Ubuntu :: Lost Evolution After Upgrade?
Jul 25, 2010
I upgraded to Ubuntu 10.04 and it seems to have lost my evolution email program and all the information in it. It is no longer on the panel and no longer in Internet applications but when I go to the software center it says that it is still installed. Is there a chance it is still there and usable? I'd like to keep it rather than switch. How would I find it?
View 4 Replies
ADVERTISEMENT
May 16, 2011
I just upgraded to ubuntu 11.04 and the evolution mail crashed and I lost most of my e mail files can I get them restored in any way?
View 2 Replies
View Related
Jul 3, 2011
I've just upgraded to 11.04 and I created a evolution-backup.tar.gz file as I've done in other upgrades. When I restored the backup and started Evolution, I've lost all the emails in top-level folders (Inbox, Sent, Drafts etc). My own custom folders within these top level folders contain the emails that I backed up. There are quite a few important emails that I've yet to respond to in my Inbox and this is very concerning. Also, I've lost all my Contacts!
View 4 Replies
View Related
Jun 21, 2010
I was configuring my evolution mail client a few days ago, typing in pop3 settings etc but my inbox remained empty, so i removed evolution from my applications and reinstalled it, for one reason or another my mail now loads up into my inbox, unfortunately the notifier (the envelope icon at the top right) now doesnt have evolution on it at all, only the chat program which i dont use. ideally this notifier would 'notify' me when mail arrives but at the moment this does not happen.
View 5 Replies
View Related
Jul 11, 2010
I seem to have lost my Address book in Evolution somehow !! All my addresses have disappeared. Is there some way that I can recover these ?Also how can copy/move/import all my Evolution data over to Thunderbird.
View 1 Replies
View Related
Jul 24, 2010
I seem to have all email settings still working, contacts and tasks all seem to be complete. I've rebooted - haven't been prompted for anything in particular.
View 4 Replies
View Related
Aug 8, 2011
my computer recently ran out of disk space, and for whatever reason (presumably bad coding!) that caused Evolution to freak out and deny all knowledge of my email account.Fortunately, all the email is still in present in ~/.evolution/mail/imap/me@foo.com but I have no idea how to make Evolution realise that and let me load it again.
View 1 Replies
View Related
Oct 26, 2010
I backed up evolution from lucid but when I restored it in maverick although my inbox and addresses were there all the folders I had created didn't appear. As a check I have a netbook and the file transferred fine to that (10.04 netbook remix) -that is with all the folders.
View 2 Replies
View Related
Feb 11, 2010
I had recently had a problem with my service provider and my system couldn't connect via the Internet. When I started Evolution, the problems started. Obviously it stalled for password confirmation from my Email accounts but I had to cancel any downloading of emails. The problem was I had to reconfigure my passwords for my email accounts, but I lost those folders that I had stored old emails in for each account. Is there a way to get these back b/c they have my passwords to some sites?
View 1 Replies
View Related
Sep 2, 2010
ut back the audio alert for new mail in Evolution. It dropped out an update or two ago.
View 2 Replies
View Related
Jul 18, 2010
I'm testing out Ubuntu 10.4 LTS, I'd like to upgrade my evolution 2.28 to the latest 2.8
View 1 Replies
View Related
Oct 23, 2010
I did an upgrade this morning, reboot, and when I open Evolution, it asks as if it were the first time I open it, if I would like to restore content. I lost everything, contacts (very important), dates (more than important, vital), mails (mails are no problem they can be retrieved from my pop)..
View 2 Replies
View Related
Apr 26, 2011
I think I've lost my MBR upgrading from ubuntu 10.04 to 10.10. During the upgrade it gave me a message saying which partitions did I want the grub details to go on, saying if I was unsure to select all of them. After reboot I just end up in a grub recovery console.The system was a dual boot with windows vista.how I can get both my operating systems to work?
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #256 for /boot/grub. sda1: __________________________________________________ _______________________ File system: ntfs Boot
[code]....
View 2 Replies
View Related
May 20, 2011
I want to upgrade my current evolution (2.30.3) with the latest stable release (2.32.2). How can I do it? Is there any PPA for that?
I am using Maverick.
