Ubuntu Installation :: 'grub_xputs' Not Found After Upgrade?

Oct 14, 2010

So today I decided I would upgrade my computer to 10.10 from 10.04. Everything was going great until after the restart. As the title suggests, when booting I get the message "error: the symbol 'grub_xputs' not found." and a grub rescue shell.From this shell, is there anyway that I can load Ubuntu so I can reinstall grub, or do whatever needs to be done? Unfortunately booting to a livecd does not seem to be much of an optiEDIT: After not finding anything I eventually gave up and took a dvd-rom drive out of another computer to get into the live cd and was able to solve the problem through there using kansasnoob's linked solution, so I guess my problem is solved, but only by changing the conditions of the problem.

View 6 Replies


ADVERTISEMENT

Ubuntu Installation :: Error: The Symbol Grub_xputs Not Found?

Oct 22, 2010

I just tried to upgrade to the latest release through the update manager.During the upgrade I told it to keep my old grub as I had issues the last time I upgraded.I dual boot XP and Ubuntu.When it told me to restart the computer I did and it boots to the following:

error: the symbol grub_xputs not found. grub rescue>

So I get a grub rescue prompt.What do I do now?

View 2 Replies View Related

Fedora Installation :: Upgrade From 8 To 12 - No Upgrade Root Found

Jan 27, 2010

I tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?

View 1 Replies View Related

Ubuntu Installation :: Partition Not Found After Upgrade?

Feb 10, 2010

I installed 9.04 then tried to upgrade to 9.10 and it froze so I had to reboot. Since then I have not been able to re-install 9.04 or see my partition. Everytime I try to reinstall it says and shows that it can't find the partition like there isn't a hard drive installed.

View 3 Replies View Related

Ubuntu Installation :: Unable To Upgrade 10.10 - 404 Not Found

Mar 17, 2011

W: Failed to fetch [URL] 404 Not Found [IP: 91.189.88.46 80]
W: Failed to fetch cdrom:[Ubuntu-Studio 10.10 _Maverick Meerkat_ - Release amd64 (2010100]/pool/main/p/pulseaudio/libpulse-browse0_0.9.22~0.9.21+stable-queue-32-g8478-0ubuntu21_amd64.deb

[code]....

View 1 Replies View Related

Fedora Installation :: Upgrade From F11 To F12 - No Screen Found

Feb 18, 2010

I used pre upgrade command then executed the upgrade (it took more than 4 hours) and I had a success message at the end saying that I have now to reboot. But now I have no more Xorg working, and I had to boot from the live CD to mount the LVM disk to report this problem (thanks to the live CD).

Looking at the Xorg.0.log the reported error is:
(II) Primary Device is: PCI 01@00:00:0
The PCI device has a kernel module claiming it.
This driver cannot operate until it has been unloaded
(EE) No devices detected.

Fatal server error:
no screens found

How I must do now to get back Xorg? Check the log file at "/var/log/Xorg.0.log" for additional information. I tried to remove and re-install Xorg, without success. Then I installed kmod-nvidia and executed nvidia-xconfig. The log says that I have to configure the kernel without nvidiafb support, but I don't know how to do it, and even if it is a good idea. I noticed that if I remove the /etc/X11/xorg** files, I can use startx but no much more.

View 4 Replies View Related

Fedora Installation :: F12 Upgrade - Boot Failure / No Root Device Found

Jun 1, 2010

I'm a long time Linux user. Finally got around to upgrading my Fedora 11 system to Fedora 12 by using the 'preupgrade' tool. The upgrade appeared to go well (downloaded packages, rebooted into installer, etc). However, now that the upgrade is complete, I'm unable to boot my system.

Here's my configuration:
/dev/sda (80Gb)
200Mb /boot partition (ext3)
52Gb / partition (ext4 - managed as logical volume)
2Gb swap partition (managed as logical volume)
20Gb /spare partition (ext3 - managed as logical volume) .....

All worked fine under Fedora 11 for the last few months. Grub now presents me with 'Fedora' and 'Windows XP' boot options. The /boot/grub/menu.lst file is essentially the same as it was for Fedora 11, except for the different kernel versions, etc. The boot sequence shows the Fedora bubble (??) and gets about 80% full when the screen goes black and the message displayed is:

No root device found
Boot has failed, sleeping forever
If I boot Windows, all works fine.

