Ubuntu Installation :: Swap The Internal HD Out To A New System?
Jan 29, 2010
I have an existing Ubunto 9.10 install sitting on a 500 GB SATA drive that was sitting in my second SATA port. I'm trying to swap the internal HD out to a new system that has a 500 GB SATA drive with Windows 7 on it as the primary drive, in SATA port 0. When I configure BIOS to boot from my Ubuntu drive, I just get a flashing cursor on the screen and no Grub bootloader like I was before.
Does this mean Grub isn't on my Ubuntu drive? Should I install grub on both my Ubuntu drive's MBR AND my primary Windows 7 drive's MBR, or only one of the other. The instructions I've been reading don't specify which drive to reinstall Grub on and which drive I should boot from, so I'm confused. How do I get it so that Grub acknowledges my Windows 7 install on the primary drive?
View 6 Replies
ADVERTISEMENT
Mar 20, 2011
Does one need to Check the Swap filesystem, from time to time
View 4 Replies
View Related
Apr 8, 2010
How can I install linux using an external hard drive? ANy help would be greatly appreciated. I dont have any CD's or anything and this is my only option.
SO how can I install linux FROM my external HDD ONTO my internal HDD?
View 1 Replies
View Related
Sep 1, 2011
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies
View Related
Feb 27, 2011
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
View 1 Replies
View Related
Sep 8, 2010
Can it be done? I finally got antiX running a 64MB base memory machine, bit I neglected to add a swap.
View 2 Replies
View Related
Jul 6, 2011
Is there any way to force the system to use swap space instead of RAM? I just upgrade form 512 to 1 gb. And when I installed ubuntu I give the swap space 1gb according to 512mb RAm requirement. Now I have 1 gb. When I use heavy applications i-e firefox, office, any game etc at a time the processing go to 100% and the RAM use 50+% of the memory. No swap memory will be use. Any way to use swap instead of RAM?
View 6 Replies
View Related
Mar 5, 2010
I'm running Ubuntu 9.10 otherwise flawlessly on a 2007 core 2 duo Macbook. Right now its set up to triple boot with OS X Snowleopard, Windows 7 Ultimate, as the other operating systems. I'm asking because I'm frequently having to force my system to power down after shutting down from Ubuntu, and I'm concerned that I could be corrupting files and damaging my hardware.
View 1 Replies
View Related
Aug 4, 2010
Currently and for the last half an hour System Monitor reports 31% in use by programs 68% in use by cache
So my 1GB of ram is maxed out. Things are kind of slow but not crawling (though at times, simple things like scrolling are stalled)
But it reports Swap: 0% in use.
Seems confirmed by the following:
Code:
$ free -m
total used free shared buffers cached
Mem: 993 967 26 0 82 560
-/+ buffers/cache: 323 669
[Code]....
View 2 Replies
View Related
Jun 28, 2010
I just installed the latest version of opensuse and I just put the RAM and SWAP widget on. I can see the ram meter is working fine but the swap space is always 0. How do I activate the swap so it starts using that space?
View 9 Replies
View Related
Sep 23, 2010
why the operating system is not using swap.I am using Fedora Core 13, it did have 4GB of ram, all of the ram was used. performance was poor. I used free and top to check if it was swapping - according to both, swap was NOT used at all. Never the less, I upgraded to 8GB and performance improved a lot.However, once again, free and top state that ALL the ram is utilised, yet NONE of the swap is utilised.
View 2 Replies
View Related
Mar 29, 2010
I've just upgraded my wife's netbook to UNR 9.10. This seemed to go well and the netbook has been working fine since. Yesterday my daughter used the netbook with out any issues, but when my wife tried it halted during boot with:
Swap waiting for UUID: xxxxxxxxxxxxxx
After a couple of reboots it started working fine, but looking at /etc/fstab the entry for swap is different to the UUID shown in blkid Do I just update fstab with the UUID from blkid?