View 5 Replies
View Related
Feb 26, 2010
I have 2 machines with ubuntu (now 9.10) and 2 with XP. After upgrading the ubuntu machines to 9.10 my wired LAN does not let me connect between the linux and MS machines. They did before the upgrade. Where and what should I check to see why the ubuntu machines cannot connect to each other or to the XP machines?I have looked at the network connections and it shows 'auto eth0', last used 'never'. I select the auto eth0 and click on the edit tab and the wired tab shows a MAC address and MTU is set to automatic. The 802.1x Security tab shows it not checked and grayed out. The ipv4 settings tab shows 'automatic'. The ipv6 settings tab shows 'ignore'.
When I click on the Places/Network, the Windows Network icon comes up. When I click on it, I get the MSHOME icon and the WORKGROUP icon. When I click on either of them I get message saying "Opening MSHOME" and then the message 'unable to mount, failed to retrieve share list from server'. The same thing happens when I click the WORKGROUP icon.
View 9 Replies
View Related
Oct 19, 2010
I upgraded from 10.04 to 10.10 and everything went smoothly EXCEPT that g++-4.1 and all its dependencies were uninstalled, and now it's nowhere to be found in Synaptic Package Manager. How can I get g++-4.1 back??
ps. I know that I can download source and build it manually, but there has to be a more "Ubuntu-ish" way of doing it.
View 9 Replies
View Related
Apr 29, 2011
I have lost wifi access with the upgrade to 11.4.Previously, the receiver icon showed on left click a menu of available networks, and on right click, available network by network settings for editing. The menu also included enable wireless connection and enable wired connection. I have wireless enabled.
But with the upgrade, the same menu appears on left click or right click, and they both show a greyed out "wireless disconnected" tab, so you can't connect from there, the tab is disabled. There's also no place else to go to find available networks or to lock into one. There also does not seem to be a place to find wired networks either.I installed my wifi network in it, and put in the correct password and set it to come on automatically, and 3x restarts did not yield any changes. Apparently network finding is disabled in this version or at least my copy.It isn't the computer: I'm on line with it now on the Windows XP side.
This is doubly problematic because if I can't get on line, I can't download a fix, and even if I could by downloading it to the Windows side, it is probably a binary with some very scripts and meticulous BASH coding or tarballing something else that I have no idea how to do even with a walk through by an expert because most of the time the experts assume I know as much about using a Linux terminal and code as they do, and I basically know absolutely nothing, it is all Greek to me from the point at which they say "open a terminal." "Go to root" might as well be said in Chinese as far as its usefulness to me. What is the plan here? A complete redo from the get go?
View 8 Replies
View Related
May 5, 2010
upgraded to lucid and since doing so the 2nd hard drive and my 2 cd burners don't show up in "places" any more.I have no way to access the 2nd hard drive which has all my media on it. As far as the cd burners, they work when i use a program that requires the cd burners but they don't show up anywhere.if i run lshw it shows the harddrive and 2 cd burners.
View 6 Replies
View Related
May 11, 2011
Way back in the day (7 something I think) I had made my .evolution into a link pointing to a very large harddrive. That said, I've never had a problem as evolution happily grabs and stores my e-mails at that linked location. Since the upgrade to 11.04, I still have evolution but it does not store it where I expect it to store it. I still have my little .evolution link in my profile. I still have my old e-mails there but I have no idea where evolution is storing my new e-mails. I don't have any of my folders and my online e-mail stack is growing by the minute
View 6 Replies
View Related
Jan 27, 2010
New and ignorant here. I got a new System 76 netbook, love it, went to upgrade Ubuntu and since, have not been able to get wireless to work. Wireless light is off, no switches work to activate. Unit has no CD drive, can't get on internet without connection. Not sure this is the correct forum.
View 9 Replies
View Related
Jan 28, 2010
I recently upgraded to koala, but gimp no longer functioned after upgrade; i.e. open file popup dialogue freezes, crop tool is non-functional, preferences dialogue was absolutely a blank box. Tried un-install/re-install thru both the new software center and synaptic. Same broken result every time. Tried a direct download from gimp.org but ran into a lot of dependency stuff I know nothing about; I'm an end user, not a coder. So, how do I get a functioning install of gimp?
View 3 Replies
View Related
Feb 9, 2010
I upgraded my desktop computer from 8.04 to 9.10 last night.
