I am currently using Ubuntu 10.04 Lucid Lynx 64-bit. I installed several updates today so it might be a bug related to that, but now when I click lock screen,it no longer fades to black like it used to,it instantly goes to black. Not a MAJOR issue but I did like the fade better. Any way to get it back, terminal command or anything?
View 9 Replies
my desktop cannot be locked anymore. Furthermore, after waking up from suspend, I am straight in the desktop, it does not ask me for my password anymore. The screensaver also does not activate anymore either. I'm still using Ubuntu 9.10 on a Dell Latitude D820.
View 4 Replies View RelatedDoes anyone using Kdenlive know how to reset the colors? For a six minute project within the last couple of days my fade to black has become fade to red. I noticed it after a dist-upgrade. Nothing obvious has caused this. I've purge and installed, no change.
View 6 Replies View RelatedSince yesterday, Ubuntu boots into X-Windows. The violett background is there and also the mouse cursor. However, there is no login window, anymore. There is no possibility to login.I already tried something, but so far I was not succesful. I reinstalled plymouth, ureadahead and gdm. There could be a reason why my system does not work anymore. Yesterday, my root directory filled up to only 50MB free space. Now there is again 5GB.
View 2 Replies View RelatedI'm fairly new to Ubuntu and I like it a lot. However, there's a graphical error which started to happen after the very first bootup. The startup screen (the purple one with the 5 dots that appear) isn't showing anymore. It is replaced by some console technical guff scrolling down my screen (which isn't a problem, because Ubuntu itself works fine, but it just looks a bit rough). Again, on shutdown, it displays some amalgamated mix of more technical jargon, and a terribly lo-res version of the shutdown screen.
Is there any way I can fix this?
When i log in as root, and try to click the lock screen button, lock screen doesnt work? Is it disabled by default?is there anyway to lock screen when logged in as root
View 6 Replies View RelatedI have a new Intel Atom D510 and I'm pretty pleased with it so far. The board is Zotac NM10-ITX.
My first issue was that during long and fast downloads (like transferring my home directory over the network) the system become pretty unusable: web pages would time out, windows would take more than few seconds to load, etc. I solved this by recompiling the kernel for the Atom. (The compile time wasn't that bad actually because the system is pretty simple and it was easy to isolate only the drivers I needed).
My next issue is that certain GUI-related things seem a little sluggish. For example, when the GDM loads it's not smooth like on other computers. When I log in, my background doesn't fade in gradually, it does so in about 1-2 frames. I was thinking this might be an issue with the GPU. It uses the i915 kernel module. Is there some tweaking I can do?
Code:
I was expecting to see a memory region of prefetchable memory around 128M here. Is this a problem?
What are you atom users doing to speed up your systems? I'm on Archlinux and I'm using a BFS patched kernel.
I'm wondering why the num lock doesn't work in Ubuntu anymore? When you press the "num lock" key, you're supposed to be able to input the numbers along with + - * / and decimal point. When I press num lock and try typing numbers, nothing happens.
I've done a google search and this is a well known problem that nobody has fixed. In Windows it's never a problem.
Seems such a shame that the great Ubuntu and Linux are so good for stability and speed, but can't get a simple num lock working.
I have experienced that the button in my main menu "Lock Screen" does nothing, so I can not lock my screen. What could be the problem? Is there any command in terminal what I could write, so I can see is there an error output or something?
I am using Ubuntu 9.10, GNOME.
When I hit Alt+Ctrl+L my system is starting the ScreenSaver but not locking the screen. The keybinding is correctly set. This is happening in only root account but in another user account it works perfect !
