Ubuntu :: Install Fails To Recognize PATA Hard Drives
Aug 24, 2010
I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing Ubuntu 9.0.4 on. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive). If I boot Ubuntu from the DVD (on USB) and open a terminal window and parse the dmesg output I see the message "pata_acpi :xxx device not available because of BAR 2 collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.
View 7 Replies
ADVERTISEMENT
Aug 25, 2010
I have an Intel MB (855GME with 6300ESB) that I'm having trouble installing OpenSUSE 11.1 onto the IDE drive. It will install to a SATA drive but for various reasons I need to install on IDE (PATA on 6300ESB). The install fails to find any ide drive (I know the drive/interface works because I can install XP on this same ide drive and boot from it). If I parse the dmesg output I see the message "ata_piix 0000:1f.1 device not available because of BAR 2 (0x0-0x7) collisions". I'm trying to determine if there's some workaround for this. I've tried various kernel parameters and no joy.
I've tried Ubuntu with similar results. Older kernels WILL install onto this same MB/PATA controller (Ubuntu 6.06, 2.6.15 and RHEL4) so it seems that something changed in the ATA driver as the kernel has matured and my bios isn't up to snuff for these pickier drivers.
View 2 Replies
View Related
Aug 10, 2009
I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
View 1 Replies
View Related
May 7, 2010
I have been going crazy trying to get Ubuntu 10 installed and working on my G3 B&W. When I boot into the live CD, hit Control-Option-F2 to get into a terminal, then do Fdisk -l, it only shows my CD-ROM. I got 9.04 to install, then updated to 9.1, then to 10, but when I reboot, I get the gave up waiting for root error. Tried typing exit, and changing the wait time to 90. I've spent a lot of time on this, and learned a lot. Anyone no how to get past this?
View 2 Replies
View Related
May 20, 2010
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies
View Related
Aug 1, 2011
My questions begin with Virtual Box. I have Windows XP installed via Virtual box. Ordinarily, I hate everything about windows, but unfortunately some things related to my job I am still in need of having some access to some form of Windows. I am wanting it to recognize all of my multiple hard drives that are installed on this system, 4 of them to be exact, so that I can utilize files from all of them.
View 3 Replies
View Related
Feb 10, 2011
I just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies
View Related
Nov 5, 2010
I recently moved my ubuntu 9.10 server over to a new case with more memory, and when I did the webserver worked like a charm, but now apt-get is broken. Checked my 70-persistent-net.rules and saw the new NIC was there, so I edited my interfaces to use eth1 for the new NIC, but apt is still not working, failing to fetch everything. here is my 70-persistent-net.rules
Quote:
# PCI device 0x10ec:0x8139 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:40:2b:69:76:$69:76:1d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x10b7:0x9200 (3c59x)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:06:5b:4f:86:$4f:86:5a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
[Code]....
View 6 Replies
View Related
May 18, 2010
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies
View Related
Sep 1, 2011
I am doing a new build with an SSD / HDD combo, and I am wondering, is there a way I can install Ubuntu spread across both drives? I know I can do this in Fedora, but I haven't seen much of a feature like this in Ubuntu.
View 9 Replies
View Related
Feb 28, 2011
I have 2 hard drives and when I do an auto install.. Ubuntu decides to take both hard drives... how do I prevent this from happening without my intervention?
View 2 Replies
View Related
Oct 30, 2010
I have the newest Ubuntu installed on my machine. It currently has a 160GB sata drive. I just bought two shiny new 2TB drives that I want to RAID as 4TB. How do I go about adding these two hard drives even though install is complete? I want the 4TB assigned to my /home directory.
View 4 Replies
View Related
Mar 14, 2011
I have a D-Link DNS-323 network drive which mounts at multiple points to my filesystem when booting. I had to make some fstab changes when I upgraded from 11.2->11.3 last year, and now the same thing seems to be happening since I've upgraded to 11.4. When I login to my profile the desktop hangs and no icons appear. I cannot open a Nautilus window, or access ALT-F2, however just about every other program works fine. Since I disabled the fstab lines (slightly modified when copied here to generalize):
Code:
#//192.168.123.xxx/SHARED-FOLDER1/User-folder /home/user/Documents cifs guest,_netdev,uid=user,gid=users
#//192.168.123.xxx/SHARED-FOLDER2 /home/user/SHARED-FOLDER2 cifs credentials=/home/user/.scripts/.creds,_netdev,uid=user,gid=users 0 0
the desktop icons load and Nautilus works. Can I adjust my fstab syntax to correct this and get my network drives back? I think last year the issue was in referencing the ".creds" file...
View 4 Replies
View Related
Aug 5, 2011
I have searched for this but can not find it. I want to install debian 6.0 squeeze on to both of my hard drives and run each as a seperate instance of debian, and be able to choose at boot up which one I want to run. I have an HP with 2 500 gig hard drives, running windows vista currently, processor is an intell quad 2 core 6600, nothing else on the pc for programs and such at this time. I would also like to keep the windows if possible to run other programs at a later time.
