Ubuntu :: Installed, Lost Windows Install?
May 5, 2010
Tonight I decided I would install Ubuntu on my laptop, which also has windows 7 installed on it.I have two hard drives in the laptop, one 160GB in the "primary" bay and a 320GB in the "secondary" bay. My partioning got a bit screwed up when in installed windows (mostly because of laziness on my part) and the Ubuntu install just made the mess even bigger. The way it was setup before the Ubuntu install was this:Windows has a 55GB partition on the 320GB drive (yeah for some reason i am booting from the secondary drive, hence the quotes).This partition is bootable.
Following the windows partition is a 255GB storage partion, NTFSThere was 37GB of unused space at the beginning of the 160GB driveThere is a 122GB storage partition, NTFSBoth dives have a 49MB dell utility partition, FATAs you can probably tell, I really butchered the partitioning when installing windows.I took the 37GB partition on the first disk and split it into a 33GB partition for Ubuntu and a 4ish GB partition for the swapfile.After Ubuntu was installed it worked fine, but I cannot see the windows install in GRUB.This brings me to my question: How can I make GRUB see my windows install that is on a separate hard drive than the Ubuntu install?I know I could resolve the issue by wiping everything and doing it properly, but I really dont want to have to do this if there is an easy fix that will let me boot windows again.All of the windows files and whatnot are still there because I can see them from inside Ubuntu.
View 6 Replies
ADVERTISEMENT
Mar 13, 2011
I have installed Oracle Enterprise linux and lost Windows Vista. It is I think still there - I can see it if I use a live Debian CD.
However when I turn on my PC I can not see a grub menu - even though I have created one :-
Code:
View 12 Replies
View Related
Jul 19, 2011
I had windows 7 and centos 5.5 dual boot earlier working fine.Today I had to format the windows partition and reinstall windows 7. Now I cannot access to my earlier CentOS partition.I need to access it without loosing anything on it. I tried with EasyBCD at Windows but it didn't help.Also tried to get files using an Ubuntu live CD but there that partition shows as LVM.What else I can do to boot CentOS again?
View 2 Replies
View Related
Jan 4, 2010
Lost Windows 7 Bootmanager after Fedora. Need to Boot Windows 7 but am at a loss of where to begin. I simply want to use a Boot Manager (BM), any BM to boot either Win7 or Fedora at will. I can now only boot Fedora. I have read for 2 days and nothing is very straightforward or clear as to the problem and how to recover Win7. Everyone seems to be talking around the problem as if its a trade secret. I am not the enemy. I will try to write a simple straight forward post to assist others who wind up in this dilemma. Below is, both, a copy of my dirve's layout and my current Grub configuration.
Fedora 12 boots fine. Windows7 is NOT in the GRUB menu.
fdisk -lu shows:
# fdisk -lu
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x2afbc966
[Code]...
View 8 Replies
View Related
May 25, 2011
I was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.
View 9 Replies
View Related
Dec 5, 2009
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
View 9 Replies
View Related
May 26, 2010
I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?
View 2 Replies
View Related
Feb 9, 2011
I downloaded Ubuntu 10.10.
I extracted the iso file.
2] I made a bootable cd out of the extracted data.
3] Now the CD does not boot
I have windows xp installed on C drive and wanted to install it on D.
View 1 Replies
View Related
Jan 2, 2010
how to install windows 7 basic recovery when ubuntu is installed as the os
View 1 Replies
View Related
Jan 14, 2011
I just installed Ubuntu 10.10 64bit using Wubi. I had 32 bit installed in a Virtual machine on Windows but I wanted to install it to my harddrive (and wubi was easiest). I'm trying to install Cinelerra following the instructions at:http://cinelerra.org/docs/cinelerra_..._en.html#SEC13Once I get to:autoreconf -i --forceit gives a few errors. Here's a copy and paste from the terminal:Quote:
lee@ubuntu:~/hvirtual$ autoreconf -i --force
Can't exec "libtoolize": No such file or directory at /usr/bin/autoreconf line 196.
Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf line 196.
[code]....
View 9 Replies
View Related
Apr 28, 2010
I am trying to install openSuse 11.2 on my laptop which has Windows Vista installed. I don't want to delete my Windows Vista that is installed. provide instructions on how to do this?
