Ubuntu :: Monitor After Upgrade To Natty - Wrong Setting?
May 9, 2011
After upgrading to 11.04, I've been experiencing this weird issue with my monitor. Every time I reboot or turn the monitor on, the colors in Ubuntu are all wrong -- really green. If I go into my monitor's control panel and go to the "Input Color Format" setting and switch it from YPbPr to RGB things go back to normal.The problem is that I can't seem to save this setting. Every time the monitor is turned off it goes back to the wrong setting. I never had this issue before so it makes me think it may have something to do with the upgrade to Natty. The monitor is a Dell SP2208WFP and it's connected to my computer through an HDMI port. I use the Intel video driver.
I'm having problems setting the primary display in my Linux environment. I tried following the instructions here which seems to be working for everyone but it didn't work for me. In my /etc/gnome-settings-daemon/xrandr folder, I edited the monitors.xml file as well. It looks like this:
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10. On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I have a wireless network (192.168.1.0) that's bridged to the Internet and a wired one (192.168.0.0) that's only local. When I am connected to both networks, Natty wants to route my Internet traffic through the wired, local-only one.
Can I make it automatically "just work", so that the right network is chosen for Internet traffic? Otherwise, what's the workaround?
Sometimes, randomly, when turning on my Ubuntu laptop (HP 6730b, Ubuntu 10.04) I get a wrong monitor setting (much lower resolution than normal) and it is not possible to set it correctly because the menu buttons are wrongly placed and some are not present (probably there is not enough room for them) I have no other way than to restart the system to get the right resolution. Can someone tell me this inexplicable (to me) behaviour? Of course I didn't change anything in monitor settings...
I have conky running a simple script on my Ubuntu 11.04 install. Running conky from using ALT-F2 is fine, but I have have conky added to the startup list, and when it runs from this, the conky window is different (ie not integrated with desktop layer). It has some shadowing around the edge and it seems to be on a layer other than the desktop. In addition to this, it stops running after a short while. I then run conky from ALT-F2 again and it's appears as I want, and stays there all day. I have included what I think is the relevant code below from my conkyrc. Has anyone had similar issues with a suitable way to resolve the problem?
After i have reconfigured my X setup in Slackware 13.0 i have wrong keyboard settings. I get the standard us keyboard instead of german layout. I checked /var/log/Xorg.0.log and found this:
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse1 (WW) Disabling Keyboard1
I've been working my butt off all day now trying to get the nvidia drivers installed and then (the hard part) get dual screen to work properly with them installed. Finally I've gotten to the point where both of my screens are working perfect but now the login screen is on the second monitor instead of the first monitor for some reason I do not know.
Here's my xorg.conf:
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009 Section "ServerLayout" Identifier "Default Layout"
I've got a dual monitor setup. The primary one is 1360*768 and the other is 1024*768. When I fullscreen a video on the web [URL] it fullscreens to the smaller (non-primary) monitor, but cuts some off the right hand side, as if it is fullscreening the right size to display on the bigger monitor, but instead does it on the smaller one. It happens with any web video, if I click the fullscreen button on the player, it moves it fullscreen to the other monitor.
one of them is a TV with an HDMI input. The login screen shows up on the tv, so if someone is watching a movie, I have to pause it to switch inputs and login. Other than that, everything is fine. How do I get the login screen to show up on the main monitor?
Why on ubuntu 11.04 with unity and dual monitor de notification area is in the wrong monitor and the Bluetooth, sound... buttons are on both? How could I change this?
I have 2 monitor on and Nvidia FX5200 set up as twinview
Monitor 1 is an old Sony CRT @ 1280x1024 Monitor 2 is a Visio HDTV @1920x1080
I have setup Monitor 1 to be the primary using nvidia-settings but the GDM login keeps sowing up in the second monitor ; before the HDTV I had a CRT TV @ 1024x768 and all was good. My theory is that GDM determines the center of the Screen (both monitors together) and then centers on that monitor. If this is true then how may I override this behavior and force the GDM login to show on my primary monitor?
