I have an Acer laptop, on which a I have Ubuntu installed with no disk partitioning. I may need to install Windows 7 on this machine but have no desire to stop using Ubuntu for normal use. Is it possible to create a partition to install Windows on, without changing my Ubuntu set up? Also, whilst I'm at it, I'd like to create a third partition for general data storage.
View 9 Replies
I want to install Windows 7 on a separate drive on my PC that already has Ubuntu. I was wondering if anybody had any tips on how best to go about this? I was going to install a new empty drive, removing the current one, then put the current drive back once Windows had been installed. However, I'm not entirely sure if this will work, since Linux currently runs from the first drive: Will it be confused by making its drive the second drive (these will both be SATA drives, BTW), and how would I get Linux to run? Could I change which drive to boot from in the BIOS, or would replacing the MBR to provide a boot loader menu be easier?
View 15 Replies View Relatedi currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
View 5 Replies View RelatedI have a duo core HP machine with two (2) physical hard drives.Drive C has the win Vista Media center version installed.The second drive has 2 partitions of 500gb each.One has all my windows data files on it and the second partition I have reserverd for the installation of Linux.How to install Linux on the second partition (SDB1) without loosing the ability to use windows when i need.In other words i want to establish a dual boot system and not disturb the existing windows installation by installing Linux and then be able to boot into a dual boot system that will let me select which OS to boot to.
View 3 Replies View RelatedI have been using gFTP to transfer files to/from a windows machine, but have run into a problem and wanted to try FileZilla. Using YasT (Package Search) I found and selected "filezilla - A GUI FTP and SFTP Client", and proceeded to attempt to install it. The outcome is:
Attempting to install FileZilla under YasT:
Download failed: File '/repodata/repomd.xml' not found on medium url.
I have several (say, 50) machines running ubuntu.I want them to be centrally controlled.That is, each machine should get permit from central machine before installing any software etc.I googled quite a lot but could not find the solution...
View 1 Replies View RelatedI try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedI remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
Right now I just installed open ssh because i was told its a great thing to have for remote controlling my machine if I am at work on my windows system. My question is, how on earth do I acess my machine from my windows machine now that its installed? i did sudo apt-get ssh and thats about all so far...
View 5 Replies View RelatedI need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedI want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies View RelatedI had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies View RelatedI have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View RelatedSo I am trying to learn a little about Cygwin and rsync. I'd like to rsync some data from a Windows machine to a Linux machine. I've got Cygwin installed but I can't figure out how to tell Cygwin were rsync will be pulling the data from; basically, how to set the directories that I want to be rsnyc'd. I've googled and googled but I can't seem to find the answer to this exact question.
View 4 Replies View RelatedI currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies View RelatedMy goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies View RelatedIs it sensible to install a netbook edition on an ordinary machine? Like if i want to quickly browse the web and answer emails with fast boot time and without having a full-blown desktop?
View 3 Replies View RelatedI had a good copy of ubuntu on a disk but i lost it in the move, lately i decided that i wanted 2 OS's on 1 machine windows vista/Ubuntu x32. I've already got VMware workstation 7, now the great feat i'm trying to accomplish is getting this .iso of Ubuntu into my VM machine, I've got Daemon tools lite and magic-iso and magic disk. But i'm not too sure which 1 to use.
View 7 Replies View Relatedmy lappy is 64bit...But I dont remember, So far I am using 32bit ubuntu. So How can I know if my computer is 64bit machine? if it is, Installing ubuntu 9.10 64bit will give any performance fetch??I guess 64bit ubuntu and 32bit are same interms of functionality and look Right? may be performance difference? give me some info...
View 5 Replies View RelatedI am a total noob, don't know anything about installing tar based software into my Ubuntu 10.4 set up (a Dell desktop previously running XP). I want to install a driver for my Lexmark Impact s305 multipurpose machine, using the driver the Lexmark site recommended, but have been completely unsuccessful.
Here's the software by name. lexmark-inkjet-legacy-1.0-1.i386.deb.sh.tar.gz. I extracted after right clicking on the icon, and that produced this file: lexmark-inkjet-legacy-1.0-1.i386.deb.sh. I launched that, got past the license agreement, and came up to a screen that said I needed root privileges and asked for an "administrative password."
I only have one password and entered that. It always works installing software via Synaptic or the Ubuntu Software Center, and everywhere else. Nevertheless, in trying to install this driver, I got this error message: "incorrect password." I have been unable to get around this despite repeated efforts. The installer software simply won't accept my password and so it won't install the driver.
In researching the issue, I have seen other people complain of the same problem. Given that I am a noob at this, have I missed something critical to the install? Does the software just not work (I have heard Lexmark is not too keen on Linux)?
I've assembled a new computer to replace a dead Xp/Debian dual boot machine. I have been persuaded to go for Ubuntu as a Linux-only box, running Win7 as a virtual machine. I had some help setting it up with two discs in a Raid1 array, and it works pretty well. One of those discs is, I notice, set up as bootable.
But.... it is causing a major headache in respect of USB when emulating windows. I cannot use devices such as my USB printer at present, and I have an urgent task which requires printing capability and Windows. I have spent time trying to sort the USB problem without success and have decided to take an alternative route for the present.
I have purchased two extra discs which are not included in the Raid array, with the intention of using one of them for a Win7 installation, making the machine dual-boot for now. Eventually the intention is to revert to Linux only with a 4-disc Raid.
And don't know how to proceed. I formatted one of the new discs to NTFS using Ubuntu's Disc Utility, and tried to install Win7 on that disc. I get a warning that Windows cannot find a suitable disc on which to install. I've tried with XP as well, and this copies all its files before proudly announcing that there is no suitable disc space on this machine. Two new 1Tb discs and no space!
I have recently started using Ubuntu, i need help in installing the sify broad band client on my machine.
1) Where can i get the software for installing the client?
2) How do i install the client once i have installed the software?
I'm trying to install on a machine that has a CD drive but no DVD (and is currently running 10.3). Following the procedure here I created a filesystem on the server and copied the DVD ISO to that. I boot with the network install CD and in the boot options I put in
install=hd:/dev/sda7/openSUSE-11.2-i586.iso
But then I get a red error diag saying
Could not find the openSUSE respository
Activating manual setup program
I go into the manual setup program, select hard disk, sda7, the iso file appears in the "Enter the source directory." dialog so I click OK. It does the "Loading the installation system" (or something, it's quick) and then errors with "No repository found". I have also tried sharing the iso file from a windows server and using network SMB but that didn't work. Tried mounting the install DVD (that I have used successfully before) on the windows machine, sharing it, and point the manual SMB install at that. Everything gives me "No repository found." I could use the Network CD to do an Internet install, but that seems unnecessarily slow and wasteful of bandwidth when I've already downloaded the DVD iso.
Can I do a fresh install of CentOS Linux on a remote machine? I have a machine with Windows NT in a remote location. Now I want to use that system as my deployment machine. To proceed with my plan I need to install a Linux OS (have chosen CentOS). The guy there with the machine is not very knowledgeable of the installation process of any OS. So I thought I could install CentOS remotely.how I can achieve this?
View 2 Replies View RelatedI am facing the below problem while installing ClearCase 7.1 in a redhat 5.4 machine.Error during "post-install configure" phase:
Error executing "/opt/IBM/RationalSDLC/clearcase/etc/clearcase" operation (status=50).
See agent output log for more information: /var/ibm/InstallationManager/logs/native/20110519_0846.log
Install:
[code]....
I want to install ubuntu server and redhat server on a machine. How to do it.
View 2 Replies View Relatedi have a linux mechine, in that i want to install solaris throug xen virtualization. (solaris content is in CD) while i am doing this there is an option "local install media" in installation method it was not highlighting so i can't install this. then what can i do now.
View 1 Replies View RelatedHaving trouble getting a certain piece of software to run under wine 1.2.2 and under Crossover, so thought I'd try wine 1.3.2. Wasn't sure if I could install it without messing with my 1.2.2 install. Would it work? using slackware64 13.37 multilib
View 1 Replies View Related
