Ubuntu Installation :: Partioning New System 2 Drives?
Mar 18, 2011
setting up my new Laptop.
1st Drive = 90B SSD
2nd Drive = 500GB Sata
8GB = RAM
On my old system, I had one drive that was setup this way: 90GB drive will house all apps and system files, etc. 500GB would be for storage. like a huge /home. I looked at soem of the posts and I see people doing a /virt partition for their VM's. I do use a VM, but do not really understand the /virt partition setup... Definitely need help here. Need some guidance on how to best set this up. My plan is to clone the 90GB drive that will have ALL of my apps... If the 1st drive fails, I can just pop in another drive and not miss a beat...
View 9 Replies
ADVERTISEMENT
Jan 26, 2011
I have been happily using Ubuntu for a good while now. It started out sometime around the end of '09 when I purpose-built a machine to continue using WinXP Pro as my primary OS, but using a ROMTEC Trios to mechanically switch to another hard disk, booting Ubuntu Karmic. I liked the fact that the Trios kept my two disks from "seeing each other", because, at the time (and perhaps, still now), I was not ready to keep the peace between a Linux boot and a Windows boot. It was simple: use XP for "day-to-day" for a while, then power down, flip a switch, and boot up Ubuntu to get my toes wet in the Linux world.
I very quickly developed an affinity for the Ubuntu experience, and ditched my XP installation in favor of a blank slate for Linux experimentation. The disk which previously contained XP has since housed various musings of mine, including Ubuntu Studio, Puppy Studio (yes, I am a recording musician), and straight Puppy, along with some recent tinkerings with straight Ubuntu Maverick (which I've had problems with due to what I believe is lack of driver support for nvidia-96).
BTW, my current primary install is that of the original Karmic install, but upgraded to Lucid...running just fine to this date, but wondering a bit at how I'm only showing 11GB of free space on a 160GB disk...I can't quite figure where the space has gone...the math doesn't seem to work in my head, but then again, I'm still a n00b in a lot of ways.
At any rate, I've gotten a lot of mileage out of Ubuntu so far, and I'd like to experiment with "pimping" a clean Lucid installation from the ground up (as I said, I'm having graphics driver issues with Maverick, and I'd kinda like to stay with an LTS release for the time being anyway).
I'm thinking that a customized partition scheme would be a good thing to think about, and the geek in me is inclined to reach beyond the installer defaults and even beyond the common recommendations of adding a separate /home partition. I've read an awful lot about the subject, and there are as many opinions as there are underarms, but I've just gotta ask it anyway:
For a single-user desktop, is there any efficacy in using separate partitions for /boot, /tmp, /usr, /var, /opt, and/or /usr/local? I know most that I can do without a separate /srv partition, but for the others, I just wonder if I can use separate partitions for both security and optimization reasons.
View 1 Replies
View Related
Jun 8, 2011
Is it possible to create a dual boot system from two separate disk drives each having been created as a single boot computer? I have an 80gb disk drive with Windows XP installed on it. I have a 160gb disk drive with Ubuntu 11 installed on it.
I have installed the Windows disk drive as drive 0 and the Ubuntu disk drive as drive 1 in my computer. Each disk drive was set with cable select pin settings. The computer boots to windows. If at all possible, how would I go about setting up the system to dual boot to both windows and Ubuntu? I have attached screen shots of part -l, gparted 80gb disk and gparted 160gb disk.
View 4 Replies
View Related
May 2, 2010
I have the latest download of Ubuntu Server 10.04 installed. I have not installed a gui for it. I would like to be able to do this from command line if possible. I will be running this server headless but I would like to be able to login remotely if necessary. My hunch is I will need a gui to be able to log in remotely?
I have three Internal drives in my server. 80GB, ext4 formatted, this has the server os loaded on it. The other two drives are 160 and 500GB formatted ext4 as well but they are empty. I have two Ext USB drives with all my stuff I don't want to lose. Both are formatted NTFS. So I need help but keep in mind I am going to run the server headless, but would like to login remotely if necessary without a gui.