(prior to this i had 8.10 and sound) added a lot of things through command lines,etc...and accidentally stumbled on the fact that the wrong device was chosen in the sound preferences... can someone explain to me what the settings should be? i have just done a clean install of lucid lynx 32 bit i386, no dual boot, just plain clean and fresh lucid lynx. under the output tab- this is where i have a choice between: Internal Audio (analog stereo duplex) USB Audio i know the usb is my speakers now...but what is that analog thing?
under the hardware tab- the internal audio can be analog stereo duplex or analog stereo output, analog stereo input, off, or analog surround with various levels of output from 4.1 to 7.1 the usb audio has only two choices: analog stereo output or digitla stereo duplex under the input tab- internal audio analog stereo is the only device listed choice of connector: microphone 1, mic 2, line in
at the moment i dont have my headphones plugged in, dont want to complicate things. but i am hoping to get skype working and be able to leave the speakers in and when i plug in headphones they will must the speakers automatically. if it doesnt work like that i wont die...but i would like to no have to disconnect the speakers just to use headphones, which is what people i know say they have to do.
I'm trying to upgrade my sister to natty, but it wont boot properly unless I use nomodeset. It didn't need this in maverick, and she doesn't need any proprietary drivers, as she only has onboard laptop graphics (intel mobile 4 series I think..) So when I boot it into the LiveCD the resolution is wrong, so I go into system > preferences > monitors but it wont let me change the resolution as the monitor is listed as "Unknown" I also tried LinuxMint 11 (Katya) but it was the same (it is based on ubuntu anyways so it's not surprising.)
I use 2 monitors under Ubuntu 9.10, but I have them set up in a unique way. The primary (CRT) faces me on my desk, but the other (widescreen LCD) is turned away from me, because I use it only to watch movies from my couch. My video card is an Nvidia GeForce 9800 GTX+, using the proprietary Nvidia driver package, with Xinerama turned on, so the desktop extends across both displays. Given that setup, is there any way to control which display applications open upon? Several apps have started opening on one display or the other, seemingly at random. Further, some apps start on the primary display, but open their subwindows on the secondary display. It's very annoying, because I can't see the second screen, so I can't drag the windows back to the primary desktop.
I would also like to have VLC Media Player (or any other app) always open on the secondary screen, on purpose. I almost never watch movies sitting at my desk, but rather from the couch. I placed a VLC launcher icon on the secondary screen, but when started it opens on the primary display. (If you're wondering how I can click on anything from my couch, I have a wireless mouse there in addition to the wired mouse at my desk. It's my "remote" since I don't have a TV. Xorg will quite happily support 2 or more mice simultaneously, I discovered.)
I have a laptop connected via HDMI port to different external displays throughout the day. I have configured the displays (Settings > Displays) to turn off the laptop display and set the external display as primary. However, this setting only takes effect after login. Thus, I am unable to see the login screen greeter on my external display because I close the laptop lid, so I am logging in blindly to a gray login screen background.
he issue I am facing is that when I start the laptop with an external display connected, the greeter only appears on the laptop display. The gray login screen background image spans both laptop and external displays and my mouse pointer appears on both displays, so I know both displays are detected and configured as dual displays. But, I am guessing, the laptop display is set as primary while the external as secondary.
I would like to know if there is a way to dynamically switch the greeter between the two displays, regardless of which one is set as primary and secondary. Or, is there a way to configure the system such that if there is an external display connected via HDMI, then it is set as primary, and if no external display is connected, then the laptop display is set as primary?
I have searched all over the net and this forum to no avail. I read a post which required copying the user's ~/.config/monitors.xml file over to /var/lib/gdm/.config/ but this caused my laptop monitor to be turned off at login even when there was no external display connected.
Hardware: Acer Aspire 8730G, Core 2 Duo T9900, 8GB RAM, Nvidia Geforce 9600M GT. Software: Debian 8.4 Jessie, Gnome 3.14.1, Gallium 0.4 on NV96 (I am assuming this is the Nouveau driver)
Contents of the /etc/X11/xorg.conf file which I generated with the command "Xorg -configure" as root in console mode:
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
I'm currently running an up-to-date copy of Ubuntu 11.04, but I'm noticing some strange behavior with the monitor settings. First of all, I started investigating this because I'm seeing a lot of screen tearing while watching videos full screen as well as while the screensaver (lattice) is running. On Ubuntu 10.10 I was able to simply set the refresh rate of my monitor to 60Hz through the Nvidia tool and everything worked great. Now, this is no longer the case. I'm using a Samsung Syncmaster 205BW monitor with an Nvidia 8600 GT video card. They are connected with a DVI cable.The strange thing is, the default tool, Monitors, claims my monitor is "unknown" and will only allow me to select 50Hz, 51Hz, and sometimes 52Hz for the refresh rate.
