My Thinkpad R32 keyboard & trackpad will not work when booted off the HD with 9.04, I can plug in an external USB keyboard & that works fine.
If I start the laptop from a Ubuntu LiveCd the keyboard & trackpad work fine.
There must be some system file disabling the onboard keyboard, I have used Keyboard Preferences to try different keyboard models.
I've installed Ubuntu 10.04 on a Packard Bell laptop and I'm having some trouble with the trackpad and keyboard. At the login screen they both work fine, I can move the cursor and type in my password. But after I login they both immediately stop working and I have to use a USB mouse and keyboard.
View 1 Replies View RelatedMy keboard was working perfectly (backlight, inverse FN) until upgrade from karmic to lucid. Now neither backlight neither inverting FN (in pommed.conf) works- backlight is always off, FN is default OSX-like.
Trackpad worked "almost superb" (missing click with one finger and drag with another!!) but after upgrade (=no mode udev) event number changes with every reboot so I cannot put configuration based on /dev/input/eventX to Xorg.conf. How can I make it have the same number after reboot now?
I'm having some weird problems with my mouse and keyboard. I'll be moving the mouse and keyboard about and all of a sudden the keyboard won't respond and the mouse moves and is fully working, but it seems to be a problem with the desktop, more then the mouse, because it'll highlight stuff and certain stuff will open when I click them, but when I go down to the toolbar, and try to click applications, places, and system, it'll highlight it but not respond when I click it. This happens about every 45 Minutes, to 1 hour of time with ubuntu running [10.04] [Additional details]
- I'm using an HP Pavilion Dv6000 Laptop, 64 Bit Ubuntu 10.04
- My drivers are all up to date
- Could it be because my Laptop gets really hot? But it dosen't happen ever when I'm running Windows, so I'm not so sure about that.
I am able to boot Fedora 14 to the GUI, log in on the keyboard, see the desktop, and then I get no response from the laptop's keyboard or trackpad.
I do not know how to obtain hardware specifics on my keyboard or touchpad, so perhaps that would be good info for me to start with...
BTW my ultimate goal is to run an Amahi server on the laptop. 2600 has a pentium III 1.13GHz processor and 512Mb RAM
I'm using Ubuntu on my Lenovo laptop which has a pointer mouse and trackpadt looks exactly like this:How do I disable just the trackpad, but not the red pointer mouse or the buttons above/below the trackpad.I did do a search and found a file I can download, but isn't there a keystroke or something built into Ubuntu that would avoid me having to download a third party solution.
View 5 Replies View RelatedI am running Ubuntu 10.04, randomly while working in gnome with no particular application I get a freeze periodically. Neither the mouse or the keyboard will respond. I am running it on a lenovo Z61m laptop. I have had previous experience with Posix systems but I am a recent migrant from XP as my primary operating system. I never had such an issue with this computer which leads me to believe that it is not a hardware issue.
View 1 Replies View RelatedI just installed slackware 13.37 64 using luks and lvm by following this. However, when its time to enter the password, my usb keyboard won't work. I included the uhci-hcd, and usbhid modules when running mkinitrd,
View 3 Replies View RelatedI was looking into installing Gnome for Slackware 13.1 due to the instability of KDE and I was able to find GSB [URL]. I ran the simple installation: Code: lynx --source [URL] Everything downloaded and installed so I logged off, ran xwmconfig and set it to gnome and then tried starting my xserver and my screen turns black with a single white dash in the corner. My keyboard doesn't respond (the lock lights won't turn on) and I'm stuck on this black page. I tried changing xwmconfig back to KDE and the same thing happens
View 14 Replies View RelatedI am using Debian with a gnome desktop.
Code: Select alluname -a
returns
Code: Select allLinux app-server 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
My desktop sometimes freezes and does not respond to keyboard or mouse. I initially thought the CPU was overheating but it froze tonight when my CPU temperature was 32C and it has been up to 50C without freezing. I am beginning to think it is a software issue rather than a hardware issue but do not know. I looked at the pm-powersave.log and user.log but did not see anything suspicious.
I'm having trouble installing F11 x86_64, and I'm sure it is something to do with the video card.X will not even start if I have both nvidia quadro FX1700's installed. If I take one out, I can install F11, but it always 'hangs' when it starts X (which is to say, both the keyboard and mouse are locked - until I press the power button, but then it shuts down anyway).I've fiddled inittab so it starts in runlevel 3 so I can at least get in and tinker. There is no xorg.conf in /etc/X11, so I assume the system is building it's own and not quite getting it right (guess work based on other threads with similar symptoms).