View 1 Replies View RelatedUnfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
I tried to install Ubuntu on a USB HDD on my Macbok Pro 5.3. Everything seemed to be fine, but while rebooting the computer, OSX doesn't start anymore. So, I would say I erased the boot sector of the internal HDD or something similar but I'm not an expert. My internal HDD seems to be fine: One 200 MB FAT32 partiton partition labeled EFI and with the boot flag, One HFS+ partition for the system. I tried to boot with the Snow Leopard DVD and run the Disk Utility to make a "repair". The repair was fine, but the Mac still doesn't boot anymore. (Forget Ubuntu, it's only OSX related, I'll try again Ubuntu only when I'll be able to boot OSX again).
View 9 Replies View RelatedI'm using Karmic since November and standby/sleep has always worked fine. Some weeks ago, it stopped working fine.
After a reboot, I can put the system in standby only once. If I try standby after that, the system seems to do a normal standby, but it resumes at the moment the fans would normally stop working.
I tried different things like the s2ram program, pmi action sleep, etc. I went to the BIOS and tried a number of things, one was succesfull: disable USB. When USB is disabled I can go into standby every time. When I enable USB again (even with no devices connected), standby only works once again.
So, how can I disable USB at the moment I go into standby?
I have dual boot Windows XP pro SP3 / Ubuntu 9.04 and I only use the Windows to download torrents because the download speed on Ubuntu is terrible...
But by accident I pressed the power button when I was downloading in Windows and since then Windows won't boot anymore. Is this a Windows problem or is it maybe that it srewed up my grub? Because I can still select Windows in the grub menu but it stops at "Starting up".
If i use my Ubuntu some times per week, there isn't any problem. But if i don't use it for a short time (a week), when i want use it again and select it on GRUB.. after the first loading screen (on Ubuntu 10.04 the purple screen with Ubuntu in white and some points under), my screen is black. The computer screen is receiving signal because the led is green and not brown/orange like when is on standby mode. On Windows i haven't any problem.
First time it happened with Ubuntu 9.10. I didn't got solution for it and i format the partition and install the 10.04. But now it happen again with 10.04. I have an ATI 5770 and i have tried drivers since 9.12 till 10.4 (last ones the best i have had) On versions before 9.10 i had no problem, but i can't confirm that, because i had other graphic card (NVIDIA 9800GT). But the 5770 didn't work well on previous version so i updated to 9.10 and after this problem, updated to 10.04.
At spanish forum, people don't know solution for this problem, they never read about a similar problem. I hope you know a solution for it, because the only one i found and work is.. format and reinstall.
Update 6th March 2010: Update to Kernel 2.6.31-20 SOLVED the problem. Recording works again (still wouldn't in kernels 2.6.31-17 to 2.6.31-19). If a kernel update doesn't solve your problem, please read post 14 on page 2 by Mocha which seems to have solved the problem for other users without updating the kernel
Update 8th February 2010 to Kernel 2.6.31-19 did not solve the problem, please also read post number 7 for more details.
Quick Conclusion for other users who might experience the same problem:
After an update to kernel version 2.6.31-17 in Ubuntu 9.10 Karmic Koala, my external microphone did not work anymore. Playback was possible, just recording would not work anymore, although there was quite some background noise in the headphones. This made it impossible for me to use Skype and/or Sound Recorder.
All the possible solutions offered below did not help in my case (although you might give them a try).
I switched back to kernel version 2.6.31-16 where the problem does not occur.
Output: cat /proc/asound/card0/codec#* | grep Codec
Realtek ALC662 rev1
I know there are lots of threads about this topic, but I have spent hours on this problem already and none of the solutions offered so far worked for me so I decided to start this thread.
I have been using Ubuntu 9.10 and so far, my external microphone worked flawlessly in Skype as well as in Sound Recorder. A few days ago, I received a call on Skype and all the guy on the other side could hear was loud noise. I can only play sound, but not record anymore (i.e. the microphone doesn't work anymore). I tried two different microphones just to be sure whether one was defective and also checked it in Windows (where they both work).
I am not sure what might have caused this problem, I just remember a kernel upgrade about that time (not sure whether this is the reason though). I use 2.6.31-17-generic now.
