I'm upgrading from an AMD XP 2300 chip on an ECS motherboard to a intel i5 chip on a ASUS motherboard. I was wondering if I will encounter any problems or if the system will work right away without reinstallation.
View 2 RepliesI upgraded the wireless card in my laptop (sony VAIO CW) due to the original Atheros being incurably slow.The new card is an Intel 6300 ultimate n. In Windows 7, after installing the relevant drivers everything worked without a hitch.In my Ubuntu 10.04 installation, however, I have been unable to get it working.Initially I had the compat-wireless modules installed (linux-backports-modules-wireless-generic), as I had done so to try and get the Atheros card working better. I tried removing all of these, and that made the difference that iwconfig now (instead of nothing) listed
Code:
wlan1 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm
[code]....
I have recently installed Ubuntu 10.04.1 lts server on my Intel "fakeraid" (software raid) (2x250 sata).To test my RAID 1 I turned off one HD and start the system.The first screen (Intel software screen) show Status = Degraded, but the system starts normally with just one HD.Then I turned off the system and turned on the HD again, so the first screen (Intel software screen) shows Status = Rebuild. If I enter in the software raid panel the folowing message is showed: "Volumes with "Rebuild" status will be rebuilt within the operating system"The system starts normally... but this message status stays permanently even I restart the system again
View 9 Replies View RelatedI was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies View RelatedI am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies View Relatedi upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
View 9 Replies View RelatedI have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies View Related! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I've just installed 8.04. and I was googling on the net and saw that there's a more new version 9.10 is it? So I tried following the guide on [url]
View 6 Replies View RelatedI'm trying to do the upgrade but get the following error:
Quote:
root@server:~# do-release-upgrade
Checking for a new ubuntu release
Done Upgrade tool
Done Upgrade tool signature
Done downloading
[Code]....
I've had the 10.04 installed on a notebook for about a week now and I want to upgrade to the LTS that was released today. When I go to check updates it shows me that everything is already updated. How can this be? Is there another way to upgrade from RC to LTS that I don't know about?
View 5 Replies View RelatedInstalled 7.04 on a toshiba satellite M115 Laptop. I want to upgrade to 10.04. Made a boot disk and tried to launch but 7.04 always opens. How can I get this upgrade done?
View 9 Replies View RelatedI am upgrading to Ubuntu 10.10 Alpha 1. This is on my gaming machine so I can test it and if it screws my system up, I can reinstall. I have not seen any issues so far. I think there might be a thread already open for talking about 10.10 but I am creating this thread anyways.
The upgrade is going faster than when i first did the upgrade earlier this month.I am testing Ubuntu 10.10 on a computer with a 1.6Ghz AMD 64 processor.It has 3 GB ram and a 500GB hard drive. 128 MB video ram.
Note: This is The emachines EL 1200-06w I am using a Belkin wireless card which is only able to be used with the help of Windows Wireless Drivers (ndiswrapper).
I plan to report bugs in launchpad. Last time, Ubuntu could not start after an update. Now, I am risking down time by using the Alpha version again. I am installing by going to: Applications -> Accessories -> Terminal In Terminal, I enter in
Code:
sudo update-manager -d and then it asks for a password to open update manager. Then it shows the upgrade is available. I am still at the process of upgrading the computer. I am running Ubunut 10.04 32 bit at the moment.
UPDATE: I didn't need ndiswrapper, and I am able to now use Natty, where it works as it should.
Recently I wanted to install Ubuntu 10.04 from a CD which I had sent to me, but which I never actually used. So I put the CD in my laptop, used Wubi to install Lucid Lynx next to Windows in dual-boot, and restarted the laptop. Everything was OK. I noticed that the Update Manager didn't come up yet. I glanced at the notification area, and I wasn't connected to the Internet. So I entered wireless connection password and so Internet was back.I then opened Update Manager, changed release options to "Normal Releases" and was told of upgrade to Ubuntu 10.10. So I pressed the button, successfully updated and restarted. BUT, when Ubuntu tried to reboot, it gave a whole list of errors, and proceeded to shut down. Right now I'm manually downloading 10.10 64-bit, and Wubi. And I uninstalled previous installation. If this works, then great. But I still want to know, just out of interest, why the hell did it do that? Is there issues with the upgrade? Was there errors in my Ubuntu installation?
