Ubuntu Installation :: Unified Way Of Booting Os's?
Dec 7, 2010
I want to set up a system with two windows oses.
a) Windows 7
b) Windows XP
Windows 7 will be installed to one partition, and xp will be restored to a second partion from a ghosted image. I don't want the headache of having to guess who or what is fighting to control the boot sector. When the fight is over I simply want to walk up stick in a cd run a utility and install a booter/loader over what ever is there. I want to be able to do it adhocly so it must be able to on install always scan for any already installed OSes and set them up in a nice selection menu at boot.
GRUB 2.0 came to mind. What I want to know is if that sort of thing is possible. Can I install/restore multiple OSes to a disk, and then when all is done pop in a live CD and install/repair GRUB 2 to the system? Even if UBUNTU or any linux is not on the system and have it perform the above scenario as described?
View 4 Replies
ADVERTISEMENT
Sep 5, 2010
I'm currently working on telling my Ubuntu Laptop to do everything I'm able to do with my MacBook. Not so much the look (I love Ubuntu's look) but the functionality.I somehow can't seem to get a unified inbox in Evolution. I got 6 IMAP accounts each with a separate inbox which is quite annoying. I've gotten used to Apple's Mail.app and I'm missing that option in Ubuntu.The only thing that COULD be a unified inbox would be "On this Computer" but I don't see any option to integrate my accounts to it.
View 4 Replies
View Related
Jun 22, 2011
I just attemted the install for the Radeon unified drivers. Im running Ubuntu 10.04 with a X1200 series graphics card. 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] The setup seemed to go fine and I restarted as it suggested. but now when I attempt to open the new catalist control center application it gives me a message about not detecting any Radeon components or I need to configure them. Sadly this message isnt copy/pasteable.
View 4 Replies
View Related
Mar 24, 2010
Running this software:
Linux 2.6 on a hacked LaCie NetworkSpace
installed SSHd 5.4
installed Samba 3.4
installed lighttpd 1.4
installed ProFTPD 1.3
I want:
Login with my account and same password on all of those. When i use passwd, the change should be reflected on all of them.
I have:
Samba uses encrypted passwords, and i must change passwords for samba with smbpasswd.
lighttpd uses separate password file, must change by hand.
ProFTPD and SSH use system login (/etc/shadow).
So far i found two possible solutions, but can't tell if i understood them right or how to achieve them: use LDAP as auth backend If i could make LDAP my auth backend, provided this is possible at all, lighttpd would use this directly, and PAM would use it for system login. Nevertheless, actually this can't work as Samba uses encrypted passwords. Correct? use Samba password backend, then make LDAP use that If passwd, login, etc would use Samba, i would work everywhere with MD4 hashed stuff. Lighttpd would send plain passwords (HTTP basic auth), and query LDAP, which in turn makes an MD4 hash, and tests for Sambas passwd. Will this work?
View 1 Replies
View Related
Jan 29, 2010
I just joined a research group that is about to embark on writing a big multi-physics code package. Before the programming gets so big it is unmanageable, I was thinking about best practices and similar things. In that process, I came across something called the "Unified Modeling Language" (UML). Also, looking at a, cross platform, free, tool, that is good for C++. Ideally with reverse engineering and code generation. I came across Bouml, found ArgoUML. The former seems to support forward and reverse C++, the latter doesn't. Also, it seems that Visual Paradigm has a "Community Edition" that is free for non-commercial use. Then there are more on the Wikipedia page. I would like to hear from users what they like and don't like. Looking for reviews here.
View 2 Replies
View Related
Jul 21, 2010
I need a tool to convert lots of C codes to a unified coding style. What tool can I use in Linux ?
View 1 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Feb 19, 2011
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
View 5 Replies
View Related
Sep 13, 2010
I've just finished booting my system via Live CD, and installing 10.04-1 to existing partitions on a hardware RAID. The install went fine but when I rebooted I didn't get past the BIOS output screens.I used four existing partitions for the install: /home (MyRAID3, which was kept as-is), / (MyRAID2, which was reformatted) , /boot (MyRAID1, also reformatted) and swap.
View 9 Replies
View Related
Oct 16, 2010
I updated from 10.04 to 10.10. Ubuntu works fine, but Vista does not boot anymore. If i select it from the GRUB menu the Pc just go silent and does nothing till I press Ctrl+Alt+Canc.
