W: Failed to fetch [URL] 404 Not Found [IP: 91.189.88.46 80]
W: Failed to fetch cdrom:[Ubuntu-Studio 10.10 _Maverick Meerkat_ - Release amd64 (2010100]/pool/main/p/pulseaudio/libpulse-browse0_0.9.22~0.9.21+stable-queue-32-g8478-0ubuntu21_amd64.deb
[code]....
I tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View RelatedI am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI installed 9.04 then tried to upgrade to 9.10 and it froze so I had to reboot. Since then I have not been able to re-install 9.04 or see my partition. Everytime I try to reinstall it says and shows that it can't find the partition like there isn't a hard drive installed.
View 3 Replies View RelatedSo today I decided I would upgrade my computer to 10.10 from 10.04. Everything was going great until after the restart. As the title suggests, when booting I get the message "error: the symbol 'grub_xputs' not found." and a grub rescue shell.From this shell, is there anyway that I can load Ubuntu so I can reinstall grub, or do whatever needs to be done? Unfortunately booting to a livecd does not seem to be much of an optiEDIT: After not finding anything I eventually gave up and took a dvd-rom drive out of another computer to get into the live cd and was able to solve the problem through there using kansasnoob's linked solution, so I guess my problem is solved, but only by changing the conditions of the problem.
View 6 Replies View RelatedDual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
I used pre upgrade command then executed the upgrade (it took more than 4 hours) and I had a success message at the end saying that I have now to reboot. But now I have no more Xorg working, and I had to boot from the live CD to mount the LVM disk to report this problem (thanks to the live CD).
Looking at the Xorg.0.log the reported error is:
(II) Primary Device is: PCI 01@00:00:0
The PCI device has a kernel module claiming it.
This driver cannot operate until it has been unloaded
(EE) No devices detected.
Fatal server error:
no screens found
How I must do now to get back Xorg? Check the log file at "/var/log/Xorg.0.log" for additional information. I tried to remove and re-install Xorg, without success. Then I installed kmod-nvidia and executed nvidia-xconfig. The log says that I have to configure the kernel without nvidiafb support, but I don't know how to do it, and even if it is a good idea. I noticed that if I remove the /etc/X11/xorg** files, I can use startx but no much more.
I'm a long time Linux user. Finally got around to upgrading my Fedora 11 system to Fedora 12 by using the 'preupgrade' tool. The upgrade appeared to go well (downloaded packages, rebooted into installer, etc). However, now that the upgrade is complete, I'm unable to boot my system.
Here's my configuration:
/dev/sda (80Gb)
200Mb /boot partition (ext3)
52Gb / partition (ext4 - managed as logical volume)
2Gb swap partition (managed as logical volume)
20Gb /spare partition (ext3 - managed as logical volume) .....
All worked fine under Fedora 11 for the last few months. Grub now presents me with 'Fedora' and 'Windows XP' boot options. The /boot/grub/menu.lst file is essentially the same as it was for Fedora 11, except for the different kernel versions, etc. The boot sequence shows the Fedora bubble (??) and gets about 80% full when the screen goes black and the message displayed is:
No root device found
Boot has failed, sleeping forever
If I boot Windows, all works fine.
Am able to boot using a SystemRescueCD disk. The disks all look okay and I can mount/modify all partitions, etc. The grub menu.lst file read as follows (sorry, typed in, not copied):
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.32.11-99.fc12.i686.PAE)
root (hd0,0) .....
After install I tried to add firefox but it wasn't found in any of the repositories. I thought it was supposed to be in there. Thunderbird also wasn't. What repositories do you guys add after install?
View 3 Replies View RelatedI have brought a virtuell server to get Magento ready. My server is debian with PHP Version 5.2.6-1+lenny3
For that i need Pear. I want to install it global so i tried this command "apt-get install php-pear". Following i get after this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
php5-cl
Suggested packages:
code....
1+lenny3_all.deb 404 Not Found
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
This is my sources.list:
deb url
deb url
deb url
last month i had ubuntu 9.04 on my pc but i formated and i install 9.10 then i formatted again with windows xp and now i want to install again the 9.10..but when i try to install at the boot ubuntu docent boot up also fedora(12),opensuse and ubuntu 9.10 but with ubuntu 9.04 everything is ok..i try to upgrade from 9.04 to 9.10 using update manager but when i restart my pc ubuntu doesn't boot up?