Here is what I have tried so far:
1) Right-click on the Sound Icon in the top right corner and checked the following: in the hardware tab, it is set to analog stereo duplex, input is set to internal audio analog stereo (no other choice here) and the mic is NOT muted (playing with the volume doesn't help either) and output is set to internal audio analog stereo (again, no other choice) and connector is set to analog output (here I can switch to analog headphones or analog speaker, but makes no difference).
I remember that I could choose between Microphone 1 and Microphone 2 in the input tab; this is somehow magically gone.
2) Installed padevchooser, tried several settings to no avail
3) When I use "alsamixer" (version 1.0.20) in a terminal, Playback>Master is set to 100<>100, Capture is set to 150<>150, lowering and/or playing with these figures doesn't help either.
When I use "alsamixer -Dhw:0" in a terminal, I get the same results as in step four.
4) In Gnome Alsa Mixer, only "Beep" is muted, everything else is set to max. I have Master, Headphon, PCM, Front, Front Mi (x2), Lin, Mic, Mic Boost, Capture (x2, set to record), Beep, Speaker
I have tried to mute/unmute different setting to no avail. Now I wonder why I have two Front Mi and two Capture entries. This is different than it used to be, might this be causing the problem?
5) Fiddling with Pulse Audio Volume Control didn't help either.
6) Had a look at "paman" (pulse audio manager), not sure whether I should change anything here.
7) Installed "linux-backports-modules-alsa-karmic-generic" and rebooted as recommended in several threads, did not help either.
Added the parameters "model=auto" and "probe_mask=1" to '/etc/modprobe.d/alsa-base.conf', did not work, so I deleted the entries again (hint from [url], see post 5)
Now I am at my wits end. I need my microphone to work, especially for Skype, otherwise I have to switch to Windows every time I receive or want to make a call which is definitely not a long-term solution?
Does anybody have an idea what might be causing this problem? As I said, it used to work flawlessly just a few days ago and now I don't even know what I should do next to make it work again...
Output of "amixer"
When I run "alsactl init" I get the following result which might be at least a part of the problem, but I wouldn't know how to solve this problem:
Unknown hardware: "HDA-Intel" "Realtek ALC662 rev1" "HDA:10ec0662,103c303a,00100101" "0x103c" "0x303a"
Hardware is initialized using a guess method
I see that 9.10 doesn't use the xorg file anymore. What am i going to edit now? I just installed the ATI graphics driver and now i need to have ubuntu use it instead of the vesa driver. How can this be done with no xorg conf file?
View 4 Replies View RelatedI don't know whether it has to do with Googles revamp of their search page or something else but it doesn't work any more.
Typing:2+2 =
Results in:"Google Calculator could not evaluate the expression."
I'm using Ubuntu 10.04. GNOME Do 0.8.3.1
I've got a double boot system (Windows XP Pro and Ubuntu Maverick). Since I updated Grub2, Grub doesn't work anymore! I'd tried this (because I HAD that error). But since than, I'd a black screen (harddisk didn't anything, and Grub too...) And now, after using a couple of these commands via the Ubuntu Lucid Lynx Live CD I get a mini bash in Grub, but no entry's to one of the two systems! What's wrong, and what do I have to do? (and what did I wrong?
View 7 Replies View RelatedI seem to have caused a problem with the software center in Ubuntu 10.10. When I pick out a piece of software and click 'install' I see it doing something (CPU goes up etc.), but the usual "fill in your password" window doesn't pop up and after say 10 secs the 'install' button in the software center returns to its normal state, i.e. as if I hadn't pressed it yet at all.
I am afraid this is related to a manual install (i.e. through apt-get in a terminal) I did some time ago (I was following an online tutorial to get DVD playback working properly) that probably went wrong (the installation process did get stuck at some point, when it hadn't progressed for a long time (>1 hour) I saw no other option than to quit the terminal). I don't remember exactly what packages I was trying to install though.