My other home computers will dual boot windows or linux, so I need to know what is the safest and best way to format the two drives in my server. ex4 or ntfs? Will I be able to run server without a gui as headless? I just installed Samba4 and starting down the learning curve by googling how to set it up.
My file sharing is simple. Nothing special within the Lan, but want to keep hackers out from the outside world. I use Logmein on my windows computers and may want to setup a remote login for the server at some point. Right now my big this is setting up the drives, shares, and going headless. I would like to be able to just turn the thing on and not worry about it.
View 5 Replies
View Related
Oct 15, 2010
i recently attempted to dual boot windows 7 and ubuntu 10.10 on my toshiba satallite l50d5 laptop (which has had major problems booting/running ubuntu except for this latest release) anyways . i ran the live boot through a cd. saw that everything was running good and decided to dual boot . everything was fine until i got to the screen where it asked to put my name and password. it would not advance from there (it set trying to set up network time or something of that nature), i do not have internet access so im guessing that might have been a problem. anyways the installation wouldnt complete after HOURS so i decided to just turn off my computer. i booted it up again and windows loaded. i checked my windows drive and it was half of what it used to be (so the partioning worked i guess) but i cant get to my ubuntu partition. i see it when i go in through the live cd though but it doesnt give me the option to boot it when i turn it on normally. how do i get rid of the ubuntu partion or actualy allow it boot up?
View 1 Replies
View Related
Aug 15, 2010
I have a working system with triple boot (Macos, Debian and Windows Xp).I have total 4 partitions, EFI, Macos, Linux Ext3 and Windows Ntfs. At this point I want to split my Windows partition and turn into the new user "Home" partition. I vaguely remember that there might have been some limitations with number of partitions regarding multiple boot schemes. Does anyone have an idea if there would be any problem if I go ahead and split my Windows partition and end up with 5 total partitions on this laptop?
View 7 Replies
View Related
Jan 28, 2010
i have recently setup and installed Ubuntu 9.04 on a virtulal drive usingVMWare 6.04, installed the desktop gui as well, I need to add other drives for data and loggng, which I did in the VMWare side. I can see the 2 drives in ubuntu, but can not access them, I get he unable to mount location when I try. How can resolve this please as I need these to virtual drives to be used as data drives.
View 1 Replies
View Related
Jan 19, 2011
I have (had) Debian Testing running on a 250GB IDE hard drive, partitioned normally.
I also have 4x 1TB drives in a raid 5 using mdadm, and 2x 500GB drives in a raid 1 also with mdadm.
I put the two arrays in lvm using:
I then used "lvcreate" to make storage/backup 300GB, and the rest went to storage/media (approx. 2TB usable). I put an xfs filesystem on both and mounted them.
All was working fine until the system drive shorted out and died on me this morning. As far as I can tell, all my other drives and everything else is fine. I do a daily rsnapshot of the filesystem, which of course is residing on storage/backup (stupid, I know). So I have full backups of everything, but I'll have to put a new hard drive in and reinstall Debian before I can restore everything.
I've reinstalled before and simply reassembled mdadm arrays and remounted them before with no problems, but this is the first time I've used lvm, so I'm not sure what I have to do to restore everything. Is it as simple as reinstalling the system then doing a:
View 4 Replies
View Related
Feb 18, 2011
there are some drives in my system that appear to be always mounted (were at some point) that I cannot get rid of - i checked fstab, and do not appear there - 2 are related with the use of truecrypt, and 1 is from an exernal HD
I use Maverick 10.10 x64
View 3 Replies
View Related
Feb 2, 2010
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies
View Related
Oct 12, 2010
I currently have an Ubuntu 10.04 Server with 10 2TB hard drives (Hot Swappable). I discovered that having a software raid over 16TB is not supported, so I split the drives into 2 sections and have 2 Software Raid arrays storing my movies, audio, pictures, and other software. The total current usage is around 7TB.
