Ubuntu :: Moving HDD To New Computer?
Feb 3, 2010
I've currently got an older Gateway 1.8Ghz/512MB older NVIDIA box running Ubuntu 9.10. I'm I'm putting my HDD into another one I acquired, P4 2.2Ghz/2GB/Newer NVIDIA card. Basically the HDD will be the only leftover from the old system (and maybe a cdrom) Will 9.10 re-detect everything ok? Or will things I'm not thinking about be configured wrong due to the switch. Also I should state the the Proc on the new mobo will be replaced with a P4 3.4Ghz within the next couple weeks. But I was thinking since I'm not going to 64bit it wouldn't make a difference, correct me if I'm wrong. my /home is on it's own part so a reinstall wouldn't be too big of a deal if needed, just don't want to do unnecessary work.
View 2 Replies
ADVERTISEMENT
Jun 28, 2011
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies
View Related
Oct 3, 2010
today I obtained a computer from a friend who had just bought a new computer, and they were getting rid of the old one. Being a linux user I couldn't let a perfectly good albeit slow Windows XP computer go to waste. With Ubuntu 10.04 install it is lightning fast. I've noticed it is faster than the current computer I use as a server, and want to migrate the HDD over to the new machine. I know there are issues when doing so with Windows as it registers the hardware and has major heartburn with this, so I was wondering if Ubuntu or linux in general will have any problems. I simply want to move it over.
I don't have a problem with reformatting as it has it's own /home partition, but for obvious reasons I would like to minimize down time. I did a search on google and on the forums here and I didn't find what I want to do.
View 3 Replies
View Related
Jan 10, 2010
I have a bunch of gconf settings that I change by default when I install Ubuntu on someone's machine and thus I've created a script to make it easier after a fresh installation. Here is a list of changes I make so far:
[Code]....
However, I'm looking to remove the top panel and have only the bottom panel like I have set up on my machine. The gconf settings seem to be pretty complex and I'm not sure which keys I should be changing to remove the top panel and include the settings I have currently for the bottom panel (e.g. Menu Bar | Shortcuts | Window List | Notification Area | Clock)
View 1 Replies
View Related
Apr 18, 2011
I'm running Ubuntu 10.10 on a partitioned dell laptop which I plan to replace soon. Then I hope to install Ubuntu in a partition, same as at present. What is the best way to transfer my software and files to the new machine? I can follow simple command line instructions but am a GUI slave at heart.
View 11 Replies
View Related
Oct 28, 2009
I have Fedora running on my computer at school and have been informed we are getting new computers.
Can I simply move my hard drive to the new computers? I don't have to reinstall do I? Would I have to use a new kernel?
View 14 Replies
View Related
Feb 12, 2011
My old workhorse computer's motherboard died yesterday, and I want to get everything off of its RAID1 array. I have a backup on an external drive but it's a few weeks old and I'd like to make sure I've got everything.
The old machine ran Slackware 12.1, and had a 2-drive IDE 250GB RAID1 array with partitions:
md0 - swap
md1 - /
The new machine has Slackware 13.1, and also has a 2-drive SATA 250GB RAID1 array with partitions:
md0 - /
md1 - swap
md2 - /home
I put the IDE drives from the old computer into the new one. I'm not sure how to get the old array going now. I'm not sure if I should use mdadm with --assemble (since the array was already set up before) or with --create (because the array needs to be renamed so it doesn't clash with the new computer's md1). I'm thinking I should use --create and give the old md1 a new name (md3). But I'm not sure if anything bad will happen if I use --create on an array with data on it.
Output of mdadm -Esv:
Code:
ARRAY /dev/md0 level=raid1 num-devices=2 UUID=9a0cc71f:df5e59d9:50e7b281:3adcc49f
devices=/dev/sda1,/dev/sdb1
ARRAY /dev/md1 level=raid1 num-devices=2 UUID=698c321a:8008c659:d8c7deeb:c1dd303c
[code]....
The old drives are the last two entries, sdc and sdd. It's odd that the order is reversed. I had (non-RAID) Windows partitions on both drives and I've mounted them and verified that the drives are on the IDE cable in the right order, and sdc is the original 1st drive of the array, and sdd is the 2nd drive of the array.
View 1 Replies
View Related
Mar 27, 2011
I like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
View 2 Replies
View Related
Sep 13, 2009
I have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
View 2 Replies
View Related
Mar 4, 2010
I have limited experience in terminal, but let me first explain what I am trying to do to see if there is some easier way to do it. Basically I want to change the skin in aMSN. I downloaded the new skin but am unable to unzip or move it without /root permissions. I don't know how to acquire this without being in terminal. So I figured there had to be some way to go into the terminal and use it to move the unzipped folder from the desktop to the aMSN skins folder.
View 3 Replies
View Related
May 28, 2011
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
View 2 Replies
View Related
Jan 9, 2010
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
View 1 Replies
View Related
Jun 30, 2010
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
View 8 Replies
View Related
Aug 18, 2010
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies
View Related
Jul 9, 2011
I've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
View 2 Replies
View Related
Jan 30, 2010
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
View 3 Replies
View Related
Aug 29, 2010
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
View 4 Replies
View Related
Nov 11, 2010
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies
View Related
Sep 10, 2010
I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
View 9 Replies
View Related
Sep 21, 2010
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies
View Related
Mar 17, 2011
I am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
View 1 Replies
View Related
Jan 5, 2010
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies
View Related
Jun 17, 2011
I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
View 1 Replies
View Related
Feb 9, 2011
I ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.
View 1 Replies
View Related
Apr 17, 2009
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
View 3 Replies
View Related
Jun 20, 2011
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
View 3 Replies
View Related
Jun 7, 2010
i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies
View Related
Feb 25, 2011
I need redirect serial port from ONE computer to ANOTHER computer, and at the another send this port to VirtualBox with WindowsXP.VB needed because i need to use software for windoze I do this:NE computer:socat tcp-l:54321,reuseaddr,fork file:/dev/ttyS0,nonblock,waitlock=/var/run/tty0.lock
ANOTHER computer:
socat pty,link=/tmp/ttyS0,waitslave tcp:ONE:54321
Now (at ANOTHER) i've set serial port in VirtualBox as
[code]...
View 2 Replies
View Related
Jan 1, 2010
I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies
View Related
Jan 6, 2011
I want to move a 250GB IDE hard drive from a PC and repalce it with a smaller 40GB IDE HD. Currently the 250 GB drive is dual loaded with WinXP and Ubuntu desktop.
This PC is a kiosk style touch screen that I use as a home stereo and some other entertainment and household tasks. I have some hardware (touch screen, USB headset, wireless LAN card, sound card) that are proving to be problematic under Ubuntu. Currently this box is very usable under windows and I would like to just continue using the current build but with the new smaller HD.
I want to move that 250GB drive (along with several others) to a cluster and make a shared network space for file storage, music streaming, etc. but that's a project for another day.
View 9 Replies
View Related
