Ubuntu Installation :: Mysql Odbc Connector Installation Crash?
Sep 14, 2010
I use ubuntu lucid lynx, LAMP (mysql 5.1 and last php) and tried to install the package from mysql web page (mysql-connector-odbc-5.1.7-linux-glibc2.3-x86-32bit.tar.gz) through alien. Terminal output is as follows:p { margin-bottom: 0.21cm; }
sudo alien -d -c -k -i mysql-connector-odbc-5.1.7-linux-glibc2.3-x86-32bit.tar
dpkg --no-force-overwrite -i mysql-connector-odbc_5.1.7-1_all.deb
(Lendo banco de dados ... 147517 arquivos e diretios atualmente instalados).
[code]....
View 1 Replies
ADVERTISEMENT
Apr 6, 2016
I got assigned to a project, where the installation is done over ansible. As I'm new in linux, python, django, ansible I wanted to try this out on a empty linux debian.
Code: Select alluname -a
Linux DebianABC 3.16.0-4 amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86 64 Gnu/Linux
When I now run my ansible playbook it tries to install mysql and suddenly I get an error:
Code: Select all:stderr: DEPRECATION: --allow-external has been deprecated and will be removed in the future. Due to changes in the repository protocol, it no longer has any effect.
DEPRECATION: --allow-unverified has been deprecated and will be removed in the future. Due to changes in the repository protocol, it no longer has any effect.
Could not find a version that satisfies the requirement mysql-connector-python==1.0.12 (from -r /home/abc/abcTest/requirements.pip (line 36)) (from versions: )
No matching distribution found for mysql-connector-python==1.0.12 (from -r /home/abc/abcTest/requirements.pip (line 36))
FATAL: all hosts have already failed -- aborting
So I checked the target machine and tried to run
pip install -vvv -r requirement.txt mysql-connector-python
As version 1.0.12 is an old version, I was searching and tried the following: [URL] ....
But also if I run the installation by direct download I have the same error message:
Code: Select allabc@DebianABC:/home/abc/abcTest$ pip install -r requirements.pip -vvv mysql-connector-python
Collecting http://cdn.mysql.com//Downloads/Connector-Python/mysql-connector-python-1.0.12.tar.gz (from -r requirements.pip (line 36))
Starting new HTTP connection (1): cdn.mysql.com
"GET //Downloads/Connector-Python/mysql-connector-python-1.0.12.tar.gz HTTP/1.1" 200 230923
[Code] ....
I was reading about the version requirements from PEP: [URL] .... but as the version looks ok, this should not be the problem.
View 0 Replies
View Related
Jun 20, 2011
I installed Tomcat (apt-get install tomcat6 tomcat6-admin tomcat6-common tomcat6-user tomcat6-docs tomcat6-examples) and it runs without problems.
I installed MySQL (apt-get install mysql-server) and it seems to run without problems too.
I changed the default JRE (update-java-alternatives -s java-6-sun).
The weird thing is - if I put the connector-jar into my web application (WEB-INF/lib), the connection works. If I put the connector-jar into usr/share/java, it does not work. If I write the jar location into the CLASSPATH and try "java com.mysql.jdbc.Driver", I get a NoSuchMethodError:Main, which means, that the jar is found?!
The datasource in the tomcat context.xml is:
<Resource name="jdbc/myresource" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="username" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/myschema" />
How can I make the database connection work without putting the jar into the WEB-INF/lib folder of the web application?
View 2 Replies
View Related
Apr 19, 2011
I have cpanel running and working with mysql. I need to add ODBC so I can get server side action script to connect to mysql also. Will adding ODBC affect anything else? I don't want to affect the way anything else connects?
View 1 Replies
View Related
Jul 27, 2010
I wish to connect to MySQL using an ODBC connection and I'm using isql to test. On the server connection using isql to local host is sweet however the problem is the client.Okay my set up looks like thisOn the server /etc/odbc.ini is[MySQL-scopus2008]Description = MySQL citation databaseDriver = MySQLServer = localhostDatabase = scopus2008Por
View 4 Replies
View Related
Jun 12, 2011
I'm trying to use MySQL's JDBC connector for java but even though I set the CLASSPATH variable, java cannot find the com.mysql.jdbc.Driver class.
Code:
[jordan@Jordan-Laptop java-stuff]$ ls /usr/share/java
cal10n geronimo-jta.jar java_cup-runtime.jar
[code]...
View 14 Replies
View Related
Jan 18, 2010
I want to ask how i set Linux class path for mail.jar and mysql-connector.jar. I have set the class path for java with the command.
Code:
when i do java -version it's work fine.
Also if i want to know that what shell i am using how can i find it.Also what is the command for showing class path variables or how can i see my JAVA_HOME class path.Means after setting the class path for above two files how can i see that these files have added.
When i write echo $CLASSPATH or echo $JAVA_HOME it shows nothing no error but again shows the prompt.
One thing more i want to run a java program on Linux it is in a package (named asteriskproject). It consist of 10 java files. I have run this program on windows using netbeans IDE.For this program i need to set my Linux class path for the above mentioned files, and this is my first time that i am running any program on Linux. So i want to ask how can i run my program. Simply put this asteriskproject directory in any folder and run the main file using javac. Is it right way to run the program that consist of package ?
View 3 Replies
View Related
May 17, 2010
I was clean installing Ubuntu 10.04, and for some reason my machine crashed during the final stages (has been a bit unstable recently), when running the init scripts I think. As a result I think that some programs are not being run properly. For example, cups is never running - I have to start it to use printers. And CDs dont mount automatically. Here are the services states:
Quote:
~ > service --status-all
[ ? ] acpi-support
[ ? ] acpid
[ ? ] alsa-mixer-save
[Code]...