Here is my fdisk -l
Code:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
code....
View 8 Replies
View Related
Nov 20, 2009
I downloaded the minimal boot image and installation CDs for F12 i386. On booting either I get the following messages:
Code:
This kernel requires the following features not present on the CPU:
cmov
Unable to boot - please use a kernel appropriate for your CPU
Looks to me like the installation media for i386 doesn't have an i386 kernel! I'm trying to install to an i586 CPU.
View 6 Replies
View Related
Jun 17, 2009
I try to install Fedora 11 from DVD BUT after installation system is not booting. Windows XP is a 1st OS is already installed in my system.
View 1 Replies
View Related
Jul 28, 2010
I have downloaded the 10.04 desktop image of ubuntu & installed/unpacked it with Universal USB installer as it sujest on the official site onto my Sandisk 4gb usb flash drive. And now when i restart it doesnt boot...i've tried already setting bios to USB-FDD & USB-HDD as my primary boot device but still it just loads into windows....and btw in windows it reads the drive that means that the usb port is working correctly...so what is my problem? Or maybe I should install it on the usb using some other way.
View 2 Replies
View Related
May 5, 2011
I'm looking to run linux from a usb key without booting from it. Just plug it in and it starts from windows. I seem to recall something like this but can't find it. I found portable apps and portable ubuntu(site seems down) but nothing like I described
View 4 Replies
View Related
Feb 16, 2010
I have an old dell laptop that I want to put ubuntu on but it doesn't have a cd drive, I can't boot from a network, and the bios doesn't support a usbdrive. It does have a floppy drive and I wanted to know if there is a bootfloppy that allows me to boot from a usb?
View 2 Replies
View Related
Feb 17, 2010
Yet another "dual XP+Ubuntu" boot problem for everyone.
My neighbor wanted to try out Linux as he did not want to pay for Windows 7, so I offered to install Ubuntu as a dual boot. Ubuntu 9.10 boots and works fine, but now Windows XP will not boot. It just sits in a blank screen with flashing cursor after selecting Windows in Grub.
So, it is a Dell, originally with two partitions, one large one with Windows XP and a small one with HP's recovery partition. Here are my steps.
1. Using a Ubuntu 9.10 64-bit CD, I booted into a Live Ubuntu session.
2. Using GParted, I resized the Windows partition.
3. Installed / on the free space, did updates.
4. Delivered to neighbors house, showed them Ubuntu, and when I tried to restart into XP from Grub, I get a blank screen with flashing cursor.
I looked at the SuperGrubDisk and it seems to only work with Grub1, so I did not want to try as at least one OS boots and I did not want to risk messing up Ubuntu as well.
View 9 Replies
View Related
Mar 9, 2010
I've used Ubuntu for a couple of years now, and it is by far my favorite operating system. Although, I am now reluctantly switching to Windows 7, due to lack of support for the Apple Airport Extreme.
My CD drives are incapable of recognizing the DVD that I burned of Windows 7.
My only other option now seems to be to boot directly from the Windows 7 iso that I have.
I am using Ubuntu 9.10.
View 7 Replies
View Related
Mar 17, 2010
I'm a noob when it comes to this kind of stuff, so bear with me. Ok so my computer has 4 hard drives, a 640gb, 500gb, and two 320gbs. I have the larger two on a raid 0 array, which is also where I have windows installed. I installed Ubuntu on one of my spare 320gb drives, so that I wouldn't have to worry about partitioning. But now every time I boot my raid array in order to boot windows, grub will load and my computer will boot Ubuntu instead.
View 1 Replies
View Related
Mar 17, 2010
I have one hard drive and one operating system on that one drive. No dual boot, no raid, no windows, no usb boot. Just 9.10 installed on one 40 gb drive. After trying the various techniques from this forum, I'm now stuck at Grub loading, error, grub rescue prompt. No menu list to choose from or edit (e).Here is the output of 'sudo fdisk -l'
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 40.0 GB, 40000000000 bytes
[code]....
View 9 Replies
View Related
Apr 17, 2010
I am trying to install Ubuntu 9.10 on a laptop. The laptop does not have working cd-rom or an operating system installed. I was hoping to install via USB cd-rom. The bios is an old one and will not allow booting from USB. Does anyone know of a way for me to install?
View 2 Replies
View Related
Apr 26, 2010
I am running dual boot on ubuntu 9.1 with windows xp SP3 32 Bit. I would like to add another partition and install windows 7 64 Bit ( I know my hardware will handle it I checked). I don't know much about ubuntu and I was wondering will the bootloader automatically detect a new partition with win 7 x64 on it? Or if what I said made complete nonsense,How do I run Windows xp 32 bit, Ubuntu Fiesty 64bit( 32 bit mabey ) and Win 7 32 bit all on one pc?
View 2 Replies
View Related
Apr 30, 2010
I have installed 10.04 Netbook remix, installation went find and rebooted..Now all i get is a black screen after bios finished loading. I guess it is something with the bootloader
View 9 Replies
View Related
Jun 28, 2010
i have mistakenly deleted a partition to create space after uninstalling Ubuntu. now my computer says
GRUB loading.
error: no such partition
grub rescue>
i am a newbie and have no idea how to get to win 7
View 9 Replies
View Related
Jul 9, 2010
My installation went fine but minutes after login ubuntu just freezes up. I'll show my PC Configuration here.
OS NameMicrosoft Windows XP Professional
Version5.1.2600 Service Pack 3 Build 2600
OS ManufacturerMicrosoft Corporation
System NameLADYOFVELANKANN
[Code].....
on lot of searching I was told that there is an issue with Intel 82945G Chipset and advised me to take a graphic card.What can be done to avoid this. Even I tried to install Intel video driver ut it says it is installed by default. P.s: On BIOS setting I even changed my Video Memory from 128 to MAxDVMT but of no use.
View 1 Replies
View Related
Sep 6, 2010
I had Ubuntu 10.04 installed on my machine and I updated to 10.10. When the pc rebooted the following appears:Ubuntu Maverick (Developer Branch) "computer name here" tty1And it asks me for my username and password, after that is justs stays there, I've tried the startx command but with no luck
View 8 Replies
View Related
Sep 22, 2010
I created a bootable flash drive using Ubuntu's instructions on their netbook website. However, when I try to boot from USB after setting the BIOS accordingly, it still boots to windows. When I choose Boot Options Menu, which should just let me pick USB, only "Netbook Harddrive" is listed.
It seems that the USB actually isn't bootable or something. (Running Windows 7 Starter now)
View 1 Replies
View Related
Oct 3, 2010
I have installed ubuntu a week back and since then i am Loving it. I have a couple of quries.
1) Since the launch of ubuntu 10.10 is very near i suppose it is almost safe to upgrade to ubuntu 10.10. I had done the following to upgrade. update-manager -d and upgraded to 10.10. The system has failed to boot after that what should i do to safely upgrade the software. Is it required to uninstall all the drivers prior to the upgrading of the os?
2) How can we take backup of the data we have in ubuntu? for example pictures and music folders etc?
Now i have safe and superbly running 10.04 version. is it recommanded to upgrade to 10.10 now?
View 2 Replies
View Related
Oct 16, 2010
I have Win 7 in my hard drive (sda) and I installed Ubuntu 10.04 in other hard disk (a usb disk), but when I try to boot my pc from the usb disk (sdb), the grub shell is displayed. No menu is displayed. When I boot Windows 7 from sda, it runs correctly. The problem it's when i wanna boot Ubuntu. I ran bootscript on the live CD and this is what I've obtained:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for /boot/grub.
[Code].....
View 1 Replies
View Related
Oct 22, 2010
I have installed Ubuntu 10.10 in Dell Inspiron 1525 which was having Windows 7.Now when i select Windows entry in GRUB menu for booting the OS is not getting loaded instead it goes to the GRUB menu again. The same happened in my Home PC with Windows XP.Please tell what i have to do for fixing the error.
View 9 Replies
View Related
Nov 5, 2010
I have a micro-atx box with a CF reader that pretends it's an IDE HDD. You can boot off this thing and this is intended to be a "diskless" system. The vendor claims only 17 watts when at rest.My plan is that this will be a printer & backup server but the backup drive will be a USB drive that will only be turned on when needed so I want the box run without a HDD if possible.
My concern is the limited write cycle life of FLASH drives. I bought the best quality I could but I still want to preserve it as long as possible.I formatted it as ext2, for example, to stop the journeling writes of ext3 or ext4.Has anyone created a check list of configuration settings that will give the flash the longest life possible.
View 1 Replies
View Related