The second HD, which contains all of my music, used to mount as:
/media/disk/AllMusic
Now it mounts as:
/media/d7c7179f-d775-49ff-889e-661d6d188452/AllMusic
So the music player applications can't find the music, and neither can the other computers on my home network.
Ubuntu won't let me rename it.
How can I fix this and restore this shared drive?
View 4 Replies
View Related
May 29, 2010
I keep finding the same fixes on the web and they are not working. What I have/what I did: I have a dual boot PC. HD0 was XP. HD1 Kubuntu 10.04. I upgraded XP to Win 7. This jacked my Grub up, now all I can load is Win 7. I don't see the Grub menu anymore. I've been trying to reinstall Grub using varoius web pages like: [URL]
They seem to all be telling me the same thing but not working. I boot into a liveCD. I have to sudo apt-get install grub then I can do sudo grub. I follow the instructions:
sudo grub
> root (hd0,0)
> setup (hd0)
I get "Error 17: Cannot mount selected partition".
Now if I'm understanding this right the reason for that is. HD0,0 is my first HD first partition (which is Win 7), and grub doesn't like windows. I tried swapping it out so it reads:
sudo grub
> root (hd1,0)
> setup (hd1)
I then quit and reboot. Win 7 loads. I don't see Grub.I am using 2 separate hard drives?
View 9 Replies
View Related
Oct 26, 2010
Was upgrading from 10.4 to 10.10 using the Update Manager. All files downloaded and I think it was about 1/3 of the way through the Installation when I lost power. Now when it boots I have a purple screen with no login box.
Is there a way to restart the upgrade?
View 8 Replies
View Related
Apr 29, 2011
My apt-get was really really slow since the installation of 10.10. Doing downloads at 100~2000 B/s.So,I decided to upgrade the Ubuntu version by the CD, a big mistake by the way.Near end, the installation got crashed and frozen. Over 3 hours on same command line.Then, I hardly rebooted the system to get in the OS, and it works. BUT all data within /etc and /var IS GONE! My whole life was in "/var/www" and "/var/lib/mysql" and that is gone too.
View 5 Replies
View Related
May 1, 2011
Just upgraded to 11.04 afterwards I am missing a plug-in to see ..... type videos online. I think that in the process I was asked to disable 3rd party apps. If that is the problem, how do I re-enable the apps?
View 1 Replies
View Related
May 21, 2011
I installed a PPA repository ppa:danilo/evolution, and try to upgrade evolution from there. However, there was a dependency fail, and it did nothing. Thus, I remove the repository. Nonetheless, today I find out that my installed version of evolution is gone! and when I try to install it again, it says that danilo's repository has a dependency fail... and it does nothing.
[Code]....
View 3 Replies
View Related
Jan 1, 2010
I lost my FC10 and PCLinuxOS 2007. Ubuntu 9.10 64bit is good, as is XP and Vista. What's the repair procedure? My old menu.lst was this:
[code]...
Is it just a matter of editing partition numbers, as the old menu.lst?
View 9 Replies
View Related
Jan 16, 2010
This is my fourth on-line upgrade from Gutsy (started with Dapper ...) all the previous one went without a hitch !
So I was pretty confident this afternoon upgrading my Lenovo laptop from 9.04 to 9.10.
At one point during the install, I got error messages and was offer to do a "Partial Install". I accepted, different things happened, rebooted. Update manager came on with again the partial update pop-up. Accepted it again, it downloaded more files, rebooted, partial upgrade window again but it failed immediately.
The network connection was gone, clicking on the network icon I got a message that the network manager is not running.
I cannot check or uncheck the "network unabled" choice.
However, 9.10 is running, slow and weird, but no network connection so I cannot try to finish the "partial upgrade"
Every time I reboot the Update manager pops up.
Trying to boot any previous version in "grub" fails right away saying it is unable to mount the drives ...
Is there a way to start the Network Manager from a terminal ?
View 5 Replies
View Related
May 14, 2010
I would like to have your help.
I upgraded from 9.10 to 10.04 and lost my grub in between.
During the upgrade I installed grub on sda1.
Can you help me to recover my grub.
I inserted the contents of the RESULTS.txt here. code...
View 6 Replies
View Related