Since backing the files up to DVDs or even BlueRay is laughable, I am going to backup the system to 2TB hard drives probably 4 of them, the problem becomes that I can only hook one backup drive at a time into the system using a hot swap tray. Now I know that I can do this manually by copying the files one at a time to the drive until it is full, switching the drive out and repeating this, but I am hoping for an automated solution, Start backup, plug first drive in, system fills up drive, swap and repeat. Also it would be nice if the system remembered what had already been backed up so when I add files to the system, I only need to attach the last drive and not start the process over.
View 3 Replies
View Related
Jan 26, 2011
Our company just bought faster hard drives for our webserver. A lot of the software and services set up on this machine have had config files set up, etc.. It would take a while to rebuild it from scratch, which i may have to do. I know most config files are in /etc and i can use apt to spit out a list of installed packages.
Any tips that i may want to know to avoid any gotchas here? We need to minimize downtime, of course, and get everything up like it is now.
View 4 Replies
View Related
Feb 14, 2011
My system won't boot unless I have 2 sata drives. It doesn't matter what's on the second one. It even boots if the second "disk" is a powered sata to IDE adapter attached to an unpowered IDE drive.If I don't have the second drive I get this when I try to boot:
Alert! /dev/disk/by-uuid/ ...<your UUID>.... does not exist,I don't see anything that seems odd to me in my /etc/fstab file.
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0[code]....
I've done the whole use a live disk, chroot into my system and reinstall the kernel to no avail. uname -r gives -- 2.6.32-28-generic
View 6 Replies
View Related
May 15, 2011
I have 3 u3 type flash drives, 1 Memorex and 2 Sandisk Cruzers, and one non-U3 (JDSecure).The purpose is file storage.All four work perfectly on Ubuntu 10.04 and XP.I have continual problems with the U3 devices on 11.04. Problems vary from not being able to open the flash drives causing screen to freeze until I remove the device from the hub, or I am unable to unmount the device causing the desktop to freeze until devices are removed.Sometimes I am able to access files in the flash, before the freeze.The non-U3 device works perfectly on 11.04, 10.04, and XP.Sounds like a system problem to me. I have google searched this to death, but can't find a solution.
View 4 Replies
View Related
Jul 22, 2011
How can I see all the physical hard drives on my Ubuntu system — regardless of whether they're mounted — as well as their partition info, sizes, &c.? I have three physical drives, but only one seems to be mounted. I'd like to mount the other ones too, as I have some data on them.
View 1 Replies
View Related
Jun 29, 2010
For SATA drives in AHCI mode, the names are /dev/sdX, what about a RAID-0 or RAID-1 array of SAS drives? Are they the same?
View 8 Replies
View Related
Aug 10, 2010
I'm going to reformat my external drives to get rid of the crud that I've built up. (Crud being incremental backups, windows software, and similar things.)(I also want to get rid of the FAT32 file system that they use.) These are USB 1TB drives. The theory is that data is written to it once, but read back a number of times. (I also burn that data to DVD. If there was software that could organize 5TB of data on DVDs, I'd be using them.)
I"m trying to decide whether to use ReiserFS, Ext4, or another file system. Basically, I want something that:
* Won't get corrupted when the power fails;
* Can handle files that are 4+GB in size;
* Uses extends --- preferably without user intervention;
View 3 Replies
View Related
Aug 1, 2011
My questions begin with Virtual Box. I have Windows XP installed via Virtual box. Ordinarily, I hate everything about windows, but unfortunately some things related to my job I am still in need of having some access to some form of Windows. I am wanting it to recognize all of my multiple hard drives that are installed on this system, 4 of them to be exact, so that I can utilize files from all of them.
View 3 Replies
View Related
Oct 5, 2009
I've installed Fedora 10 short time after it came out. Now I am having some problems unmounting thes drives on restart or shutdown. It hangs at the stage of 'unmounting file system'. I've looked into this matter and discovered that those drives are automatically mounted and shown on the Gnome file browser. As the /etc/fstab indicates, it is not mounted by it. I must have done something to have all the hard drives shown in the file browser and now Fedora seems to be unable to unmount them.