Am able to boot using a SystemRescueCD disk. The disks all look okay and I can mount/modify all partitions, etc. The grub menu.lst file read as follows (sorry, typed in, not copied):
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.32.11-99.fc12.i686.PAE)
root (hd0,0) .....

View 2 Replies View Related

Fedora Installation :: Upgrade From 11 To 12 Via Preupgrade / Mirrors Return "HTTP Error 404: Not Found"?

Sep 21, 2010

I`m having a problem with upgrading my Fedora 11 to either Fedora 12 or Fedora 13. When i start preupgrade, it lists all packages that need to be upgraded, but then it ends with the message that none of the mirrors can be found. I`m seeing the messages in the console, and indeed all the mirrors return "HTTP Error 404: Not Found". Any idea how to change this and eventually do an upgrade?. I also downloaded the Fedora 13 DVD, and tried to upgrade that way, but it never showed me the window which must give me the option to upgrade instead of doing a fresh install. The explanation in the official website clearly shows that this window exist, but after several tries with the DVD I did not get it.

View 1 Replies View Related

Ubuntu Installation :: 10.10 To 11.04 Upgrade Fails With "ubuntu-minimal" Cannot Be Found Error

May 6, 2011

I've seen this happening to others, but can't find the original bug report I saw. From what I can tell I'm getting the error because I am using a local mirror, as others have successfully updated using "official" mirrors.

What would cause the installer to differentiate between a local and an official mirror? I'm pulling everything anl.gov has for Lucid, Maverick, and Natty, and had no problems using the local mirror to dist-upgrade from 10.04 to 10.10.

The exact error is:

Code:
After your package information was updated the essential package 'ubuntu-minimal' can not be found anymore.

This indicates a serious error, please report this bug against the 'update- anager' package and include the files in /var/log/dist-upgrade/ in the bug report. main.log from /var/log/dist-upgrade:

Code:
2011-05-06 10:15:06,986 DEBUG running doUpdate() (showErrors=True)
2011-05-06 10:15:07,582 DEBUG openCache()
2011-05-06 10:15:07,582 DEBUG failed to SystemUnLock() (E:Not locked)
2011-05-06 10:15:08,032 DEBUG /openCache(), new cache size 1444

[Code]....

View 3 Replies View Related

Ubuntu Servers :: Upgrade From 8.04 To 10.04 - No New Versions Found?

May 11, 2010

Just wanted to point this out in case anyone had the same problem i did. Following the directions here:[URL]The final step on upgrading 8.04 LTS to 10.04 Server is:sudo do-release-upgrade --devel-releaseThis doesn't work![URL]says to use --proposed, which WORKS

View 3 Replies View Related

Ubuntu :: Error After Upgrade - No Suitable Mode Found

Nov 28, 2010

I was given a computer that has the Ubuntu operating system installed I was able to at least get online with it. I tried to upgrade it (don't know what version was installed on it) using the Update Manager. When the computer restarted I got two error messages:

Error no suitable mode found
Error unknown command "terminal"

The system then went on through the Ubuntu logo screen but then I got a black screen. I couldn't get the computer to do anything. How to at least restore the computer back to its previous state before trying to upgrade.

View 3 Replies View Related

Ubuntu :: Cannot Boot After Upgrade - File Not Found 'loadfont'?

Nov 30, 2010

Can not boot after upgrade - file not found 'loadfont' I have a 10.04 system that I installed the update for. Instead of doing the restart now option I choose to do a shutdown and upon a reboot I get an error and can not boot into Ubuntu.

The error I get is: file not found 'loadfont' unknown command And I get into an endless cycle of it if I try to boot into Ubuntu..can boot into windows fine as this is an Wubi install. Does anyone have a fix for me? This is on a work computer and I need a fix immediately. I have read about the Wubi issues with 10.10 but this is 10.04 not 10.10...?

View 5 Replies View Related

Ubuntu :: /dev/sda1 Or UUID Xxxxxxx Not Found After Upgrade To 10.04 From 9.10

May 28, 2010

I was upgrading from 9.10 to 10.04 and now my HDD can't boot at all to the 2.6.34-rc6 kernel, I get dumped to the busybox shell, and when I select the 2.6.30.9 I get "The hard drive for / is not ready or not present."

