I would like to make a LiveCD type iso image of my system as it is currently configured. Do I just use mkisofs to make an iso of my existing system, then use Startup Disk Creator to make it bootable? I have used Startup Disk Creator to make bootable flash drives using the install iso; maybe I should somehow just add my /usr directory?
View 3 RepliesIve gotten a project from a local school in a very rural town to upgrade the computer systems on a very low budget. So, being a F/OSS advocate I ran the idea of a linux environment which, in reality will cost hundereds (maybe thousands) less for them, and also cut down "down-time" due to viruses and such. I was thinking of Ubuntu since its got a great community, and personally, I love it. Problem is, this school is on a limited bandwidth for internet, so installing ubuntu and performing the updates is not a feasible idea since the cost will be astronomical. My question is, how can I go about an simply "update" the ubuntu 8.10 LiveCD so that when I install it, It will have all the updates? Another thing that would be nice, is that this school would like to have their own wallpaper, so if I could change the default wallpaper while I'm performing this "update" will be very nice.
View 5 Replies View RelatedAfter a Christmas morning scramble trying to get Sims3 working for the kids, I ended up pulling an Nvidia 6200 AGP card out of a perfectly good Ubuntu box and threw it into the kids' PC. I replaced it in the Ubuntu system with an old Nvidia Geforce 2 Ti AGP. From the start I was unable to get any resolution higher than 800x600 with the GF2. Tried removing xserver-org, reinstalling, reconfiguring, etc. Installed the Nvidia legacy drivers, all no luck. Tried booting with a 9.10 live CD and it works perfectly - various resolutions, refreshes, etc. So, the card is capable. I've checked, rechecked, restored, modified xorg.conf to no success.
I'm at a text login now, startx returns (among other info) the following:
dlopen: /usr/lib/xorg/modules/drivers//nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
(EE) Failed to load /usr/lib/xorg/modules/drivers//nvidia_drv.so
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available
Fatal server error:
no screens found
Now, I've checked, and nvidia_drv.so is where it's supposed to be (in the drivers directory). What concerns me is the "//" in the directory path string in the (EE) above preceding the driver name - shouldn't this be a "/"? Is the command not able to find the driver correctly? Regardless, at this point my goal is simply to get the system to use whatever process the live cd is using which results in a working GUI. Don't need fancy 3d, etc, just want a working system.
I made this thread last night~[URL]... Because my Ubuntu failed, and i have no idea why. I hadnt done anything different or risky.. and Ive no idea what to do. So, It appears Im going to have to do a re-install. Which, I really dont mind too much... (especially with Ubuntu) But It will stink if i *again* lose all my bookmarks , and lose track of all my installed programs. The programs, not as much of an issue as the bookmarks in my browser.. I would like to know, If I can somehow access the HDD from the LiveCD, So that I can create just a simple text list of all programs installed on the hdd? I cannot access my HDD except through the LiveCD So is there a way I can do this? Some kind of simple command I can toss into terminal, and have it output me a text file of all programs installed? or something? I really am totally clueless on how I would be able to save my chromium bookmarks.
View 9 Replies View RelatedI am having trouble installing HPLIP (all versions) onto my system. When I go to configure the source code, it goes into a loop checking for a BSD install. So, to get around this I want to try and install HPLIP onto the system via a livecd. How would I go about doing this?
View 5 Replies View RelatedI have Ubuntu 10.04 installed on my system and I have Kubuntu 10.04 live CD.
and I want to install kde environment on my current system with live-CD and without connecting to the Internet.
I just installed the XFCE4 desktop environment after installing 'menu'. I then logged out and logged back in after changing session to XFCE. My question is weather or not my installation and configuration of TOR and Polipo are going to work the same within this environment? Am I going to have to reconfigure? Or is this just a change in how the desktop environment is handled within Ubuntu?
View 2 Replies View RelatedI've been using Linux for about 2 years now, mostly Ubuntu & derivatives, but I've also tried Fedora, Mandriva, and others. I wanted to give CentOS a try because I'm very interested in going for a Linux+ or similar certification, and so I'm looking to start learning how to configure & maintain Linux servers and so on. I have a friend who's a Linux sysadmin, and he recommended CentOS as a good learning tool.
Anyway, I've only got a wireless connection in my office at home (the actual cable modem is downstairs) so I intentionally chose a wireless adapter that would work with Linux -- it has a Realtek RLT8187 chip, for which there is support built into the kernel, or so I've read. It has worked out of the box in just about every distro I've tried, and indeed it worked OOTB when I tried out the CentOS 5.5 live CD.