Quote:
#
# /etc/fstab
# Created by anaconda on Mon Sep 7 20:25:11 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[Code]....
View 4 Replies
View Related
May 14, 2011
I have a 3 year old PC with 4 internal SATA ports. My old SATA hard drives, all smaller than 2TB, work fine. If I buy a 3TB SATA hard drive, will it work in Linux? Will Linux with GRUB be able boot from such a hard drive without a BIOS upgrade? With a BIOS upgrade? It's fine for me to upgrade my Linux to the newest kernel.
View 1 Replies
View Related
Sep 29, 2010
iv been looking around at the different Linux systems particularity the smaller ones such as DSL, Slax and Puppy Linux. However i need a Linux distribution that doesn't have a GUI desktop environment just the plain old terminal to work on. The system would have to be able to boot from a USB drive also. If anyone knows a systems that fits those requirements or something else related please post. Also what file system is best for USB drives for booting systems?
View 4 Replies
View Related
Aug 20, 2009
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 2 Replies
View Related
Aug 20, 2009
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 1 Replies
View Related
Oct 20, 2010
Our CentOS 5.5 server has an intermittent problem where kswapd0 begins using 100% CPU, driving the system load to 20-30 and higher, and eventually crashes the server. The problem seems to be triggered by an intensive Java process (Lucene indexing), but only once every month or two. Lucene reindexing normally runs every 15 minutes without a problem. When the problem happens, there is still plenty of free RAM (as measured by /usr/bin/free's "buffers/cache" value, which is 1.5GB) and free swap space. The server is running MediaWiki 1.15 with the standard CentOS Apache, PHP, MySQL. My intuition is that this is a kernel/swapper bug.
Kernel info:
$ uname -a
Linux myhost 2.6.18-194.11.1.el5 #1 SMP Tue Aug 10 19:05:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Memory info:
Normal memory usage:
$ free
total used free shared buffers cached
Mem: 3090688 2769932 320756 0 258416 1531780
-/+ buffers/cache: 979736 2110952
Swap: 2097144 8212 2088932
Memory usage 30 seconds before a crash:
$ free
total used free shared buffers cached
Mem: 3090688 3050764 39924 0 113772 1309972
-/+ buffers/cache: 1627020 1463668
Swap: 2097144 179480 1917664
View 7 Replies
View Related
Apr 21, 2011
Is there an easy way to add SATA drives to an existing system and have them m automatically at boot?So far I've been able to create a partition and format but they never mount at boot.What do I have to put in fstab so it will work?Also, since RAID doesn't work in Debian, is it possible to make two drives mount at the same folder
View 3 Replies
View Related
May 20, 2010
Through some recent update, which one I am not sure, my system no longer responds to removable media such as flash drives and insertions of DVD/CD disks. Whereas before, for instance, if I inserted a USB flash drive, the "Device Notifier" would pop up, tell me that a new device had been detected, and ask me what I wanted to do with it, now nothing. "My Computer" (sysinfo:/)does not update either. The kernel knows the device is there, since I can see it when I do "lsusb". OpenSuSE x86_64 11.2.
View 3 Replies
View Related
Aug 2, 2010
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
View 9 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Jan 18, 2010
I'm breaking into the OS drive side with RAID-1 now. I have my server set up with a pair of 80 GB drives, mirrored (RAID-1) and have been testing the fail-over and rebuild process. Works great physically failing out either drive. Great! My next quest is setting up a backup procedure for the OS drives, and I want to know how others are doing this.
Here's what I was thinking, and I'd love some feedback: Fail one of the disks out of the RAID-1, then image it to a file, saved on an external disk, using the dd command (if memory serves, it would be something like "sudo dd if=/dev/sda of=backupfilename.img") Then, re-add the failed disk back into the array. In the event I needed to roll back to one of those snapshots, I would just use the "dd" command to dump the image back on to an appropriate hard disk, boot to it, and rebuild the RAID-1 from that.
Does that sound like a good practice, or is there a better way? A couple notes: I do not have the luxury of a stack of extra disks, so I cannot just do the standard mirror breaks and keep the disks on-hand, and using something like a tape drive is also not an option.
View 4 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