I can see the drive fine with fdisk -l, /dev/sda1 is my HDD, but when booting something isn't working right. Also, is there a way to make GRUB 2 automatically show the menu so I don't have to hold down the shift key?

View 5 Replies View Related

General :: Fedora 15 Upgrade Not Found

Jun 19, 2011

I performed the Fedora 15 Upgrade from Fedora 14 which worked fine except when I reboot the system does not find Fedora 15 i.e. I see the Fedora 14 Kernel and not the Fedora 15 Kernel in the reboot sequence.

View 12 Replies View Related

OpenSUSE Install :: Upgrade To 11.3 - But Comes Out With No Found Updates?

Jul 15, 2010

i thought this would be soo ovbiously easy i could work it out for myself...

now 11.3 is out, how do i upgrade from 11.2 (i presume theres an upgrade path via repo's than dvd/cd install)? i've tried 'Software Update', but comes out with no found updates.

View 9 Replies View Related

OpenSUSE Install :: Repositories Not Found With DVD Upgrade?

Apr 13, 2011

done 11.4 update from DVD on my two laptops and I'm trying to do my home machine now.Problem is that the DVD update does not find any repos. I told the update system to set up wired network using DHCP and everything seems OK, when I check the box to use separate media during installation the system won't find any community repositories and when I specify URL it simlply won't connect to the repo. As for as I can tell there is a connection to the internet, but maybe not

View 2 Replies View Related

Slackware :: 13.1: Mixer Device Not Found After Upgrade From 13.0?

Aug 10, 2010

have recently upgraded Slackware/Salix 13.0 to 13.1 and it all went smooth except for one problem with the mixer which apparently cannot be found. Only OSS card is seen in Xfce mixer, and OSS works, but no alsa card.I have a Via82xx onboard chip and a SB Audigy 1 [SB0092], Emu10K1. Via was set up with an alias as the first to load. All this worked perfectly in 13.0. Now aplay gives the following message:Quote:

ALSA lib confmisc.c:768: (parse_card) cannot find card 'Audigy'
ALSA lib conf.c:4154: (_snd_config_evaluate) function snd_func_card_driver returned error: No such device

[code]....

View 2 Replies View Related

Slackware :: Rev: Command Not Found After An Upgrade To Current

May 15, 2010

I'm using Slackware current. I've updated my current after about two months from the last update, and since there was a huge number of changes I'm having some problems. In particular, I've forgot (my fault!) to give a "slackpkg install-new" before rebooting, so now I'm getting stuck...

Installpkg now claims a "rev" command, but I cannot figure how to find it, since the Slackware package browser on the website is still broken (when will it be available?!?!). Now, each time I try to install or upgrade a new package, I get this error:

/sbin/upgradepkg: line 41: rev: command not found
/sbin/installpkg: line 59: rev: command not found

Where can I find the package containing "rev"?

View 2 Replies View Related

Slackware :: TexLive: Libpoppler.so.7 Not Found After Upgrade

Feb 28, 2011

Think the Feb 10th upgrade of Current messed up the shared libraries to TexLive Code: bash-4.1$ latex file.tex latex: error while loading shared libraries: libpoppler.so.7: cannot open shared object file: No such file or directory bash-4.1$ ldd /usr/share/texmf/bin/pdflatex | grep libpoppler* libpoppler.so.7 => not found

View 6 Replies View Related

Ubuntu Installation :: Upgrade From 10.04 To 10.10 Error "Could Not Calculate The Upgrade An Unresolvable Problem Occurred While Calculating The Upgrade"

Feb 12, 2011

I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:

* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade

View 1 Replies View Related

Debian :: Volume Group Not Found After Kernel Upgrade

Aug 7, 2015

This is a problem about linux-kernel-3.16-0-4-amd64 and LVM, I guess. I decided to write this here in case other users who installed their debian system with encryption enabled experience this problem with a recent kernel upgrade.

I use debian jessie. Today I gave the command:

Code: Select allapt-get upgrade

There was a linux-kernel upgrade to 3.16-0-4-amd64 among other packages to be upgraded.

After this upgrade my computer cannot boot anymore.

I get following error:

Code: Select allVolume group "ert-debian-vg" not found.
Skipping volume group "ert-debian-vg"
Unable to find LVM "volume ert-debian-vg/root"
Volume group "ert-debian-vg" not found
Skipping volume group "ert-debian-vg"
Unable to find LVM "volume ert-debian-vg/swap_1"
Please unlock disk sd3_crypt:

And it does not accept my password.