View 2 Replies
View Related
Apr 17, 2010
So my Ubuntu 9.10 install has been hanging on boot lately. At first I thought it was a problem with the 2.6.31-20 kernel, because that is the default boot option in GRUB2. It seemed things worked fine if I instead chose the 2.6.31-19 kernel, but I had that hang yesterday too.I also had 2.6.31-20 boot just fine yesterday. Once. Next time I tried it - system hang.
What I mean by "hang" is,I would see the GRUB OS selection screen (I have 2 versions of Windows and 2 versions of Ubuntu on this machine),select the first choice (Ubuntu with the 2.6.31-20 kernel),see the "pulsating white Ubuntu logo" briefly,then a bunch of scrolling text, then...blank screen.Then nothing.I let it sit for a few minutes to a few hours when it did this, but nothing further happened.Then yesterday, I decided to let it sit the whole time I was at work, approximately 9 hours.I came home to a screen with the white Ubuntu logo and the following error message:
Code:
One or more of the mounts listed in /etc/fstab cannot yet be mounted:
swap: waiting for UUID=3fba81a3-de14-4f56-9e7b-ace95d933a0e
/proc/bus/usb: waiting for none[code]....
So it looks like I have a disk partition that refuses to mount sometimes.Gparted for some reason wouldn't tell me the UUIDs of swap partitions.They also don't show up in /dev/disk/by-uuid. Using the bootinfo script, I found out that 3fba81a3-de14-4f56-9e7b-ace95d933a0e is the 4 GB swap partition associated with my Ubuntu 9.10 install.The disk that partition is on is rated "healthy" by Disk Utility, with only a few bad sectors. The HDD is about 7 years old, so it's in remarkably good shape.What could cause this swap partition to not mount during boot, and how do I fix it?
View 3 Replies
View Related
Jun 13, 2010
I am using Kubuntu Amd64 Lucid on my desktop and I have allocated 08.03 GB partition for swap. But today I have noticed that system monitor is showing this as 09.90GB which is incorrect.
I tried deactivating the swap from KDE Partition manager. Even after deactivating swap it still shows the swap as 1.9 GB. So there is clearly 1.9 GB swap added to my system. I am not sure how. Attached screen shot clearly shows the system monitor issue. One possibility is, I have 4 GB (3.7 asper system) RAM comprising two units of 2 GB cards. Is this 1.9 GB read from one of these? I tried to boot the system from Kubuntu AMD64 live CD and then it showed only 8 GB as expected. So not sure whats causing this issue in my installation.
View 2 Replies
View Related
Dec 22, 2010
I have got 2 disks available and would like to create 3 main partitions: one for file system (maverick), one for home folder and one for linux swap.
I read many howtos and now I feel more confused!
I would like to obtain the more efficient solution in order of speed (performance): as far as I can understand (not so far) .. it seems that the best choice is:
Quote:
disk 1: [beginning] ubuntu | home | others [end]
disk 2: [beginning] swap | others [end]
My situation now is, according to guides I read before:
Quote:
disk 1: [beginning] ubuntu | others [end]
disk 2: [beginning] home | others | swap [end]
now .. before moving all my staff ..
I thought to have understood that ubuntu use swap only for hibernation / suspend activities, and therefore it's recommendable to put the system at the beginning of one disk, and the home folder at the beginning of a second disk in order to have quickly two disk reading / writing on the right position without moving too much and spend time.
But now I'm confused because it seems that ubuntu DOES use swap for normal activity (and so it's better to put it) at the beginning of a second disk.
I always saw my swap next to zero during my activities .. is ubuntu using swap like windows with pagefile.sys?
View 1 Replies
View Related
Sep 17, 2010
As mentioned in the other two posts, my debian freezes when I use swap. Sometimes only the window-borders dissapear. However, this is not endurable for me. The answer "this is normal" is unfortunatly not getting censored. Even linux must be able to take heavy load without crashing.
Details here: [URL]
and here: [URL]
The vlc-problem could be solved by the way: It seems my MESA-installation caused OpenGL to work. As output in vlc, everything runs as it should now.