View 1 Replies View RelatedI cannot upgrade from 8.04. I go to the update manager, and it says everything is up-to-date. I've tried going in through terminal.
View 2 Replies View RelatedI'm currently trying to upgrade to 10.04, but I'm experiencing a problem. Currently I am encountering the following error message when trying to upgrade: "An unresolvable problem occurred while calculating the upgrade: The package 'ubuntu-desktop' is marked for removal but it is in the removal blacklist."
The message directed me to /var/log/dist-upgrade. I looked at the apt.log file and I discovered the following at the end of the file:
"Investigating ubuntu-desktop
Package ubuntu-desktop has broken Depends on libsdl1.2debian-pulseaudio
Considering libsdl1.2debian-pulseaudio 2 as a solution to ubuntu-desktop 0
[code]....
I downloaded Ubuntu 10.04 Alternate CD and tried to upgrade 8.04 to 10.04. When I run upgrade (with the option "Include latest updates from the Internet?" set to "No" ) in the "Setting new software channels" it gives this error (ScreenShot attached):
Code:
An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
I'm using Ubuntu 10.04 (upgraded from 9.10) and I can't find a way to upgrade to the new 10.04.1 version.
I've updated all the software sources, changed my country location to US, and even generated a new sources.list file, but my update manager never displays an option to make an upgrade to 10.04.1
Here are my current settings:
Code:
###### Ubuntu Main Repos
deb http://pt.archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse
###### Ubuntu Update Repos
deb http://pt.archive.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse
[Code].....
I have Ubuntu 10.04 and I am trying to upgrade to 10.10 but when I have the update manager check for updates it is not an option.
View 5 Replies View Relatedwhen I upgraded from 10.04 to 10.10 I lost the ability to enable effects, lost the ability to use compiz and my screen got messed up and my video card driver wasn't working forcing me to re-install it several times. Even now my system doesn't totally work how it used to in 10.04.I want to avoid that in this upgrade. I downloaded the live cd since the wire upgrade took a bunch of hours. But my concern is the graphics, I want to be able to use effects since Unity uses effects, I have unity 2d installed but it doesn't work. So somehow enabling effects is a must.
what steps do I take to make the upgrade process as smooth as possible, I've already done my app updates so my system is current, I'll disable 3rd party ppa's like before but what else? Do I have to disable my video card driver so the live cd video card driver can be installed? How do I keep my setting as is but allow for all the 11.04 goodness to be installed?Or is erasing my current Ubuntu partition and reinstalling 11.04 fresh the best option?
I am running Lucid Lynx on a Dell Inspiron 1720 laptop. Every time I try to upgrade to 11.10 (via the Update Manager) I get the below listed errors. Any suggestions are appreciated.
W:Failed to fetch http://astromirror.uchicago.edu/ubun...86/Packages.gz 404 Not Found
, W:Failed to fetch http://astromirror.uchicago.edu/ubun...86/Packages.gz 404 Not Found
, W:Failed to fetch http://astromirror.uchicago.edu/ubun...rce/Sources.gz 404 Not Found[code]....
Since 9.10 was available, I've been unable to upgrade to the next distribution. Today I actually took the time to copy down and make note of the error given. The pop-up error is this: Could not calculate the upgrade
[Code]...
I just upgraded to 10.04 from 9.10. Everything seemed to go well and it looks like everything transfered over fine except my email stuff. I was using Evolution with 9.10, but it looks like none of that is on 10.04. Not too worried about the program itself, but I would like to have kept my contacts info and a few of the emails from the last couple of days.
View 1 Replies View RelatedUpgrade from Karmic - was using EasyBCD in Vista. Tried upgrading to Grub2, reinstalling Grub - but can not boot to either. Here is my Results.txt file from [URL]
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
[code]....
I'm trying to upgrade Virtualbox but I get the following error. What can I do? I use Ubuntu Release 10.04 with Linux 2.6.32-24 generic.