I used rescue environment on debian jessie netinst iso and decrypted the partition and took a backup of my /home. Now I have not much to lose if I reinstall my system but I still want to fix this problem if possible.

I have reinstalled the kernel using debian jessie netinst rescue iso but nothing changed.

I have Timeshift snapshots located at /home/Timeshift but timeshift --rescue command cannot find a backup device, it sees the device as crypted. If I could restore a snapshot it would be very easy to go back in time and get rid of this problem. It would not be a real solution, however.

There is not any old kernel option in GRUB menu. So removing the latest one does not seem as an option.

View 4 Replies View Related

OpenSUSE :: Kernel Upgrade, VMware Borked, GLIBCXX_3.4.11 Not Found

Jan 27, 2010

Using Suse 11.2, Linux 2.6.31.8-0.1-desktop.i386

Did a kernel upgrade today and VMware 6.5 wouldn't build modules, failing with

Code:
version `GLIBCXX_3.4.11' not found

To get it working again:

Code:
cd /usr/lib/vmware/lib/libstdc++.so.6
mv libstdc++.so.6 libstdc++.so.6.orig
ln -s /usr/lib/libstdc++.so.6.0.12 libstdc++.so.6

[Code]....

View 1 Replies View Related

Debian :: Libc6 Upgrade Resulting In 'ldconfig' Not Found On PATH

Mar 8, 2010

I just tried installing another version of libc6 (2.10.2-6) with kpackage. It didn't work so I had a broken package on my system. I then wanted to fix it with synaptic package manager which then told me in order to remove it, I had to pretty much uninstall all of linux. I then tried installing the older version of libc6 (the one I'm supposed to have: 2.7-18lenny2). That gave me the error code

dpkg -i '///home/sam/torrents/libc6_2.7-18lenny2_i386.deb' ;echo RESULT=$?
dpkg: `ldconfig' not found on PATH.
dpkg: 1 expected program(s) not found on PATH.
NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
RESULT=2

I already checked my path and it was: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin (I found it with echo $PATH)

I guess my path is okay so the problem is in ldconfig but how can I get ldconfig in the path and where could it be now?

View 2 Replies View Related

Server :: Grub After Upgrade Suse 10.2 - Error 21 Disk Cannot Be Found

Jun 30, 2011

I have a system running om vmware esxi with suse 9.3 i did an inplace upgrade to 10.2. i got the follwoing error during upgrade error occurred while installing grub (version 0.97) error 21 disk cannot be found. I ignore this error and the upgrade went fine. after a reboot the server works pretty fine. Except one thing GRUB.. i cannot install it on this system. i want to install grub on this system.

View 1 Replies View Related

OpenSUSE Install :: 11.4 Upgrade - Fatal Server Error, No Screens Found?

Oct 27, 2010

I have just upgraded from 11.1 to 11.4. When I boot up, I get a command line, but when I do 'startx', I get 'Fatal server error: no screens found'. I have been looking for a solution and tried 'Xorg -configure' but this gives:

Code:
Failed to load /usr/lib/xorg/modules/drivers/vboxvideo_drv.so: undefined symbol: resVgaShared

[code]....

View 6 Replies View Related

Ubuntu Installation :: With NVIDIA 310M Graphics Card Drivers (310M) On A Dell Vostro 3300 - Errors "no Device Found - No Screens Found"

Oct 28, 2010

I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.

The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:

1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??

View 9 Replies View Related

Ubuntu Installation :: Upgrade Disaster - Warning "installation / Upgrade Should Not Be Interupted" - Computer Froze Up

Jun 1, 2010

While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.

View 3 Replies View Related

Fedora Installation :: I2O Controller - No Volume Groups Found Volume Group "VolGroup00" Not Found Unable To Access Resume Device

Apr 8, 2009

Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:

Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"

View 2 Replies View Related

Ubuntu Installation :: Beta 10.04 Upgrade - Upgrade Manager Did Not Give The Option

Apr 16, 2010

I am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.

View 2 Replies View Related

Ubuntu Installation :: Upgrades Held Back - Two Packages - Grayed Out And Do Not Upgrade In Upgrade-manager

Mar 29, 2010

I'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.

If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager

The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved