whenever I load rhythmbox it eats up my HDD for about 7 minutes. Is there anyway to make it stop? I have 130gb of music and have already unselected the "monitor folders" box.
View 9 Replies View RelatedI like Rhythmbox more than any other music player for the simple reason that it has "Genre, Artist, Album" browsing available and doesn't shove the concept of playlists in my face, when I don't care about playlists 99% of the time. So I want to keep using it.
But lately (some months ago) after trying an upgrade to 10.10, and switching back to 10.04 (unsolvable network issues), Rhythmbox has recognized that its database has been touched by a newer version, and refuses to start.
So I took the next natural step: ~$ find . -name '*rhythmbox*'. Which led me to find ~/.gconf/apps/rhythmbox, which I promptly moved to ~/.gconf/apps/rhythmbox.bak. Lo and behold, Rhythmbox decided to start on the next try. But then, after a new start, something mysterious (to me) happens, and Rhythmbox decides it can't start again. So now I'm up to something like ~/.gconf/rhythmbox.bak12 (my philosophy: why throw away any data when you are still at 10% drive usage?), and I'm hoping that there is a guru out there who can say something along the lines of, "oh yeah, just delete ~/.secretstuff/rhythmbox-please-behave-badly, and that'll take care of it".
I have a lot of CDs and I've been uploading them onto the computer via RhythmBox to be played on RhythmBox. At first, it would get all the song titles and the artist name and the album name and all that stuff. I stopped uploading music for a week or two and started again, but now it's stopped doing getting the info, and I have to enter everything manually, and I've been doing that, but it takes a while.
What's the problem and how to I fix it? It seems it might've been related to Musicbrainz, which apparently gets album data. Did that site stop working, or did I have some free trial which ran out?Did I just happen to upload CDs with the data built in at first, and now am uploading Cs that don't have that? Not even sure it works like that.
I am trying to organize some music I just copied off cd to my hard drive. the tracks are not listed (there is no track listing or album title etc) so I go to music-properties and try to fill the stuff in. I can't type into the boxes.
View 5 Replies View RelatedI was using Rhythmbox successfully yesterday. This morning the automatic updates said I should install some new packages, one of which was, I think, rhythmbox. Now it tells me that "The autoaudiosink element is missing" whenever I try to play something. What do I need to do in order for rhythmbox to work again?Other audio programs, e.g. Audacity, work fine.
View 3 Replies View RelatedUbuntu 9.10
Rhythmbox 0.12.5
How does a person determine the URL of the audio stream for a Live365 broadcast in order to create a new radio station entry in Rhythmbox? I would like to be able to access and listen to the audio stream completely from within Rhythmbox.
I am using Rythmbox for Ubuntu 9.10. I want to alter the tag info for certain songs because it is incorrect. but when I open the properties window to do so, it won't let me type in the field......I can highlight the text, but not change it
View 2 Replies View RelatedWhenever I open Rhythmbox, it looks like it is about to work, but crashes. I get this when I run it from the command line.
Code:
** (rhythmbox:3002): CRITICAL **: atk_object_set_name: assertion `name != NULL' failed
[code]....
I found out that this was just a problem of having a certain album ripped, so this does not happen any more.
Rhythmbox went missing. How long ago I'm not sure as I don't use often. When starting I get them error:
Code:
$ rhythmbox
rhythmbox: error while loading shared libraries: libtotem-plparser.so.10: cannot open shared object file: No such file or directory I uninstalled and reinstalled Rhythmbox, but that didn't help.
I've recently installed 10.04 and everything is fine except Rhythmbox.It merely won't add to media library any music file on smb shares I'm using Ubuntu almost all the time and deadly won't to be able to listen to my music on the server
View 6 Replies View Related