I have an old office PC that I need to shred the drive on. Problem is, I have no monitor for it. I do have the 9.10 LiveCD however. Can anyone walk me through how to do a format without actually seeing it? And to have it shutdown after?
View 9 RepliesI'm running 10.10, but this seems to be an ongoing problem. While every other OS on the planet seems to be able to high level format LS-120 super floppies in their IDE drive, Linux can't. DR DOS can. OS/2 can. Windows 98 forward can.
We aren't talking low level format here. We are talking "quick" format where a new FAT and label are written to the media along with the high level markings/surface scan.
I can load a disk, copy to it, delete from it, but cannot perform a high level format.
I've been trying to install 10.04 on a pc. The hard drive seems reluctant to let anything be written. I am wiping the drive with Acronis Drive Cleanser. After the wipe, should I have Acronis format or should I open the 10.04 iso and have the installer do the formatting?
View 9 Replies View RelatedI have a thumb drive that I cannot get a clean format done to use it as a boot device.Is there some way to do a lower level format (I am using Gparted) to get rid of this error?
View 6 Replies View Relatedim looking to erase all data on my toshiba equium a100-338 and install F14 Xfce but i want to remove the hidden vista partition on it first as it takes up around 7 Gb, i have tried to remove it with windows but it does not want to go! any ideas about a low level format tool or how i can remove this within fedora itself?
View 6 Replies View Relatedi need to shred (or at least do a low/high level format) the drives before giving them to my parents (because they know about undelete and stuff). so, what apps can i use in ubuntu to do this?
View 4 Replies View Relatedi had encounter 1 of my pc ide harddisk suddenly failed.it shows me imminent drive failure, replace by new disk, backup your data. this message shows at boot or startup during bios process.there was ntfs c/d drive partition and i install windowsxp+ubuntu over windows as testing purpose. running fine slowly i found the hard disk response very slow. at last it is dead.now it shows hard disk via various utilities like gparted, booting.but i want to know, can we do low level formatting, what are the benefits of this. what tools r best to do recovery hard disk or repair harddisk. disk partition utility usualy do not have this features. is there any way to recover such hard disk that still shown or appear on screen, but no data, since i found it wipe out eveyrthing from drive
View 6 Replies View RelatedHow can I adjust the levels at which the battery is considered to be critically low?ight now it seems this is set at 5 or 10%. I want to make it 20 or 25%This is for Gnome. I am using Lucid x86
View 1 Replies View RelatedI've been able to kludge a kill script which finds the correct pid for the kdeserver (or gnome server) after my system comes up in run level 5 so I can drop back to run level 3 mode. Lots of experimentation showed me that using telinit 3 and telinit 5 would occasionally leave the video memory in a mess and I would have the black screen of death.
I set the security parameter setting to autologin for me since I am the only user of my machine, but I still have to kludge the default setting under sysconfig (the DEFAULT_WM) under Window Manager to pick a certain window manager, so it takes time to manually switch the desktop.
Right now I can leave the gui and drop back to cli, but painful experimenting showed me that killing the X server is a no no. Right now I kill the kde server, which sends the SIGTERM to the X windows manager, which then figures out that it has to shut down.
Questions: Is there a better way of doing this? Apparently openSUSE figures that we have multiple users logging into the gui desktop, so the gui is always kept running and a login window with the desktop manager option forces the user to login in. With autologin, this never happens, but no choice of desktop is possible on the fly.
Can some type of script be set up to painlessly enable this to happen? And what is the best way of bringing either the Gnome or KDE desktop manager down gracefully? I do get lots of error messages as the system attempts to recover and X shuts down. It appears that apparently the single user with autologin is left out in the cold.
I want to install a software called TinyOS which is an operating system designed for wireless sensor embedded networks in my account. The problem is it has instructions to install the software as an administrator since i'm not an admin of the department network i can not able to install. Is there any method to install this software as an user level rather than admin level.
View 3 Replies View Relatedhello everyone, im having a problem when my computer enters in the run level 4 as the default when i start slackware. The strange thing is that it not seems that is a X window problem, it looks like more like a configuration problem in some part of the kde script to initialize the log in, because if i manually start the X service it works fine, i dont know what is the source. Thank you in advance for the help.
View 3 Replies View RelatedI want to know what are the advantages and disadvantages for accessing spi(serial peripheral inerface )from kernel level and user level. like methods of doing it, speed ,memeory utilization etc
View 1 Replies View Related[code]...
you can find a cutout of an output generated by "iwlist s" command for a cell. Does anybody know what Quality, Signal level and Noise level mean? What is the definition of them? I searched for it and could not find good information on it. What do these Extra:*** fields for? What does it show in the example above? How were those values computed?
[code]...
Hi Guys,
here is my scenario:
I am running F10 x86_64 with Nvidia Quadro FX 3400.