The Nvidia tool claims that my monitor has been detected as a Samsung Syncmaster and is configured to run at 60Hz.However, another area of the Nvidia tool claims that my monitor is using a refresh rate of 59.95Hz. none of these solutions had any effect. I'm still seeing video tearing. I let the Nvidia tool re-write my xorg.conf file after trying these solutions.
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
I am using Mandriva 2010.1 and KDE4. The primary monitor is VGA-0, and sometimes it's desired to play a video on the big monitor which is HDMI-0. I use an xrandr command line which works nicely except that the KDE4 task bar and desktop icons move over to HDMI-0. How can I keep the task bar and desktop icons on VGA-0 when both monitors are enabled?
Code: xrandr --output VGA-0 --mode 1024x768 --rotate normal --pos 0x0 --output HDMI-0 --mode 1920x1080 --rotate normal --right-of VGA-0 --pos 1024x0
I upgraded Netbook edition from Lucid to Maverick, and it's gone horribly wrong. It may be because I had set up the a Gnome session in Lucid so that I could add and remove applets to panel in while still having the netbook session layout.
After distro upgrade I ended up with a hybrid system with both the unity launcher AND the Lucid-style UNE launcher. Unity does not recognise any of my installed software, e.g open office or bibus in "Office". UNE launcher does. There is also no option of Gnome session at login, only Desktop and Netbook!
I'm on Natty since yesterday but I started the day before. My first impression was great. I now had an option top upgrade from 10.10 and not loose my data! So I did. It all went fine until the point where The Upgrade tries to restore my applications. It failed and returned the message: unbalanced group option, expect badness.
And that was it! And I would have been waiting a very long time if I wasn't looking the details of what's going on because from here and after a 3rd try, I went to sleep online to find out I was still expecting badness the next day. I did a hard reboot and tried login in. I reached the login screen with success but could never login. I was using the encryption options which it seems comes after the restoration of application.
The symptoms are those of a wrong password. I finally did a clean install and restored my data from my backups (wouldn't try something new without a backup). Otherwise, I like Unity. I see a few things that needs polishing here and there but I don't mind using it. I think that voices from people liking it need to be heard as well because they usually don't have a reason to complain and it then looks like every body think Unity is not good.
My monitor is in the process of making the jump to the after life. This means I will have to get a new one soon. Since it will be a larger one in size and resolution I need to set it up accordingly. What do I need to do to setup my new monitor, whatever type it will be?
Some details:
I run Jaunty 64-bit I have an nVidia 8500GT card with driver version 195.30 Now I use a resolution of 1280 x 1024 (5:4) My xorg.conf file looks like this:
Basically, About 50% of the time, the system boots and sets the console resolution to something strange, and the console renders in a small box in the top-left hand corner of my screen. This causes problems not only with the display of the console, but with the display of X as well.
I have an Intel GL40 chipset on this laptop, with an integrated GMA4500 GPU. I am using the latest stable Intel video drivers (2.10.0-1), and have tried using the git drivers. In addition, the problem has been occuring since December, when I install Arch linux on this machine, I have just now had the time to address it. So basically, the issue has persisted with all driver versions since mid-December to the latest releases.
In addition, I have tried using several kernels, including:
But the problem persists with each.
I wish I could give you relevant diagnostic information for this issue, but if I had any idea where to start...
I will gladly post any information necessary. I was going to post a copy of everything.log for a successful and unsuccesful boot, but unfortunately they put me over the posing limit by about 100,000 characters each.
I guess, on second thought, that my Intel video driver really wouldn't have anything to do with my console, now would they?
Since upgrading my former Karmic/Lucid/Maverick laptop to the Natty beta recently, I've been unable to change anything about my desktop background. Each time I reboot, the background is a different solid color, but I can't change the color nor set a wallpaper image. Here's what I've tried;
obviously natty is flawed. I upgraded as an option in ubuntu studio's update manager. not sure if studio was ment to be upgraded to natty but it was in the manager, as studio is still 10.10 maverick. regardless the results have been disastrous. i am running into problem after problem as apparently many users are.
i had recently done a fresh install of ubuntu studio maverick which seemed perfect. as i was still setting up and restoring until i noticed the option for natty. so while i'm still at it i think i'm going to reinstall 10.10 this is the first imperfect ubuntu upgrade i've experienced but linux still rules.