View 4 Replies View RelatedI upgraded to 10.10, and grub just came back with "no wubildr", and then a "no other mode", or something like that. I dual boot xp (I used it to install wubi), and I need a few files off my linux partition. Is there a way to:recover my files within windows
skip grub and go strait to ubuntu
I have Ubuntu Mavrick installed on windows vista using wubi. it has been running smoothly since RC, when i installed it. now, after I updated using Update Manager last night I was asked to reboot. Upon rebooting i was not able to use ubuntu. the Ubuntu option is there on the windows boot menu but after i select it gruub does not appear. instead it reboots again. is there any way to fix this problem so i can use ubuntu again? if not how can i recover my ubuntu files and folders? Please help because i dont really want to reinstall after all the tweaking and stuff.
View 3 Replies View RelatedI started off on 9.10 and upgraded to 10.4 without any problems. However during the upgrade to 10.10 got asked about grub (see attachment 1& 2) and I think I should have ticked the other boxs but I didn't. I also got an error (see3) The 4th one I think is a different issue.On the restart it would only get to the purple screen before the login field appears. I presume I need to do something to the grub but have no idea what.My system is 64bit and a raid 1. The attachment 5 shows the partition arrangement I can boot into the the PC with a live (32bit 10.10) cd.
View 3 Replies View RelatedI am running 10.04 LTS inside Windowsxp.LTS is totally updated.What is more,in the settings section of update manager I have ticked to show normal releases as well.Still,update manager is not displaying "10.10 is available"Thus,unable to upgrade.
View 3 Replies View RelatedI updated my pc today, all went well no errors during upgrade. But I am unable to boot. I get the splash screen with Ubuntu and 4 coloured dots, then it goes and i get a page of txt. *starting apparmor profiles skipping profile in /etc/apparmor.d/disable: usr.bin.firefox plymouthd: ply-keyboard.c:384: ply_keyboard_watch_for_input: Assertion `keyboard != ((void*)0)' failed. *Setting sensors limits rather than invoking int scripts through /etc/init.d, use the service ( utility, e.g service s20plymouth-splash start Since the script you are attempting to invoke has been converted to an upstart job. you may also use the start ( utility, eg. start s20plymouth-splash Start: uknown job S20plymouth splash
If i leave it the screen just goes black I can get to ttyl by using ctrl&alt&f7 and log in.but thats about it startx just tells me no screens found I expect because xorg isn't used. If i go into recovery mode, failsafe graphics won't load either. So i select netroot and the enter startx which will give me a root desktop. I tried reinstalling grub, but no change. Not sure where to go from here i suspect it is something to do with plymouth? but i am no expert even tho i've been a user for 4 years
I recently got 10.04 installed on my computer by going through the upgrade chain all the way from 9.04.The upgrade chain ended with 10.04 LTS.Today I booted up and found a new distro, 11.04, went up, but when I went to upgrade it told me it could only do a partial upgrade.What's the deal, and how do I get the full 11.04?
View 6 Replies View RelatedI tried to upgrade to 11.04 from 10.10 but I get this error every time.
View 4 Replies View RelatedI have a dual boot Win7/Ubuntu laptop. I have been running it dual since 10.04, Lucid with no problems, and I upgraded to 10.10 also without problems. However, when I upgraded to 11.04 I began to get error messages on boot up.
Importantly - both Win7 and Ubuntu still work fine, so it could be worse, but clearly something is not right in GRUB.
I could solve this by wiping Ubuntu and reinstalling from the Live CD, but that teaches me nothing, so I would like to get to the bottom of the problem.
The following is what I get if I try to update grub:
jez@jez-laptop:~$ sudo update-grub
[sudo] password for jez:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.38-8-generic
Found initrd image: /boot/initrd.img-2.6.38-8-generic
Found linux image: /boot/vmlinuz-2.6.32-25-generic
Found initrd image: /boot/initrd.img-2.6.32-25-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows Recovery Environment (loader) on /dev/sda1
Found Windows 7 (loader) on /dev/sda2
error: syntax error.
error: Incorrect command.
error: syntax error.
error: line no: 153
Syntax errors are detected in generated GRUB config file.
Ensure that there are no errors in /etc/default/grub
and /etc/grub.d/* files or please file a bug report with
/boot/grub/grub.cfg.new file attached.