View 10 Replies
View Related
Dec 11, 2009
First time linux user, am trying to install a fresh full install of Fedora 12 dvd i686 version. I have two identical sata drives, which fedora fails to identify. Have reset the bios, changed settings in the bios, still not finding them. I have an asus av8-x motherboard, with a athlon dual core processer.
View 5 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Oct 7, 2010
We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
View 7 Replies
View Related
Apr 20, 2011
The installation went smoothly however, I have installed SuSE11.4 on my 2nd Hard Drive. Now Grub doesn't work and I want to know where and how to install it.
View 9 Replies
View Related
May 28, 2011
i installed ubuntu desktop 11.04 on my acer aspire one 751h and found that the wifi didnt work. the netbook remix was the same so i went through all the previous releases up until 8.0.4.4 which worked fine on the live cd. so i tried to install but the installer didnt see my main hard drives only the usb i was using to install. so i tried using wubi installer which only left me with this screen when i tried to load up ubuntu.
View 3 Replies
View Related
Jan 17, 2011
I am running OSX Tiger (10.4.11) here on my trusty old G4 MDD with a "giga" 1.4gig CPU accelerator and doing quite well with it actually.I have discovered Gimp and Inkscape and love the open source concept.I registered only a few days ago, and have been lurking around to see if I can get a look at Ubuntu in action.Would it be possible to install some version of Ubuntu on a partition of one of my internal hard drives and be able to boot it, using the option key at power-up time?I guess this would be called a "dual-boot" situation.If so, can someone provide a link as to what to download.
View 5 Replies
View Related
Jul 5, 2011
I have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies
View Related
Mar 12, 2009
As I have no blank cds handy right now, I had to go the way descirbed here:URL...But when I seect my partition and / (no sub dirs, an empty ext3 formated 6.8GB partition, exclusivly for that usage) it tells me there ws no installation media found and the search path got automagically adjusted to /imges/image.img.And ideas howto fix that? Or how to install fedora from harddisk (without big fuss)?
View 2 Replies
View Related
Aug 2, 2010
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
View 9 Replies
View Related
May 28, 2010
I am running Ubuntu 10.04 LTS as a dual boot with WinXP but I am having problems with drive recognition in Ubuntu. I have four internal hard drives, 1 and 2 are standard master and slave and 3 & 4 are on a RAID card. Windows recognises them all okay every time but I have found through a lot of trial and error that Ubuntu will sometimes mount the drives in the order 1,2,3,4 and sometimes it will mount them in the order 3,4,1,2. No matter how I arrange the fstab file, it only works some of the time. If I load my music library into Banshee when the drives are mounted 1,2,3,4 then the next time I boot, if they are mounted 3,4,1,2 it can no longer find my music library etc.Is there a way to make Ubuntu recognise the drives in the same order every time?
View 3 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Apr 4, 2010
I'm about to install Ubuntu on two 250-gigabyte hard drives in a RAID 1 array, but I'm confused about how to partition my hard drives. How much space should I give to each partition? How many partitions should I create and where should I mount them? (I should mention that Ubuntu will be the only OS on this array.)
View 3 Replies
View Related
Mar 3, 2010
I have recently added 2 500GB sata drives to my machine. I have a Supermicro X6 mobo (yes its rather old) and the Bios recognizes the drives as Master 2 and Master 3 ide , but the linux will not recognize the drives. The system is running RH8 kernel 2.4.31 and i dont have the option of upgrading the kernel at the moment. Is there any way to get the linux to recognize the drives?
View 8 Replies
View Related
May 16, 2010
i just installed 10.04 and everything works fine except that it does not recognize my external cd/dvd rom and my usb flash drives, I already found some threads related to this and they that talk about going to config editor and activating these options: media_auto_run and automount_open.
View 9 Replies
View Related
Sep 23, 2011
I have a home samba server with a 3ware Escalade 8506-8. I have 5 x 500 gig hard drives in a RAID 5 array. Recently, my 8506 died and I need to get a new one. However, I saw a 3ware Escalade 9500S-12 on ebay for about $20.00 dollars more than a replacement 8506-8.
My question is, if I put my drives on the 9500S, will it recognize my existing RAID array? Or will it want to build a new RAID array and format all of my data?Hope I have asked this question clearly, little short on sleep this week.
View 3 Replies
View Related
Aug 3, 2010
I recently migrated from OpenSuse 11.2 to 11.3 after doing a fresh install. I have both Firefox as well as Java installed on my system, however, Firefox fails to recognize Java. I cannot see it in the Plugins list but I know Java has been installed successfully.Moreover, I have followed the instructions mentioned at:How do I download and install Java for my Linux computer ?but I was unsuccessful.I have followed the instructions at:SDB:Installing Sun's Java on openSUSE - openSUSEto create a symbolic link, but it still doesn't work.This is so frustrating... I was able to get Java working with Firefox on 11.2 but something is going wrong when I am trying to get it working with 11.3!
View 9 Replies
View Related