View 14 Replies
View Related
Sep 21, 2010
if I dont use the oracle script written below, then system start fine, but if I use the following script, then system hangs up at startup at message 'Enabling swap space'. I am using Redhat ES 4, with Oracle 10g R2.
vi /etc/init.d/oracle
#!/bin/bash
#
# Run-level Startup script for the Oracle Instance and Listener
[code].....
View 5 Replies
View Related
Jul 14, 2011
when I load into Ubuntu 11.04 from my USB drive, why can't I access the files on my internal hard drive? I mount the drive but I cannot see any of the music, videos or documents contained on that drive (which is also an Ubuntu 11.04 drive). I was wondering so I could copy those files onto my external hard drive and reinstall since my Ubuntu crashed.
View 3 Replies
View Related
Jan 28, 2010
My fedora12 send me this error message:
Code:
An internal system error has occurred ..... Please use your distribution bugtracker to report this error ... What is the bugtracker? How i can use it?
View 2 Replies
View Related
Aug 10, 2011
I want to implement ticketing system on cent OS 5.5 for internal use, i.e when user is having any problem in their system, they will rise a ticket with its number and we will close that number after we fixing the issue. So could anybody please provide any use full url links to implement it?
View 5 Replies
View Related
Feb 17, 2010
system() and execvp() both work by creating a new process. Question: Do they create new processes by internally calling fork() or there is some other way ?
View 6 Replies
View Related
Jul 7, 2011
I live in a crowded area so I have to use headphones almost all of the time. I just leave them plugged in so when an alarm goes off from Thunderbird or Evolution, I can't hear it. Is there a way to get some use out of my internal system speaker and have a reliable calendar-event-reminder and alarm? I'm talking about the one that will beep from inside the computer even if you have headphones plugged in.
View 2 Replies
View Related
Dec 12, 2010
This laptop that I am trying to get Debian 5 working on is occasionally locking up during boot at "Activating Swap..." WTF could cause such a bizarre thing? The swap partition is just empty space. Activating must be nothing more than confirming it exists and mounting it.
View 3 Replies
View Related
Nov 27, 2009
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
I cant update my system what can I do?
View 12 Replies
View Related
Dec 5, 2009
I've upgraded from FC11 to FC12 32-bit (live CD to HD install). Now when I try to perform software updates it gives me an Internal System Error. I've clicked on more details and it gives me the following:
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
Everything else seems to work, including all of the programs I've installed from non-Fedora sources i.e. DOSEmu, Adobe Flash plug-in and Cannon LBP-660 printer driver.
View 6 Replies
View Related
Apr 16, 2010
I am running an openSuse 11.1 server.
How easy is it to install a complete Bugzilla system for my own internal use?
Is there an rpm that will set it up automatically?
Is it part of the distro? Or 11.2 or 11.3?
What is the easiest way to install it?
View 8 Replies
View Related
Dec 7, 2010
Lucid on an Acer Travelmate800.Can anyone tell me why I have 0k for swap space? I allocated swap which I can see in my Disk Utility's 'volumes' display.
View 5 Replies
View Related
Jun 24, 2009
i have a RAM of 1 Gb & swap of 1Gb with fedora11 installed, initially in RAM programme memory uses around 300 Mb & cache uses 600-700 Mb , but after some time it starts using swap memory though my programme memory is still around 300 mb, it keeps on increasing swap memory as a result my system keeps on slowing down & finally when swap memory is 100% system almost stops responding but programme memory is still around 300mb.
View 7 Replies
View Related
Jun 21, 2010
I might need to switch to i686 ArchLinux as flashplugin has been removed from the 64 bit version. Also, i could then install virtualbox-ose. Since 32bit os has 4G limitation, is a swap partition even needed/used on a system with more than 4G hardware ram?
View 11 Replies
View Related
Apr 10, 2011
why is a swap partition a requirement for a linux setup? What arguments would you use to decide on the size of the partition?
View 3 Replies
View Related