I can connect to the system from another Linux machine via ssh, and I can ftp to it. I tried copying the xorg.conf from the other machine, but while it changed the screen resolution (ergo, it had some effect), it still went nuts. Starting X remotely via ssh allowed me to trap the messages, which indicate the lack of HAL has something to do with the problem.service --status-all reports hald stopped; I'm assuming this should not be the case. I've used yum to reinstall hal, but that made no difference. Nor did an update - it was already at the most recent level.F11 was installed from a DVD downloaded vai a bittorrent; the disk checked out ok.
My knowledge is limited, and I don't know what should be in xorg.conf for my machine, although I could type it in from scratch or ftp it across from here. It was 'okay' under F10, happily tolerating both video cards. But it seems to be sulking under F11. In case it matters, I'm doing everything as root; since firstboot starts X, I can't use that to create another userid.
- nomodeset, xdriver=vesa, selinux=0, remove rhgb as boot parameters - all to no avail (although these changes seem to be ignored for the most part anyway);
- start the HAL daemon manually (mine failed to start, as others have reported). It didn't like that! (the output is available, but is enormous)
- startx -configure - simply failed;
- dirconf didn't work;
- I've tried swearing at it during start-up, which turned out to be no more or less successful than anything else, but it was fun.
Intel Q6600 64 bit. Twin nvidia Quadro FX1700 cards (one removed for the time being) driving two 1920x1200 monitors each. Please let me know if there is any other relevant information I can supply.
Have just upgraded (14-->15) using the dvd option; installed the nvidia driver (I think) and am able to startx and get to the Gnome 3 desktop (Wallpaper and top "task" bar look correct)..But, the mouse and keyboard have absolutely no affect. No matter what I click on, or what keyboard combination I use, nothing happens..(Have spent the last 3 hours researching it; and just seem to be getting nowhere.. I can do anything I need to from the CLI; but am not sure what to do..
View 14 Replies View RelatedYesterday something has happened with power supply, so 2 of 3 PCs has shut down. And now my debian pc doesn't respond to multimedia (volume to be precise) keys, leds also doesn't work. Other keys are fine. Tried xev, but it doesn't respond to multimedia keys either. I have dual boot with Win7 on this machine, and it works fine with multimedia keys.
I believe this is a clue:
Code: Select all[ 22.324109] generic-usb: probe of 0003:04D9:1702.0004 failed with error -110
uname -a:
Code: Select allLinux sharlin 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 GNU/Linux
dmesg:
Code: Select all[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=57fa72ea-ce79-4da0-a74d-2ffee8573437 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[Code] ....
My keyboard layout doesn't work any more from one hour
I don't know why ?
i try to delete layouts like Arabic and USA English and add them again but the problem still working .I'm writing English lang. only.
when i press Alt+shift to change Lang. nothing happened
what i can do now ?
I'm using UBUNTU 10.10
I'm using netbook Acer Aspire One D250-0Bb pre-installed Windows XP. Now i have Gentoo. I have trouble with Xfce (lastest stable version) , where my keyboard don't react. I can move just with touchpad. I think, it's in X-server driver, but i can't find any information about that.
View 2 Replies View RelatedI am having trouble disabling my trackpad I want to be able to disable and re-enable it, if that is possibleI have a HP touchsmart tm2 laptop and would like to just usethe touchscreen sometimes
View 9 Replies View RelatedI can't seem to disable my laptop's trackpad. I use a USB mouse, and would like to turn the track pad off when I have my mouse plugged in. I've installed Gpointing Devices, but it seems to lack some of the settings it was supposed to have. I've attached a screenshot.
View 7 Replies View Relatedin order to get my trackpad's (eeepc 1201n, ubuntu desktop 10.04) multitouch scrolling to work, i paste these commands into the terminal every time i start the machine:
Code:
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Two-Finger Scrolling" 8 1
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 8 1 1
[code]...
Running Ubuntu 10.10 / Netbook Remix. I'm slightly annoyed that I can't Alt+F2 to start a program. Is there any way at all to start a program without having tomouse/trackpad?Bonus info:
Code:
kristian@napoleon:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
[code]...
I tried Ubuntu 10.10 on my MacBook, but I had a few problems. They, surprisingly, were not the problems most people have.
1) The trackpad had the "Tap to Click" setting on, but I couldn't find out how to change it.
2) The clicking was only right click.
I also had a few other problems that I will mention, but you aren't obligated to answer them:
1) I couldn't find my wireless network.
