Ubuntu :: Latest Thunderbird On Lucid Lynx From Stable Mozilla Channel?
Nov 11, 2010
I am using Lucid Lynx (10.04.1) and I use Thunderbird from the official Ubuntu-Mozilla PPAs:
[URL]
I see that each release of Ubuntu has only one supported version of Thunderbird - in case of Lucid Lynx it is 3.0 series. Is it possible for me to upgrade to 3.1 on Lucid Lynx through this official channel? I don't want the other two solutions to achieve this:
1. Download the latest Thunderbird directly from Mozilla website (No. Updating it manually for the next release is a pain and I don't want to get into it)
2. Upgrade to Maverick (No. I prefer LTS releases and want to stick to Lucid)
View 1 Replies
ADVERTISEMENT
May 24, 2010
I have been doing periodic net-based dist upgrade since 7.10. Currently I use 9.10. Now that 10.04 is out, I want to upgrade to the latest LTS version by doing a clean install, instead of using net-based dist-upgrade.
Since I use Firefox, and Thunderbird, I want to keep the passwords/bookmarks I have stored in firefox, and mail/account settings (for multiple email accounts) that are in Thunderbird.
While I know I can copy the hidden profile directories for each, and back them up for recovery after the upgrade by copying them into the new 10.04 after install is complete, I don't know if this is recommended, prudent, or if pitfalls await me. Since I want to do a clean install, and, since 10.04 uses different versions of both Thunderbird and Firefox,
1. Would it be prudent to back up/use the existing profiles I have in 9.10, or should I bite the bullet and just start fresh with new profile setups when I finish installing 10.04? 2. Are there any pitfalls I need to be aware of if I will be restoring a profile of each from 9.10?
3. Or, should I continue to do net-based dist-upgrades to 10.04 so appropriate profile changes can be made by the new versions of Thunderbird/Firefox software?
View 3 Replies
View Related
Oct 21, 2010
Is it safe to put my old .mozilla and .mozilla-thunderbird folders from xandros 4.2 into OSS 11.3? I have apps, emails, and settings that I would like to keep. This might seem like an over precautious question, but I've broken Xandros more than once. I would hate to do it to OSS.
View 2 Replies
View Related
Oct 11, 2010
Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies
View Related
Aug 19, 2010
i have ubuntu 10.04 installed and i haven't touched anything apparently relevant in its configuration. many times, when an application opens a new window and this should receive focus, it doesn't. for example, i'm in mozilla thunderbird and i click on "write" to write a new message, and i keep waiting, "why does it take so much to open???" - until i realised that the new message window was immediately opened but it didn't get focus, it is just blinking (in a barely pereivable way) in the panel on the bottom and i have to click on it to give it focus. it is not just thunderbird - just about any program, but not always. sometimes the same happens when switching some flash player web application to fullscreen mode (such as videos or megavideo): the full screen does not appear, i have to click on the icon on the panel on the bottom.
sometimes, even more weired behaviour are observed. for example, let's suppose i have windows a, b and c open and none of them is minimized. i'll call "icon" a window's button on the bottom panel. i click alternatively on icons of windows a, b, c, a, b, c and so on. expected: every time i click on a window's icon, the window should get focus and be brought to the front. observed: when i get to window a, it toggles its state from open to minimized and viceversa, that is, when i switch from c to a, it does as if i was already on a, so instead of bringing it to front, it minimizes it; then next time i come back to a, it gets restored.
View 6 Replies
View Related
Dec 23, 2010
"requires installation of untrusted packages" roadblock in updating Ubuntu10.10, I downloaded and installed 10.04 LTS, hoping it would be reasonably hassle free. I've used it prior to my 10.10 upgrade, so I was very surprised to learn it doesn't support Mozilla Thunderbird email client, which I've been using on every Ubuntu version since I started with the 9.0x series.