View 3 Replies
View Related
Jun 12, 2010
My desktop computer has 2 hardrives, one 70gb and one 40gb, previously, the 40gb was windows XP and the 70gb was a backup, I decided to install opensuse on the 70gb backup, and now I want to wipe out the 40gb HDD that has windows xp and turn that into a back up.
View 9 Replies
View Related
Jul 29, 2011
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies
View Related
Sep 6, 2010
I've been running Jaunty on my drive D: with XP Professional on a separate partition. Today I formatted a different drive, C:, which had previously shown up in GRUB as XP Home Edition, and placed a new XP Professional on it.
Now when both HDs are connected, C: boots without GRUB starting, and when I disconnect C:, the GRUB on D: starts, but cannot find the XP Professional NTDLR. I don't want to take up too much of anyone's time here with this; I'm mostly just curious as to what may have happened?
View 9 Replies
View Related
Feb 22, 2010
I've installed up a copy of Kubuntu 9.10. I want to use it to play eve online and replace my copy of windows. So far I have managed to get it installed, got the video drivers and wine sorted, and got eve online to work with wine. I'm quite happy with myself up until odd things started to happen. Basically, I want to recompile my Nvidia driver to a newer version, I know how to do this, I need to press ctrl alt F1 to drop to terminal, kill kde and then install the driver, i've done it before without issue. However this time around something is wrong. I press ctrl alt F1 and the black terminal window pops up... but I have no option to log in, same for terminals 2 - 6.
I did this, and sure enough none of my tty processes are showing, i've basically lost my terminals , as far as my limited experience goes, getty is responsible for the terminals right? How do I reinstate my terminals and get to a point I can kill kde and get back to shell? I have no idea what i've done to get in this state. Also, as a side question, before all got screwed up and i did manage to launch eve online, I could run one client perfectly. However with 2 clients things got all choppy and laggy? why is this? I can run 2 quite happily under windows 7
View 1 Replies
View Related
Sep 12, 2010
I just installed an nVidia driver for my Dell laptop running the latest flavor of Ubuntu (Lazy Lynx, or whatever it's up to). After it rebooted, the screen came up black. I have no video. How do I get rid of this driver and get my video back?
View 11 Replies
View Related
Jun 21, 2010
I want to know about grub. Let start with the explanation of grub. I am using Ubuntu 10.04. Yesterday when I installed widows7, I lost my grub. Every time I tried to install windows running on Ubuntu machine, the grub is lost. Why is it so? How can I restore it (for Ubuntu 10.04)? Can any advance setup be made while installing windows, so that the grub is not lost?
View 3 Replies
View Related
Jan 24, 2010
I was trying to install a new hard drive and in the process have managed to not only format my old hard drive but lost all my stuff as well. I am running a live CD but unable to mount the said hard drive. I Know its there.
fdisk tells me:
As you can see its still registering as /dev/sda, I am unable to mount this to run a undelete program on it.
a e2fsck tells me
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>
View 4 Replies
View Related
Jun 6, 2010
I installed a clean installation of ubuntu 10.04 inside Windows 7 and wireless worked normally in the beginning that I downloaded and installed all the updates "I selected without updating Grub".On the first reboot after updates, the wireless icon disappeared from the panel and could not connect to the internet although the settings in the Networking tools were correct.
View 1 Replies
View Related
Sep 17, 2010
I installed flash player for my daughter and lost all my icons. I did " sudo gnome - panel restart and got them back , All but the wireless icon and I do not have a clue how to get it back. I also need to know how to get my pc to see the ubuntu os on the same network and how to view its traffic as part to police what my daughter is doing.
View 1 Replies
View Related
Sep 19, 2009
I had Kubuntu 8.10 with KDE 4.0 interface and i decided to try out fedora to see if i liked it and wanted to eventually switch. i've done so many dual boot systems with Kubuntu and not had any problems that i decided not to back up my system this time before running the installation. after running the installation and shrinking my hard drive (200 gb) by 80 gigs, i rebooted to find that Kubuntu was no longer bootable. the first time i booted into fedora, disk utility popped up with a message that said "1 or more hard drives is failing". i ran the test that it recommended and found no problems. then i ran the longer test and still found no problems. i've rebooted a few times and have not been able to see Kubuntu in the boot loader options. if you need any more information i will be happy to provide it. my question, obviously, is how can i retrieve my Kubuntu partition. it is still there but is not bootable.
View 9 Replies
View Related
Dec 24, 2010
I installed Mepis to a separate partion (shares swap) and now the option to use, originally installed, Ubuntu does not appear at start up. Is there a way get this option back?
View 6 Replies
View Related
Dec 19, 2010
In other words, I somehow deleted the first partition of Windows7, the windows reserved system partition. WHat is the quickest way I can rescue this system? Client has been waiting for her machine a long time already, I have to delived today, no time to re-install windows7.
View 4 Replies
View Related
Jul 28, 2011
I have a PC, with 1 HD of 500GB and the following partitions:
Windows XP - NTFS 50 GB
Windows 7 - NTFS 350 GB
Linux Ubuntu - 98 GB
Linux swap - 2GB
The last OS that I have installed was Windows 7, and each time, when I started up my PC, I saw GRUB first, and after choosing the option to load windows, the Windows loader giving me 2 options, one for Windows 7 and one for Windows XP. I didn't like to see first GRUB and after that the windows loader, it was redundant, but everything was working well. One day, I decided to mix the windows 7 and the windows XP partitions (deleting the windows XP and resizing windows 7). I tried to do that with the Windows 7 utility included in the control panel but I couldn't. It said that I couldn't delete the active partition or something like that. It was not possible to delete the partition in which WinXP was stored.
Then, I decided to boot with Ubuntu and use the partitioning tool that comes with it to delete the WinXP partition. It was possible to delete the partition, and I also putted the option "bootable" on the 350GB Windows 7 partition. After that, I rebooted and it was not possible to load windows. Then I tried changing in GRUB the entry for Windows, because I thought if I could put the correct partition to load from, it wouldn't be more problems. I tried several times but I couldn't load windows, so I putted the Windows 7 DVD and I started the installation process, waiting to see an option saying that there was already a system in the partition of 350GB, and allowing me to fix the mbr in that partition.
My surprise was when I choose the partition of 350GB and the installation process began. I was afraid of to lose my data then I decided to reset the computer! And now, all my 350GB disk is gone! I can't see the partition when I enter with Ubuntu. I'm really worried about this, because the computer detects the 350GB partition as empty, and I don't know what to do! I turned off the computer and now I am using another to write this. I have all my files and important information in that partition! and It seems it's lost. I hope it's still possible to restore the partition. Actually I don't care if I have to install again my operating systems but I need my information!
View 5 Replies
View Related
Jan 8, 2010
At one point, I thought I needed pulseaudio for sound, so I messed around with installing it, even though at the time I had ALSA installed. (suffice to say, I know very little about linux sound). Pulseaudio never did work, I removed it with aptitude. But now ALSA seems to reach to pulseaudio for some reason.
Code:
More confusing is that there are no "alsa" looking processes in ps -A. But apparently, the basics are there
Code:
There's only one thing in init.d that seems relevent to alsa:
Code:
But doing this does not help anything. Does anyone know what to do from here?
And because I'm curious, how come I get sound from Flash Player and Audacity with no problem?
View 9 Replies
View Related
May 9, 2011
Hi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :
Output of uname -r
2.6.38-bpo.2-amd64
Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?
Output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]....
View 4 Replies
View Related
Jun 16, 2011
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
View 2 Replies
View Related
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
May 28, 2010
following is my fdisk:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xed73ed73
[Code]...
View 3 Replies
View Related
Aug 21, 2011
Suddenly, my windows have no borders, and I have little control of them -- no moving, minimizing, or maximizing. I can't access these functions because there is no bar at the top, but they also don't respond to pressing the Alt key. My mouse cursor is the generic "X" that XWindows starts with.
The obvious solution is to change my settings, but I can't: when I try to open window manager settings, the disk spins a little but nothing shows up.
Another solution would be to try a different window manager, but this fails on a different problem that I have been having for some time. If I log out and then click on my user name to log back in, nothing happens -- I do not get a password box, just the same user selector that I started with. I use Xfce and I don't know how to switch.
View 1 Replies
View Related