View 1 Replies View RelatedI have perfectly working Ubuntu 10.04 on my Dell Vostro 1500 laptop. But, yesterday I upgraded it to Ubuntu 10.10. There were various error messages during upgrade process, but it showed that I can continue without certain package. But, after restarting the laptop, I didn't found the new kernel entry in the GRUB. So, I continued with booting using older kernel version. It showed that ubuntu is booting but after sometime screen went totally blank. I even tried to boot into recovery mode, but faced same problem.
Then I booted with live CD, and chroot to the root folder of ubuntu on my HDD. After running command "dpkg --configure -a" I got error messages which are stored in attached file error-msg.txt.I cannot format the linux partition for a clean install. Please suggest solution for either recovery of 10.10 or restoration of 10.04.
I currently have Ubuntu 9.04 Installed and everything works perfectly. Its no longer allowing me to do the automatic updates saying my distribution version isnt supported anymore, and want to upgrade to 10.10.
When version 9.10 came out I upgraded through the Update Manager, and it screwed up the install and nothing worked. I ended up deleting everything and started from scratch. I dont want to go through that again.
I was wondering the easiest way to upgrade to version 10.10, because even the Update Manager only gives me the option to upgrade to version 9.10
I have an acer emachines netbook and I am looking to upgrade from 9.10.
View 3 Replies View RelatedI have what it may seem to most of you a nooby question but it is the first time for me that a new version of Ubuntu comes out, so I want to know if I will have to do a new "clean" installation of 11.04 when it's released or will it be some sort of upgrade from software center. If I have to do a new installation is there a way to reinstall all the programs I have all at once or maybe take a backup of them or will I have to install them all one by one?
View 3 Replies View RelatedI am trying to upgrade from 10.10 to 11.04 and I have Failed to Fetch error. I tried to change Download Server but it didn't help.
View 1 Replies View RelatedI found no similar threads so I created a new one.
I have w7 and ubuntu on a dual boot arrange. I need them both and I need ubuntu to see my files in c:.
Life was fine before the upgrade, but now I just can't see my c: drive.
Is it possible to accomplish this? Or do I have to install each subsequent version until I reach 11.1? When I run the update manager it never informs me of a new release.
View 7 Replies View RelatedI'm trying to figure out how to install Ubuntu on top of Windows 7 on my intel X-25 M G2 SSD. I bought the SSD a while ago and installed Win 7 without partitioning it. Soon, I got sick of worrying about the wear and tear, and chucked it into my drawer. Instead, I installed Ubuntu on my HDD, and forgot about the SSD. Now that I need to dual-boot because of some obscure VM-bashing ActiveX plugins,
I need to install Ubuntu on my SSD. However, I'm overwhelmed and confused. I just have no idea how to do just that. What steps should I take to install Ubuntu without messing up Win 7 on my SSD? I need general pointers like align your drive, manually partition for ubuntu, and the like. I think I can plough thorough howtos and find out necessary details. I've been searching, but my effort was fruitless mainly because I didn't know what was involved.
While upgrading from 9.04 to 9.10 using Alternate CD, the OS crashed. I had updated the 9.04 with latest updates and then started the upgradation to 9.10 using a Alternate CD. But after some time, the computer resarted and the screen displayed six line of 9.04 startup line. I waited for ten minutes but nothing happned.
What can be the reason and what should be done in that situation.
I wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
I'll probably be taking my netbook up to Lucid here in a few days. My question is if I should bother with the Netbook Edition or just get the standard edition? Are there any packages in the netbook edition that can help with processing, power, etc on a netbook? More importantly, can the special netbook desktop be turned off in favor of the standard UI?
View 9 Replies View Related