Does any body know how to get around this? According to the Software center, Thunderbird is available for installation, but the install fails saying (no surprises!!) "Requires installation of untrusted packages"
View 1 Replies
View Related
Jul 30, 2011
I'm running Mozilla Firefox 3.6.17. Can someone tell me the easiest way to upgrade to a newer version? When I search on Google, I get ;lots & lots of pages & they give me 20-different instructions on how to do it & i'm confused. Not sure which command to use (There is no "upgrade" option in the "tools" area of Firefox.) Do we upgrade in the command-line?
View 6 Replies
View Related
Jan 21, 2010
Ubuntu 9.10 64-bitFirefox 3.6 I just upgraded to the latest build from Ubuntu-Mozilla-Daily and I recieved the following error:
Code:
/usr/lib/firefox-3.6pre/firefox: 59: dirname: Permission denied
/usr/lib/firefox-3.6pre/firefox: 88: /bin/pwd: Permission denied
[code]....
View 9 Replies
View Related
Sep 9, 2010
I have Thunderbird 3.0.6 from openSUSE-11.2-Update repo. Where can I get it updated to 3.1?
View 9 Replies
View Related
Mar 11, 2011
I have debian sid installed, but when run the command aptitude dist-ugrade there is 202 packages nearly all the kde desktop and when run the safe-upgrade there is every day some upgrades, so want to use the latest stable debian, i have look on the debian dists and there is debian 6.0, sid, squeeze, stable and wheezy. what is the name of latest stable debian dist?
View 2 Replies
View Related
Jan 15, 2011
i've reverted back to using 10.04 from 10.10, and not i cant find Mozilla lightening calendar for Thunderbird in the repositories!
View 2 Replies
View Related
Oct 28, 2010
Can someone tell me which is the latest stable kernel version available in the repositories?? Is it 2..6.35-22 ??? if so, when will 2.6.36 be available??
View 4 Replies
View Related
May 20, 2011
I want to upgrade my current evolution (2.30.3) with the latest stable release (2.32.2). How can I do it? Is there any PPA for that?
I am using Maverick.
View 5 Replies
View Related
Nov 11, 2010
On my previous release *cough* if inenslave was needed, bonding instructions didn't work through aggregation did.
cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto bond0
iface bond0 inet static
address 192.168.1.149
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 127.0.0.1
broadcast 192.128.1.255
post-up ifenslave bond0 eth0 eth1
pre-down ifenslave -d bond0 eth0 eth1
#auto wlan0
#iface wlan0 inet dhcp
#netmask 255.255.255.0
#wpa-conf /etc/wpa_supplicant.conf
For some reason the unmentioned former disto, I could not get wireless networking under this configuration and a simple wlan0 interface, in case either cable were to sever it would retain a wireless. The bonding was done for speed, and I believe I can't get faster than mode=4.
View 1 Replies
View Related
May 24, 2010
I like to import mails from Evolution 2.28.3 into Mozilla Thunderbird 3.x. I guess I'll have to export them into mbox format. Correct ?
View 8 Replies
View Related
Nov 21, 2010
I am attempting to install the latest Mozilla ActiveX control in order to install need for speed carbon. When I try to install the ActiveX control, it runs successfully for a bit, then says: Code: The Mozilla control was unable to detect where your Mozilla layout libraries may be found. You will now be shown a directory picker for you to locate them. It pops up a directory listing, but no matter what I pick, it returns:
[Code]....
I googled for "Mozilla layout libraries" and saw that apparently the win32 ActiveX build has a problem, but the thread appears to be from 2005, so, although it is the same error, I doubt if it is the same problem. Not just that, I don't have a windows compiler anywhere, so I couldn't recompile anything with that fix anyway.
View 5 Replies
View Related
Apr 3, 2011
Installed Tumbleweed today and was disappointed to find the latest stable KDE not installed.
4.6.2 is running fine on my 11.4 install.
I would like to use 4.6.2 in my Tumbleweed install.
Can anyone recommend the appropriate KDE Stable repo for Tumbleweed?
View 4 Replies
View Related
Aug 2, 2010
gnome.org that hosts gtk-doc seams to be down. Does anyone know where i can download the latest stable version of gtk-doc?