I installed the drivers and it worked just fine. No errors generated according to Nvidia log files.
However, while in run level 5 when I try to switch to run level 3 by typing "telinit 3" or "init 3" the X server goes down and I get a blank screen. Same thing happens when I try to switch to a different tty session by <ctrl>+<alt>+F2 (or any F key for that matter).
I also noticed that when I shut down my system I can't see any more the screen where services are shutting down and their status ([OK] or [failed]).
Would appreciate your help on solving this issue.
Hey Guys, I'am new here and request your help on this:
After installing emacs and a few dependencies on my RHEL 5, on restarting the system, the keyboard was not able to work. I restarted several times in vein.
However, when I start in single mode, it works perfectly. I have tried looking for a solution from google, but in vein.
Kindly help...
Regards, Andrew
I have a directory that has a another directory inside it. The top directory is rather redundant since it only contains the one other one. Is there a way to delete the top level directory and have the contents simply "move up a level"?
View 6 Replies View RelatedI just upgraded to the 10.04 and everything works just fine as before (except for skype but that really doesn't matters as it has already been 3 years I'm using ubuntu and I managed to get it to work only once, for miracle I believe ^^). The only real issue I have is this: when I start up my laptop, after the log-in, no sound will be heared as the "speaker" volume level in alsamixer is set to 0; if I raise it from the terminal running alsamixer (as I don't know any other alternative) everything plays just fine, but the next time I boot I do have to do it all over again... So, how can I change the default startup level of the "speaker" in alsamixer?
PS: by the way I do have the very same issue with the screen luminosity but the other way round as is always starts at maximum brightness and I can't manage to get it to start at the minimum, as it did before. At least reducing the backlight if far more quick but a couple of times I forget it and the battery lasted something like half an hour
converting videos to 3gp format.
i have installed transmaggedon software but it fails to convert because quicktime muxer plugin is not installed.
This plugin is not available in the repositories.
How can i get this video converter to work or what else can i do to be able to convert videos to 3gp format?
just wondering is there a simple script to convert datetime to UTC format. I have been searching different forums but most answers are for converting UTC to datetime. For example what is a simple command/script to convert todays datetime to UTC format i.e. '2009-10-09 11:47:59'.
View 10 Replies View Relatedmy school we want to print a magazine but we have problem with the format of the files. We need to create a sheet in A3 format from two sheets in A4 format. I was reading about the pdftk library but it doesn't do what i need.
View 4 Replies View RelatedI need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
the time format i have used is %m:%d:%Y:%H:%M:%S eg- 06:21:10:13:29:18 and i want to convert it to 2010-06-21 13:29:18..
View 4 Replies View RelatedI downloaded the ChromeOS,the file that I downloaded is in .raw format, the site tells me that I must put the .raw image in the USB pendrive using ImageWriter(the site refers to the windows version).The problem is that the ImageWriter's version for Ubuntu cannot see files in .raw format, but only in .img format.I searched the internet how to put the OS'image this format inside the USB from Ubuntu but unfortunately I haven't found anything.
View 2 Replies View RelatedI'm still trying to find out if my coby mp3 player will actually play mtv video files as is advertised.
ffmpeg -formats does list mtv but the only command I really ever used was one to convert a vid to an mp3 so I tried Code: ffmpeg -i test.mp4 -acodec copy output.mtv it returns Code: Unable to find a suitable output format for 'output.mtv' I can't find any mtv files online for purchase or free for that matter, so I know this is all pretty obscure but shouldn't there be a way to convert them since ffmpeg lists mtv format?
I have a problem,I want to change the hour format from 24 hours to 12 hours, I cant find the way to do this,
View 14 Replies View RelatedI have some .mp4 files. While open this file using vlc-player the resolution is fine. Then I convert this .mp4 format to .avi format using "ffmpeg". While open the .avi file using vlc-player the resolution is not fine.
View 3 Replies View RelatedI am trying to format 4 GB sd memory using mkfs.vfat. I want to use the card both in linux and windows so I am formatting with Vfat filesystem. When I format the card from command line with "mkfs.vfat -F 32 /dev/mmcblk1" I am getting a warning message like "unable to get drive geometry, using default 255/63" but the data in the card is erased.
But when I mount the card and checks for the size using df -h its showing 1 GB instead of 4 GB. how to format the SD memory card or any other alternate way to format the card.
You right click on a file and choose Compress. How do you select the compression level for algorithms that support different levels? If you can't, what compression level does it use?
View 9 Replies View RelatedSo trying to use skype. all is going well, except when I speak or even as soon as the female voice from the testing service comes on, the input volume automatically starts dropping. this is an issue, as my voice sounds quieter and quieter as the call progresses. Any thoughts or how I may lock it at a higher input volume?
View 2 Replies View Relatedhow can i make apache to run in runlevel2
View 1 Replies View Related