2) BootCamp isn't partitioning, so I can't really install Ubuntu.
I'm having trouble typing in ubuntu on my macbook because my palms sometimes touch the trackpad while I'm typing. I've seen a ton of posts about how to disable the trackpad when a USB mouse is connected, but I just want to write a scripthat I can run to unconditionally disable the trackpad and turn it back on. I don't care if it requires an extra keystroke or even if I have to write 2 scripts - one to turn it off and another to turn it on.
View 3 Replies View RelatedSo I have used ubuntu for about 2 years now, and this has never been an issue. Basically my trackpad(touchpad) on my laptop stops working when the wallpaper and other gui aspects load. The mouse works in windows and works in ubuntu for a few seconds while the screen is still black and gui is loading. So I know ubuntu does know it exists.
This problem occured after watching a movie and ubuntu froze up. Also while watching the movie I had the trackpad disabled, which might have something to do with my problem. (I have a hpdv6500 which has a button on the trackpad to disable it. I did no software tricks or hacks to do it). After resetting my computer the problem existed and persists every time I turn it on and off. So does anyone have any experience with such a problem or maybe how to reset the settings of the mouse?
After plugging a Razer Mamba into my Eee PC 1215n, my trackpad stopped working. When I restart, (with mouse unplugged or plugged), the trackpad works at login screen but as soon as I'm logged in, it freezes again, and I have to plug in the mouse.
View 1 Replies View RelatedI've recently installed Ubuntu 11.04 on my MBP4,1. Whenever I wake the laptop from sleep the trackpad seems to freeze up. Everything else works - I can use the keyboard to switch through programs and interact with them, but I can't move the trackpad at all.
View 1 Replies View RelatedI have an HP 6735s laptop that I have connected an Apple Wireless Keyboard and Apple Magic Trackpad to via bluetooth on 11.04.
When I login the keyboard automatically connects via bluetooth (once the gnome-bluetooth applet boots), however, I need to manually go into the applet and click connect for the trackpad. I can then run a script to start touchegg.
How I do set up the trackpad to auto-connect? I am guessing the built-in trackpad on the laptop is overriding it?
I have a dual-booting MacBook 5,3 which I was running 10 on with no trouble. I just upgraded to 11, and the trackpad doesn't work at all - no clicks, no movement. I've restarted several times - no change. Any ideas as to what I can do?I did play with my drivers a bit in 10 to get the trackpad to behave a bit more smoothly - but that was a while ago, and I'm not sure exactly what I can do.
View 2 Replies View RelatedI am using a 64-bit version of Ubuntu 10.10 on my Intel Macbook Pro 7,1, and I am having trouble with the trackpad. At first, it was working fine. But for some reason now, it only works about a minute after I start into Ubuntu, and then the cursor movement with the trackpad is disabled. However, I can still do mouse clicks with the trackpad, but to move the cursor I have to use a USB mouse. I am not sure what's causing this. I followed the instructions for installing Ubuntu on a Macbook Pro, so all the correct drives should be installed.
View 1 Replies View RelatedI am having issues with the gpu drivers and the touchpad, both of which seem to be traced back to xorg.conf.I can set the proper resolution using nvidia-settings, but it resets to 800x600 on restart no matter what I do. I have used the gui to save, I have tried nvidia-xconfig, and I have tried to just editing the xorg myself, but it always goes back.I am having even worse problems with the trackpad. I downloaded and installed the synaptics package, but nothing I do changes the trackpad settings. Mouse properties has no trackpad info in it.How do you properly configure resolution and trackpad settings on rhel?
View 1 Replies View RelatedI recently used BootCamp on my MacBook (2.1) to partition my hdd and install Ubuntu (karmic), and I am having trouble with the wireless connection. On the mac partition it works fine, but on Ubuntu there are no wireless networks shown in the network-dialog. Previously I had only a Linux-partition on the same machine, and this was not a problem. Also the trackpad does not work at all. Does anyone know what to do about the network connection? Also I should mention that I first installed the AMD64-version of Ubuntu, which worked fine even though my macbook uses intel. Im tempted to just go back to the amd-version, any views on that?
View 2 Replies View RelatedI have had a issue with the trackpad not working (cursor does not move, does not click) after I wake up my MacBook Pro 4,1 from sleep. I am pretty sure this is an X issue and not a driver issue because if I log out the trackpad works again. This is also sporadic. Sometimes it occurs, sometimes it does not. Is there some configuration I need to set to fix this?
View 3 Replies View Related