View 1 Replies
View Related
Nov 16, 2009
I have done some searches and none of them tell me how to recover or where/what the file name is for the Mozilla passwords. I was able to recover the bookmarks. orrupted my system doing the 9.4 to 9.10 upgrade and I am trying to rebuild the user one piece at a time.I also need to know how can i recover my mail from Thunderbird. Basically I have set up a new user and am trying to move stuff over from the old user one piece at at time until I can figure out how to fix the old user.
View 14 Replies
View Related
Apr 6, 2010
I'd like to upgrade the latest version of Mozilla Firefox?
View 3 Replies
View Related
Jun 11, 2011
I use openSUSE 11.4 64 bits with KDE. For a specific reason (incompatibility with our internal revenue website) I'll have to downgrade to the latest stable FireFox version, 3.6 or something. I however do not know how to :
1. find this repository
2. when found, install it over my current 4.0.1 version.
View 6 Replies
View Related
May 21, 2011
I just install the latest beta chromium by executing these commands:
Code:
The problem is I still want the Stable version of Chromium, and I want the developer version of Chromium not the beta release. So I got 2 problems: I need to downgrade this Chromium to the Stable release and then I want to install the developer release of Chromium and not lose this Stable release. I'm currently running 11.04 Ubuntu..
View 3 Replies
View Related
Apr 5, 2011
I am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
View 9 Replies
View Related
May 17, 2011
GNOME commander (latest stable version) does not show mounted volumes at panel. OS: openSUSE 11.4 GNOME 64bit
View 3 Replies
View Related
Apr 29, 2010
I've just upgraded from 9.10 and everything is good, accept that netbeans will not load.
I get the netbeans 6.8 splash screen then nothing
View 6 Replies
View Related
May 18, 2010
I am trying to install Lucid on my Laptop but can't get the live cd to boot correctly. At the moment, it's giving me a purple screen with a white logo at the bottom, then a black screen with the underscore character blinking, and then nothing. (I have an HP tm2, with a USB DVD/CD drive. 64bit intel core 2 duo. I am using the Ubuntu 10.04 Desktop AMD64 .iso. I also tried the i386 .iso)
View 1 Replies
View Related
Jul 15, 2010
Ubuntu 10.04 is unable to set up my Canon Pixma IP 6000D printer.So earlier tonight when my wife wanted 2 recipes she saw on this am's Today Show, I had to restart my computer with a Fedora 13 live CD in the drive. F13 quickly installs my Canon printer and I am able to print the recipes.But this sure is a convoluted way of printing 2 short text files.to get my printer to work with Ubuntu.I've been using Ubuntu almost 2 years now, and love it, love it, love it, except for this one little thing.
View 3 Replies
View Related
Nov 3, 2010
What exactly are the different features btw Ubuntu 10.04 LTS vs 10.4.1 Lucid Lynx?
View 4 Replies
View Related
Apr 20, 2010
Quote:
The new Wacom Bamboo Pen (CTL-460) doesn�t work in Ubuntu Lucid out-of-the-box. You need a newer kernel module than the one that comes with Lucid by default. It�s pretty easy to get it working though, you just need to know how.
First, install some compiling tools and header files:
Code:
Code:
Now unpack, configure compile and install it:
Code:
# I know this is the wrong version, but it's the highest available and it works
Code:
The tablet should work now. You can also add the module name to /etc/modules to automatically load it on boot.
He also says (and I can confirm) that the gray lines are the new borders of the tablet. A little annoying, but I imagine one could configure that, too.
View 9 Replies
View Related
Apr 27, 2010
I upgraded from Karmic to Lucid yesterday and today today I've noticed that I can no longer apt-get update through the terminal. I'm behind a corporate firewall, so up till now I've always exported the proxy address like so:
Code:
export http_proxy=http://user:password@address:port
This hasn't worked under Lucid. I did some searching and found that Lucid did away with
[code]....
View 5 Replies
View Related