However, when I actually installed the CentOS to my hard drive it no longer worked -- I have only a greyed out option for a wired connection (presumably since my motherboard has an ethernet adapter, but there is no connection). Why the wireless would work in the live session but not after install? Is there a firmware file or something I need to track down? I did look on this page, but it doesn't mention anything about RTL8187.
I there a way to check which desktop environment installed on a machine using only commands in a shell
View 5 Replies View RelatedHow can I add KDE desktop environment in newly installed 'moonOS-3'.
View 2 Replies View RelatedI'm sure there is something I have done wrong. I have installed GNOME, but on start up it doesnt give me the option to select it. How can I use GNOME?
View 9 Replies View RelatedI recently started an installation of Debian Lenny. During the install, I accidentally chose to install "Desktop environment" when I meant to de-select it (I hit enter, which was obviously the wrong key to de-select) so what should I do now? Should I restart the install, and be more careful the next time the task selector comes up? Should I let it continue, and uninstall all the X stuff afterwards (and how would I remove ALL of the stuff installed with the "Desktop environment", 10GB hard drive
View 3 Replies View RelatedI have Ubuntu installed on my pc and it's just the way I like it setup. I want to make a LiveCD.
There was a tutorial (sorry can't remember URL) for remastersys but it was obviously obsolete as the lines to add to the repository were no longer live.
What is the absolute easiest way to create a LiveCD, hopefully something that is GUI based.
I have a Ubuntu, Kubuntu 9.10 live CD which I know work because I have installed on my other computer, (HP Pavillion ze2000), and also linux mint 8 and openSUSE 11.2, which also run/work. However when I put them in my current computer and restart, the computer simply ignores them and carries on with vista. I have been testing out the live CD's on VirtualBox and on my second computer and they look pretty nifty But the computer just ignores them as if they weren't there.
Specification :
Hp Pavillion dv6 notebook PC
Windows Vista service pack 2
AMD athlon X2 Dual Core
2.00 GB RAM
32 bit
X86-based PC
I'm trying to run Ubuntu off the Livecd but when I start my imac it ignores the cd in the superdrive. Any suggestions?
View 9 Replies View RelatedI'm using kubuntu 9.04 live cd to see how it works but cannot connect to the internet. I've put in the proper WPA passkey, although it calles it password, ame thing i hope, and added the ip address along with everything else and still cannot connect. Btw, this is on an Acer Aspire 5610 laptop.
View 2 Replies View RelatedI can change the bootup screens, but is it possible to unsquash the filesystem on a Mac?
View 2 Replies View Relatedhow do you install Ubuntu over SSH with a liveCD? OpenSuse allow you to do this (well, they used to - maybe it was browser based).
View 3 Replies View RelatedRecently I got a new computer:
Intel core 2 duo E7500 chipset
Gigabyte s-series GA-G41M-Es2l
Intel G41 express chipset.
I inserted the ubuntu 9.10 disc in and I clicked on livecd option and few seconds latter I got a trace back report. Is it that my motherboard doesn't support ubuntu or what is wrong. Why can't I boot into livecd?
I have an old office PC that I need to shred the drive on. Problem is, I have no monitor for it. I do have the 9.10 LiveCD however. Can anyone walk me through how to do a format without actually seeing it? And to have it shutdown after?
View 9 Replies View RelatedAs with almost every time I try to simultaneously install two operating systems, I have incurred the wrath of GRUB. It's probably more to do with my laptop's terrible hard drive, but here's my problem: I had a 9.10 install and a swap space on this hard drive, then I used GParted from the BT live CD to resize shrink the Ubuntu partition to make space for a BT install. I booted into Ubuntu just to make sure it was working fine. it was. Then I went back in to the BT live CD to install it on the free space.
When I booted up after install, the GRUB screen had changed (obviously), but now only the BT installation (which appeared as Ubuntu 8.10 for some reason) would boot, The previous Ubuntu installs had stopped working, and now came up with "file missing" or "file not found" (cant remember). I tried fsck -v /dev/hda1 (where my 9.10 installation was), and it didn't seem to have any errors. What's wrong with my computer (or GRUB)?
I've asked this in another forum, but I'm not sure I phrased it very well. I have a desktop and a "server" at the house. The "server" is sitting across the room, with no keyboard or mouse. If I were to boot the server from a LiveCD, could I then get in with SSH and kick off the setup remotely? I'm getting "Connection refused" when trying to ssh in, so I'm guessing that the service is probably not turned on.
I checked into Reconstructor, and I think that may be the way to go, if I can figure out what I need to do. I'm thinking all I need to do is install an SSH key and start the service, then I can get into it from my desktop and proceed with the install.
Is this possible to do? Or is there a better way? I know I could lug the keyboard, mouse and monitor over to the other machine to do it, but that would mean that I couldn't do anything on my desktop (since that's where the keyboard, etc. would come from).
Is skype available and usable from the live CD/DVD? Before meddling on the hard drive with anything, I'd like to see if my mom's aging PC is up to Skype at all, worth upgrading, or needs completely replaced. She has Win98SE on it, I think it's some breed of Athlon but can't remember and it's to far away for me to look at it right now...
View 2 Replies View RelatedI managed to mess up GNOME on my ubuntu laptop. Now, I can't connect to the internet because the network manager applet is removed. Is there anyway to reinstall gnome from the livecd of ubuntu? Also, I want to uninstall GNOME and install LXDE, is there anyway to do this without uninstalling any of the applications that are installed by default with gnome, such as openoffice.org or firefox?
View 8 Replies View RelatedI'm trying to boot off a USB LiveCD of Ubuntu 9.10 in order to save some data off a botched UNR install. However when I try to boot off said USB drive, I get this error:
Code:
process 2425: arguments to dbus_pending_call_set_notify() were incorrect, assertion "pending != NULL" failed in file dbus-pending-call.c line 596 The error repeats constantly until I turn off the netbook (EeePC 1008HA).
I've tested the USB drive using the "Check disk" option in the boot menu, and it comes up clean.
I just downloaded the Release candidate, for 10.04, and as I was testing it on VirtualBox, I notice that the LiveCD option, (or Test ), is missing? Should I re-download, or it's an error from VBox?
I don't have unlimited bandwith, I was lucky enough to download 2 ISO's yesterday, cause there was nobody where I live, so I could use the WiFi all I could. What do you think, bad ISO, or problem with VBox?
Last week I very eagerly downloaded Ubuntu 10.04 and burnt it to a CD. I just want to try out the new version using the Live-CD. I tried it on both my home desktop and my work notebook. I was able to get the initial screen where I can select the language and keyboard, etc.. But when I tried to start the program I ended up with a blank screen one both computers.
So I just thought, I will wait until they get these problems fixed then I will download and burn a new cd. Question, have their been fixes to the ISO file since it first was released that would fix these kind of problem? How does one know if the ISO file has been upgraded; is there something after the 10.04.01 or something like that?
I am trying to do a fresh install on the HDD that had 9.10, a 80GB ext4 drive. All that shows up is my other HDD, a 160 GB ext3 drive. Why is this happening? "ls /dev/|grep sd" only returns sda and sda1. My 80GB drive has a few partitions, one for swap for instance.
Edit for clarification:
2 harddrives in 9.10:
80 GB HDD /dev/sda
1 ext4 partition that has ubuntu installed (/dev/sda1)
1 extended partition (/dev/sda2) for swap (/dev/sda5)
160 GB HDD /dev/sdb
1 ext3 partition /dev/sdb1
Only the 160GB HDD is detected when using the liveCD (as /dev/sda and /dev/sda1). I can mount it just fine, but my 80GB HDD is not detected. After ejecting, I can boot my 80GB HDD just fine...
I'm rolling my own version of the LiveCD (directly, not using the apt-based tools) and I'm trying to lock it down. I'm doing things like setting up iptables to only allow network activity with tor and whatnot, but I can't figure out how to lockout root. I've set the password for root and commented everything out of sudoers, but when I boot from the resulting iso, the sudoers file suddenly has "%admin ALL=(ALL) NOPASSWD: ALL" appended to the end, which tells me that somewhere is in the boot process the file is modified to have that.How can I disable this process? I really want to lock down the system so that root is impossible to reach.
View 1 Replies View RelatedOne year ago I decided to give it a try with Ubuntu. I used the 9.04 Live CD, but it didn't perform as expected - it gave randomly errors on boot up, the interface was disappearing and reappearing, applications closed themselves randomly and in the end it usually froze and I had to do the magic SysRQ or hard restart. I installed it then through Wubi - and it was somewhat more stable. It behaved sometimes excellent all the time until I restart, but sometimes it just crashed with an error when I boot up. When 10.04 came out, I wanted to try it out, so I burned the CD.
It was the same as the 9.04 when using the Live CD and when installing it using Wubi it just fails on 25%. I don't have any problems with Windows 7 and another distribution like Knoppix (6.2) runs just fine and smooth from the Live CD. No problems what-so-ever. I haven't did any clean installation on my hard drive because I don't know if this would persist and leave me with a not working system. I still would like to address the problem from a Wubi installation or the Live CD before going for a full installation.
Here is my machine:
AMD Sempron 3300+ @2.0GHz
NVidia GeForce 7300LE 384MB
1 GB RAM DDR1 (2x512MB)
A31G PCCHIPS Mobo