Debian :: NetworkManager Doesn't Like Me Anymore / Solve This?
Mar 19, 2010
I have little problem with NetworkManager. This problem begin when I upgraded Debian Etch to Lenny.
When I right-clicked nm-applet in Debian Etch, I get this dropdown menu where was button "Edit Connections..."
Now in Lenny there is only "Edit Wireless Connections" button. So I can't edit my wired connections anymore.
I know I can just edit /etc/network/interfaces file to set my IP, but I need about 20 different IP:s at work, so that is just stupid do it that way...
I recently installed Fedora 15 x86_64 on my new AMD Machine and I'm quite pleased with things thus far.Here's where my problem comes. I mainly bought that machine to help me with Development. More specifically, Virtual Machines for testing purposes. I have installed Fedora 15 x86_64 as a qemu-kvm Virtual Machine and it's working.. for the most part. I am having a whole lot of trouble getting it to connect to the Internet.
My guess is the only way I'm going to reliably do that is to setup a Bridge. Yes/no? However, in order to setup a Bridge I need to disable NetworkManager and that where the fun happens. It completely disables my network connection. I'm probably missing something small, but I can't figure out what I'm missing. I've double checked my ifcfg-em1 multiple times(I've been trying for ~24 hours so far) and all the settings are as they should be.
I've turned NetworkManager off and stopped it(chkconfig and service) and turned network on(chkconfig and service). Theoretically I should simply need to turn off NM and turn on network and things should be fine. no?
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.
Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).
I have recently bought a branded Onda MT835UP USB broadband modem. The hardware comes with its own drivers/GUI for linux, however I'd rather use the Debian-provided NetworkManager+modemmanager packages.
A few details:
- I'm using debian unstable, - latest NetworkManager 0.8.2-3 from experimental - latest modemmanager 0.4+git$foo from testing - latest usb_modeswitch[_data] from experimental
My system doesn't boot anymore, when I turn on the laptop, instead of the normal grub screen, i get the following:
"error: file not found Entering rescue mode... grub rescue> _"
I tried also to make a bootable usb w/ unetbootin but all the distros failed to load w/ a syslinux boot error message so I really need to fix the existing debian installation to get access to my files i need for the university, it's debian stable (6.0.4) on hp mini 210 ....
not sure exactly when this broke, but for some reason I'm not able to use CTRL-ALT-F1 anymore to fall back to the first virtual console.I can kill X with CTRL-ALT-BACKSPACE just fine, but I'd like to be able to get a normal shell to kill things when I've messed too much with graphical stuff.
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
I've just upgraded my netbook from Jumping Jalopy, was it? to Karmic Karla 9.10 and I was obviously remiss in not taking note of the various sub-programs, libraries etc, that it was deleting. Now NetworkManager doesn't connect to my wi-fi whereas before it picked up immediately and was as solid as a rock thereafter. This version is apparently 0.7.996 although I cannot see this number on the Synaptic list. My wife's laptop is ok so the problem is on the netbook; I've checked "Edit Connections" and they're both the same.
So presumably the upgrade has removed something NetworkManager needed, but what? I've looked down Synaptic but there's just too much stuff there that I don't understand, likewise an attempt to trawl back through past threads on here. I'm barely computer literate, all assistance very gratefully received! How do I find out what dependencies it's lacking?
Just upgraded from Fedora 10 to 11 and cannot setup wireless connection via NetworkManager. By some reason it doesn't store WPA key. There are following errors in the message log:
Code: Aug 14 14:37:05 mike-dev NetworkManager: <WARN> connection_get_settings_cb(): connection_get_settings_cb: Invalid connection: 'NMSettingConnection' / 'uuid' invalid: 1 Aug 14 14:37:11 mike-dev NetworkManager: <WARN> wait_for_connection_expired(): Connection (2) /org/freedesktop/NetworkManagerSettings/2 failed to activate (timeout): (0) Connection was not provided by any settings service
Kinda fed up with NetworkManager. Since trying the betas of F11 on my laptop, i've had endless bad experience with it.
Installed version: 0.7.1
Aside from the description below, please let me know what detailed system info you want to see (specific commands appreciated).
When i log in, the applet loads. However, it doesn't connect to the last Wifi connection i used. My SSID is hidden, so i click on the applet and choose "Connect to hidden wireless network". i see my stored connection in the drop-list. i select it, and all fields are greyed out, the WPA key is blank, and the Connect button is disabled.
Leaving that dialog, i delete my stored connection and re-create it manually, setting all the information correctly. i have DSL, using my DSL modem in bridging mode, and for some reason NetworkManager doesn't retrieve the DNS entries from the modem, whereas Windows does. So i have to set the connection to "DHCP (Address Only)" and manually add the IPs for my DNS.
However, the connection doesn't initiate, so i click the applet again and attempt again to connect to my hidden SSID, using the newly created profile. Same problem: no WPA key, all boxed disabled, and Connect also disabled.
The ONLY way i can get this thing to connect is by deleting my stored connection, clicking to connect to a hidden SSID, and create the connection from the New dialog. However, then i still have to go into Edit Connections and set the DHCP and DNS correcly before i can reach outside.
This is ridiculous, and i haven't been messing with any other configuration. i had a thread when F11 was still in beta where i had inconsistent results with NetworkManager. After thinking i got it fixed with some help, and discovering it wasn't, i decided to wait for the final release to see if it would work any better.
(automatically connect to the last active connection), consistently (connects when it loads at login every time), Otherwise, if there's a different connection manager, i'm open to that as well. Especially if the alternate connection manager can automatically retrieve DNS settings the way Windows can.
how nobody else could have run into this in the meantime. [URL] Two friends of mine are having the same issue on Ubuntu-11.4-machines. In short: Connecting to the Cisco-VPN via shell-command "vpnc" works flawlessly, whereas NetworkManager just doesn't connect at all. We had this working in older versions of Fedora/Ubuntu about some months ago...
I remember that I was able to connect via bluetooth with my nokia, then networkmanager was able to recognize my phone as broadband modem and I was able to estabilish a broadband connection, why now isn't possible?? networkmanager after bluetooth pairing doesn't show any broadband connectionopensuse 11.4 kde 4.3.6
I am running Fedora 13 with the nvidia blob for OpenGL hw acceleration, everything x86_64. I have spent a couple of days trying to get either Morrowing (TES3) or Oblivion (TES4) working under wine, unfortunately without success.
I have tried several flavors of wine: 64-bit wine from the fedora 13 repo, 32-bit wine from the fedora 13 repos, 32-bit wine 1.3.2 built from source. In all cases, running either of the games I get the same error (using WINEDEBUG=+d3d): "Direct3D requires OpenGL support." Appareantly wine d3d layer can't access to the nvidia OpenGL driver, and therefore d3d is disabled within wine -- making the two games not to start up.
I have tried looking around for a solution, but in all cases I found the root of the problem was missing OpenGL support / missing drivers. This is not my case; I use OpenGL everyday, and hardware acceleration is clearly supported in my configuration (confirmed with `glxinfo | grep direct`).
I think that wine might have problems accessing the 64-bit ogl drivers, but I don't know how to confirm it, and even less how to solve it. Clearly, installing Windows is not an option
on my dell latitude e6510 opensuse 11.3 kde 4.4.4 with tri boot windows 7 and two suse if boot with windows7 and I connect to internet by wired eth0 and then reboot in opensuse, networkmanager doesn't find my networkboard eth0 but only wireless, I have to reboot, enter in bios setup, exit, reboot, and then opensuse find my eth0, I tried with gnome too but is the same
In previous openSUSE versions I was using WICD as network manager. I upgraded my openSUSE to 11.4 and resolved give a try to the NetworkManager. I can get network connection, but the dhcp doesn't update the /etc/resolv.conf, so I can't navigate because the dns isnt set.
I tried to reinstall all related packages (dhcp, dns and networkmanager) without success.
If I run dhcpcd the resolv.conf get updated, but dhclient doesn't do the same. It seems that's a dhclient script issues, but I don't know how to test.
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
I'm trying to get KNetworkManager to run a script after my wireless connection is activated. I created the script in /etc/NetworkManager/dispatcher.d using the same format as scripts to start firewalls, but it doesn't seem to run. I can run the script successfully from the command prompt, but it doesn't happen automatically
yesterday I installed openSUSE 11.2 on my laptop. But I'm having problem getting the wifi configured properly. During the installation I got the message "No network running" (which I also saw after the installation when using the network configuration module of YaST after switching from ifup to NetworkManager). After installation NetworkManager seemed to work fine, it detected my wifi card, found the network, and I could even connect to it. Then the problems began, no Internet connection. The first thing I tried was pinging Google which yielded an "unknown host" message. So I checked /etc/resolv.conf, to look for the DNS servers, which where missing.
I added them manually and tried again. Still no luck, so I started pinging my router, which worked, tried again pinging Google using one of there IP addresses, which failed. So I ran route to find out which routes where being used, this one gave an unexpected result, because it only showed the route to the local network (I'm not sure about the loopback one, because this was also a lot of times missing when testing):
have You noticed that mt command doesn´t work anymore on 11.4? We try to install new version to hadle robotic library, but someone has written mt command as a new, and it doesn´t accept mt -f command anymore. cpio based mt command it´s not reliable as old one. Can anyone tell where to get old mt command which is compatrible new 11.4 x64 bit version?
I tried to install Ubuntu on a USB HDD on my Macbok Pro 5.3. Everything seemed to be fine, but while rebooting the computer, OSX doesn't start anymore. So, I would say I erased the boot sector of the internal HDD or something similar but I'm not an expert. My internal HDD seems to be fine: One 200 MB FAT32 partiton partition labeled EFI and with the boot flag, One HFS+ partition for the system. I tried to boot with the Snow Leopard DVD and run the Disk Utility to make a "repair". The repair was fine, but the Mac still doesn't boot anymore. (Forget Ubuntu, it's only OSX related, I'll try again Ubuntu only when I'll be able to boot OSX again).
I'm using Karmic since November and standby/sleep has always worked fine. Some weeks ago, it stopped working fine.
After a reboot, I can put the system in standby only once. If I try standby after that, the system seems to do a normal standby, but it resumes at the moment the fans would normally stop working.
I tried different things like the s2ram program, pmi action sleep, etc. I went to the BIOS and tried a number of things, one was succesfull: disable USB. When USB is disabled I can go into standby every time. When I enable USB again (even with no devices connected), standby only works once again.
So, how can I disable USB at the moment I go into standby?
I have dual boot Windows XP pro SP3 / Ubuntu 9.04 and I only use the Windows to download torrents because the download speed on Ubuntu is terrible... But by accident I pressed the power button when I was downloading in Windows and since then Windows won't boot anymore. Is this a Windows problem or is it maybe that it srewed up my grub? Because I can still select Windows in the grub menu but it stops at "Starting up".
If i use my Ubuntu some times per week, there isn't any problem. But if i don't use it for a short time (a week), when i want use it again and select it on GRUB.. after the first loading screen (on Ubuntu 10.04 the purple screen with Ubuntu in white and some points under), my screen is black. The computer screen is receiving signal because the led is green and not brown/orange like when is on standby mode. On Windows i haven't any problem.
First time it happened with Ubuntu 9.10. I didn't got solution for it and i format the partition and install the 10.04. But now it happen again with 10.04. I have an ATI 5770 and i have tried drivers since 9.12 till 10.4 (last ones the best i have had) On versions before 9.10 i had no problem, but i can't confirm that, because i had other graphic card (NVIDIA 9800GT). But the 5770 didn't work well on previous version so i updated to 9.10 and after this problem, updated to 10.04.
At spanish forum, people don't know solution for this problem, they never read about a similar problem. I hope you know a solution for it, because the only one i found and work is.. format and reinstall.
Since yesterday, Ubuntu boots into X-Windows. The violett background is there and also the mouse cursor. However, there is no login window, anymore. There is no possibility to login.I already tried something, but so far I was not succesful. I reinstalled plymouth, ureadahead and gdm. There could be a reason why my system does not work anymore. Yesterday, my root directory filled up to only 50MB free space. Now there is again 5GB.
how to get linux onto an old laptop (dell inspiron 2600, 1GHZ, 120MB RAM). the cd drive doesn't recognize CD's anymore and in boot menu, "Setup Utility" the usb drives aren't recognized. the usb drive or pen drive boots in another desktop just fine. i need to somehow install xubuntu or crunchbang or something lite but must do it using net install. i see lots of tutorials but they are either too complicated or unknown source, like "inslux." and not too complicated of a process. I'm a "techie-tard," i guess. also, i'd like to suggest a new "sub-forum" in "distribution" forum, Called "General Distro."
First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub. Before I would have just edited menu.lst, but now?? I dunno. edit; Here's fdisk with Fedora on sda6
