I installed Lubuntu, and when I boot up, Lubuntu isn't in my dual-boot options. It may have to do with the fact that I had to manually mess with the partitions in the installer. I am using XP.
View 3 RepliesAfter the last Lubuntu update Windows XP disappeared from the grub and it doesn't appear on the OS list. Is there any way I can fix or restore the grub to display XP again? I ran TestDisk and the XP partition is there undamaged, it also appears in the file system and I can access the files in Lubuntu; it's just not appearing in the grub anymore.
View 9 Replies View RelatedI just installed a dual boot win7-Ubuntu 11.04. When I reboot, there is no list of OS options displayed, it just boots to windows. Below are the details of how I got to this point.I Used GParted to delete all partitions off a hardard drive. Then installed win7 from CD. Win7 works fine. Then I formated an ext4 partion and installed Ubuntu 11.04 from the iso CD. But on reboot I don't see a list of OS options. When I boot from the Ubuntu 11.04 CD, I can view the usual Unix directories in the hard drive Ubuntu root (bin, etc, lib, usr, var) and the /boot/grub directory. So Ubuntu looks like it got installed. What else can I trouble shoot to get the list of OS options displayed?
View 6 Replies View RelatedLinux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
I downloaded the Lubuntu 10.10 Live-CD ISO and burned it to a CD-RW disc. The Lubuntu Live-CD fails to boot on my secondary PC. It boots fine on my primary PC. The PC on which Lubuntu fails to boot is a Dell Dimension L (year 2000). Celeron 566 MHz. 192 MB RAM. That PC has Xubuntu 10.10 installed on HDD. Xubuntu runs fine. The PC on which Lubuntu boots OK is a Dell Dimension 4100 (year 2000). PIII 733 MHz. 512 MB RAM. The failing boot progresses to a point where I get a purple screen showing "Ubuntu 10.10". Underneath the "Ubuntu 10.10" is a progress bar consisting of four dots. The progress bar continually shows progress, but after a few minutes there is no HDD or CD activity. After about seven minutes I get a blank bluish-gray screen. After waiting an additional five minutes I pressed "Enter" and was returned to my original purple screen. The progress bar continued to show progress, but there was no HDD or CD activity.
View 2 Replies View RelatedI would like to know how to change the boot/startup splash screen in Lubuntu.
View 6 Replies View RelatedOn my dual core AMD with 2 gig of memory I installed Lubuntu in VirtualBox for testing and the install was very smooth. My primary OS is Ubuntu 10.04 and it runs sweet. When I boot the Lubuntu virtual machine all I get is the arrow cursor and a blank screen.
View 2 Replies View RelatedI've got it to the point it will run when you login by adding a line to the /etc/xdg/lxsession/Lubuntu/autostart file. Added "synergyc 111.111.1.11" and it works perfect. So the main question is, how can I add that line somewhere, somehow to start on boot and not by login?
View 1 Replies View RelatedI have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
I have XP on my IDE hard drive and Ubuntu on my USB hard drive (which is really an IDE drive with a USB adapter and external power souce). We've used Windows once in the past month, so we decided to jettison it. Two questions: 1. Can we simply delete all partiitions on the IDE hard drive and reformat or will this cause problems? 2 Is the write-speed gain worth switching the drives out, putting the Ubuntu drive in my IDE slot and my freshly wiped drive on the USB adapter?
View 3 Replies View RelatedI am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
I currently have a dual boot on my 160gb hdd, but even that feels cramped. i was wondering...I have a spare 40gb harddrive compatible with my laptop. could I just install the windows 7 installation there?
assumably i'd swap in the appropriate windows 7 hdd whenever i'd want to load windows 7 at Grub.
what do you guys think?
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
Alright so I'm currently in the process of trying to transfer a wubi install of ubuntu to an actual partition using LVPM. I need to use unetbootin with parted magic mounted (not sure if that's the right term) to my hard disk rather than a bootable flash drive. So I set everything up, downloaded parted magic ISO, ran unetbootin and selected the file everything installed smoothly. I then restart my computer and unetbootin is indeed in the boot list but when I select it, it remains at a black screen. I left it at the black screen for about ten minutes and nothing happened. I've tried a few times and nothing.
View 2 Replies View RelatedHave just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I am ready to reclaim the disk space that is currently being used by XP in my dualboot scenario. Per the Gparted scan below, my hard drive is currently being sequenced as sda1 (NTFS data only, which I mounted in Ubuntu and write my working documents to), sda2 (XP operating system/boot drive). Ubuntu is on sda3, with home on sda4. I'm currently running 9.10.
I would like to eliminate the contents of sda2, and migrate sda1 contents to ext4. Question is, what are the best steps. I have good backups of everything, and sync my NTFS data to a NAS.
My grub.cfg looks as follows (am running 1.97)
Code: