I can't boot from LiveCD, it just gets to the console and informs me that squashFS mount failed for loop0. I don't want to go for full installation before I test it a bit.
View 2 Replies
xubuntu iso was downloaded with wget on Kubuntu, I did a md5sum checksum in terminal which passed, also K3b's check passed. K3b burned iso with no errors, I set speed at 4x. I made two coasters before getting this far but it still won't get past the BusyBox built-in shell prompt after choosing my language and staring at the xfce mouse for a minute:
Code:
BusyBox v15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
(initramfs) Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
is what I get when trying to boot live cd on both my Linux PC and Windows XP box.
I upgraded 9.10 to 10.04 via the web. The program announced it would take several hours, and when I came back to check, computer was off (kids?). Anyway, machine boots and 10.04 starts, but then blinks a few times and goes to a prompt. What should I tell it?
I have a 10.04 disc too, but it won't run from that either (Cannot mount dev/loop0 on filesystem.squashfs failed). Same message when I tried to start a nearby Windows machine with it. Disc "verified" when I made it. What's with that?
I am getting error while mounting loop dev over mount_dir. my step as follows:
#mkdir /mount_dir
#mount -o loop /mount_dir
mount: mounting /dev/loop0 on /mount_dir failed: Invalid argument
So i insert the ubuntu 10.10 in the dvd and boot it. The menu comes up and i choose to install ubuntu. After that it shows some black screens and this error:
(initramfs)mount:mounting/dev/loop0 on//filesystem.squashfs failed: Input/output error cannot mount /dev/loop0(/cdrom/casper/filesystem.squashfs)on//filesystem.squashfs
The disc aint scratched. I tried installing from Windows but i got another error.
And for some odd reason Ic ant make a removable startup disk:
I just dl'ed and burnt a 10.04 ubuntu disk (using infra recorder), and popped it in, the ubuntu load screen showed and progress got nearly done then a message shows:
"(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error.
Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs."
EDIT: I did have a 9.1 disc somewhere that did work OK before now (but lost is )
The boot.ini file for windows fail(reason unknown) and now i cant boot to any installed OS. Used Ubuntu live from usb to explore the disks, but as i tried to mount the W�ndows partition it failed..
Code:
# mount -t ntfs-3g /dev/sda /media/c/
ntfs_mst_post_read_fixup: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument
Record 0 has no FILE magic (0xffffffff)
[code]....
I've just got a new laptop with 4GB RAM available, in order to fully utilize the available memory I'm going to install Ubuntu Lucid Lynx 64bit, but when I boot with Live CD, I always get the following errors:
Code:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
I'm having troubles installing ubuntu on my "Acer one 522" netbook, I have made a pendrive with unetbootin and ubuntu 11.04 natty and upon booting into the usb i get the boot loader displayed properly, start to load ubuntu, then about halfway through i get some screen tearing with a really small shot of the boot loader screen in the top left hand corner followed by some command lines saying "cannot mount /dev/loop0 :invalid argument".
View 1 Replies View RelatedI did try
Code: Select allmenuentry "Debian live 8.2.0 KDE" {
insmod loopback
insmod iso9660
set isofile="/debian-live-8.2.0-i386-kde-desktop.iso"
#recherche de la partition dans laquelle se trouve le fichier ISO et montage de celle ci dans "/"
search -sf $isofile
[Code] ....
in /boot/grub/grub.cfg without success...
it goes with Ubuntu, Mint, Vinux, Trisquel (all last Ubuntu like ISOs at distrowatch) interchanging "live" through "casper" (3 time above).
what is the adequate Debian method?
The trouble I'm having is that when I load a bootable USB/CD of 64bit 10.10, I always get an error that looks a little like: "(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error. Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs." I've done some googling and I've noticed people have had the same problem. They say the alternate downloads could be the problem, or the CD, and that I should use the UNetbootin application. I guess I should start with describing my build:
[code]....
I've tried:
1. Going to the DL page, DLing 64bit 10.10, and mounting the image to create a bootable CD (by the procedure offered on the DL page).
2. Using Unetbootin to create a bootable USB (this I did multiple tmes, with different versions: 10.10 64bit desktop, 10.04 64 bit desktop, and I'm about to try another DL except I forgot which one I'm using, but I'll find out in a bit )..........
Trying to install a newly downloaded DVD image of 11.04 this morning on my T410 LT (4 core/4GB). The image MD5'd okay, burnt it, stuck it in the drive, rebooted, asked me about install lang = english, select install ubuntu, get subject error and it falls into initramfs prompt.So, I put my 10.04 install CD in and guess what, it works!
I will repeat what I have already posted in the another forum, and I understand install is a difficult part of the system, but there is always some glitch or another just trying to start install with ubuntu. Once it runs, if it run, I normally see few other problems after that.
my friend using XP and it was closed because he didnt activate it . he want to try Linux , i adviced him to use UBUNTU 10.10, but after we order the boot we got a loading screen for ubuntu then this error appeared
Quote: busybox v1.15.3 ( ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) enter 'help' for a list of built-in commands. (initramfs) stdin :I/O error mount: mounting /dev/loop0 on //filesystem.squashfs faild: no such device can not mount /dev/loop0 (/cdrom/casper filesystem.squashfs) on //filesystem.squashfs udevd[75]: worker [171] unexpectedly returned with status 0x0100 udevd[75]: worker [171] failed while handling ' /devices/virtual/block/loop0'
i change the cd to another one but an error was changed to :.............
I have had a dual boot on my system since first trying Ubuntu a few months ago.I had a few problems when i upgraded to 11.04 (mainly due to the new desktop Unity), but after some great help here, we had the old desktop running again.I have Windows running on my spare Computer in case i should need it for any reason, though can not think of one lol Now i am used to Ubuntu (from the using side, get lost in terminal etc so here i come if i need help) i decided i would totally commit my main computer to Ubuntu.I downloaded the latest iso from the Ubuntu site, and burnt it to CD, inserted in my main computer & rebooted. It goes past the first purple ubuntu page (hit a key to choose language & also get a selection Menu) then goes to black screen and i get:
BusyBox v1.17.1 (ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash)Enter 'help' for a list of built-in commands.(initramfs) mount: mounting /dev/loop0 on //silesystem.squashfs failed: Input/output errorCan not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs(hope i typed that i correctly)I have burnt the iso image numerous times, using different disks, speed (from x4 - x52) and burning programs
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View RelatedI have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
It seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies View Relatedi have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur."mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host"
View 1 Replies View RelatedI have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedI just upgraded Xubuntu from 10.04 LTS to 11.04 and I am no longer able to mount removable media from the "places" menu. The message I get:
"Failed to execute child process exo-mount (No such file or directory)"
I assume some wrapper process is attempting to execute a program called "exo-mount," but no such program exists anywhere in the repositories, according to a search with apt-file. The "exo-utils" package used to contain exo-mount, but the program no longer exists in that package.
Mounting from within Thunar works fine.
I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph
[Code]....
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I tested 10.10 LIVE CD Gnome version.
I did some disk operations on NTFS and FAT volumes.
It worked well.
When I wanted to shutdown from the right upper corner icon,
I got a black screen saying:
(process:272) GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
it does not take any keyboard, incl cont+alt+del
may it be a bug?