What would be the best way to get software center going again?
I recently installed vsftpd on my system and it was running fine for my system users. Now I wanted to add virtual users so I googled it, I found this tutorial: [URL]
I did what they've been saying over there but when I restarted the vsftpd I couldn't login with the virtual user and also not with the system user anymore. This is the error ( with the system user who could login before ):
Code:
Status:Verbinden met 109.230.234.21:21...
Status:Verbinding aangemaakt, welkomstbericht afwachten...
Antwoord:220 (vsFTPd 2.2.2)
[Code]...
after installing trying to install veetle on my ubuntu 10.04 64 bit I always get the message at the start-up:could not update /home/user/.ICEauthority.my sound control does not work anymore (message: 'waiting for sound system to respond')using Krusader I get the message 'Cannot talk to klauncher: The name org.kde. klauncher was not provided by any .service files.I checked the owner of .ICEauthority and the permission and they are OK. Same for my /home. None of the suggestions found in the other threads worked.Veetle has been installed using the install.sh script and there is no unistall option
View 3 Replies View Relatedmy touchpad worked out of the Box after insalling Xubunut 11.04 and did so ever since. But since yesterday it doesn't. It worked when i shut down the laptop and didn't when i booted later. How do i fix this? Yes i read the article about thouchpads.
View 2 Replies View RelatedEmpathy doesn't retrieve contacts anymore! But its problem just include gmail accounts only!! Other accounts work fine
View 9 Replies View RelatedWhat happens is that I resorted to deleting my .kde directory after my kid destroyed my profile where title bar, menu, konsole get broken. After deleting, I login again thus regenerating the .kde directory. To avoid my kid from messing my desktop, I tried to lock it. It does not lock.
It just need a KDE full restart perhaps since when I login the other day, it now works.
I'm updated to Slackware current for almost a month already and have not played a lot on KDE desktop (busy programming stuff).
However, on day I tried to lock the desktop in KDE to avoid the kid from destroying my cool desktop setting, but it didn't lock. Cool, so I tried screen saver and add an option to lock the screen.
When I test screen saver, it displays. But when I wait for 1 minute(I set it that way), it doesn't fire up. Not even after 15 minutes which I think the default.
It usually work before (several months ago) using the lower version of KDE. It is just last Saturday that I noticed it.
I tried to dig the profile management but I could not find anything relevant there.
It never notifies me about any updates.
In my startup following line is present:
update-notifier --startup-delay=60
In my repository settings I have chacked that it should llok for updates daily.
After an update firefox doesn't load anymore. Whenever I try to install anything apt-get fails and warns me about broken firefox packages. It is mentioning firefox branding and chrome something (the latter seems to have gone away after I removed firefox via synaptic) apt-get install -f fails also.
View 1 Replies View RelatedAfter the last updates (in which there was also the 2.6.35.28 kernel) my audio isn't working anymore. When i open an audio file, it goes foreward with steps like 5 secondos and i can't listen nothing. Videos i can see, but with no audio, and ..... videos go at like 2x speed (and also here no audio). I tried booting with the 2.6.35.27 kernel, but doesn't change anything.
View 1 Replies View RelatedThis morning I switched my machine and the Update Manager prompted me to upgrade.So, as usual I did it. After upgrade it asked me to restart. Since then id didn't boot anymore. Now I have blank screen with a blinking cursor ... immediately after the BIOS screen, so it looks that no OS is loaded.
View 9 Replies View RelatedI have little problem with NetworkManager. This problem begin when I upgraded Debian Etch to Lenny.
When I right-clicked nm-applet in Debian Etch, I get this dropdown menu where was button "Edit Connections..."
Now in Lenny there is only "Edit Wireless Connections" button. So I can't edit my wired connections anymore.
I know I can just edit /etc/network/interfaces file to set my IP, but I need about 20 different IP:s at work, so that is just stupid do it that way...