What can I run to clean this up and get things to how they should be? Dont suggest re-installing - I have no time for that and it might crash at the same point.
View 4 Replies
View Related
Apr 3, 2011
uring its installation I faced the same problem as now: because my default sound card is gone and I am using an external one, during the installation, everythnig goes fine untill the first try for boot of the system, when the blue lines loads, loads, and stop on about 80%.I was told by specialist that the reason fot this is that the hardware check is failing and that this is why the system can not load. He disabled my sound card so to Fedora not to check for it (I don't know how) and installed Fedora 13. Now I am using it. And I am using an external sound card as well and I have sound working.
But now I want to instakll Fedora 14. And i tried and the same happened again!!! After installation, the blue bars loads, alods, untill abou t 80% and then stop!Please, tell me what to do! I have no connecion to the specialist now but I want to get Fedora 14 nstalled, and working with sound. This is the problem - that I have only external sound card
View 1 Replies
View Related
Jun 2, 2010
Here's the deal: I had a hard time with the 10.04 installation. This is my mom's 6-year-old Gateway E4000. During various points in the CD installation, it would crash, I'd get the error:
Code: Glib-Warning **: getpwuid_r(): failed due to unknown user id (0) and then a row of white vertical lines would start blinking on a black background. And I was like, "What?"
But after combing the forums, I managed to get through the entire install by hitting F6 at the beginning and selecting acpi=off, noapic, and nomodeset, then install. Coolio!
But then, when I boot, the same thing happens. The Glib-warning is gone, but at any point during boot, or five minutes after it's booted successfully, or ten minutes, the screen will go blank and I'll get those white blinking lines of death. Also, for the entire installation and the first few boots, my top menu bar was totally effed. It was upside-down and pixelated. This seemed to fix itself.
View 2 Replies
View Related
Apr 2, 2009
I have the latest LAMP running on F10 but need to do a database conversion from mysql 4.1.22 to mysql 5 for a client.
View 4 Replies
View Related
Mar 15, 2010
I am getting the following error when starting mysql using 'sudo /etc/init.d/mysql start':
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: ^G/usr/bin/mysqladmin: connect to
[code]....
View 1 Replies
View Related
Mar 3, 2011
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
View 1 Replies
View Related
Oct 14, 2010
Luckily I have a testing (dirty) laptop to try new OS's. With every new issue of Ubuntu I have had issues which usually take about a week to stabilize. As was with 10.04 which I had running perfectly in no time. But, as of date, 10.10 has been the worst. This time it simply crashed.After updating I ran 10.10 through some paces which looked OK. Then I went to settings manager, appearance, style, and tried a few new looks when after choosing a particular style the screen went black, and I wound up at my login. After I logged in it simply went black again, and back to login.
View 9 Replies
View Related
Jan 10, 2010
1 month ago we bought this computer. It has a GS7610 motherboard, AMd Athlon 3000+ with 2 gig ram, Seagate 500Gb HD and that's it.
I installed 9.10 64 bit, and all was flawless. Worked straight away, no troubles at all.
Then it was telling me the HS had bad sectors, so we took it back to the store today, and they said there was no problem. They also said that the vertical fuzzy lines were an OS problem, when we thought it was a monitor problem.
They also said that installing Windows would solve the problems.
Ok, so I went through the motions of trying to install a proper copy of Win7 pro I have here, and that went ok, albeit annoying
So, back to Ubuntu and did a full, clean re-install of 9.10 64 bit from the same CD I originally used that worked perfectly.
All installed, and I am hitting serious troubles.
There is a network connection, and I can ping anywhere with a small packet. Anything bigger, no go. I can bring up google, but no further. I can't bring up Ubuntu.com. I can't get updates, so even if they would correct the problem, it doesn't matter because I can't get them into the box.
It can download some updates, then finds one that it can't swallow and just locks up. I am also getting 'crash errors' that aren't a good thing.
It worked just fine, and now it's not.
I have searched and re-installed for the past 8 hours straight and still nothing.
I have this here box running 8.04 that just keeps ticking flawlessly, so it's not an update issue. I am here, so it's not a network or internet issue. Win7 got the internet just fine (sans sound).
I am almost willing to just accept Win7 without sound because at least it's something more than a non-updatable Ubuntu.
(And FWIW, you name anything that has been already said to fix the problem, I have already tried it at least twice already...)
Just re-installed for maybe the tenth time, and this time, for whatever reason, it is working just the way it was originally, and it even has the static on the screen going flat out, which I would really like to know how to solve...
Even got it dual booting with Win7 without effort.
View 9 Replies
View Related
Mar 8, 2010
Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:
Code:
sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.31.20.33); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.31-20-generic
linux-image-generic
linux-generic
Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?
View 4 Replies
View Related
May 18, 2010
I went ahead and made a clean install of Lucid Lynx after having trouble upgrading MySQL server - up to 95% function
1 thing that has been bugging me is that when I open F-Spot it crashes when I attempt to import any images
below is a terminal report for running the program
Code:
$ f-spot
[Info 18:04:05.568] Initializing DBus
[Info 18:04:05.636] Initializing Mono.Addins
[Info 18:04:05.731] Starting new FSpot server (f-spot 0.6.1.5)
[Code]....
View 6 Replies
View Related
Oct 12, 2010
I've upgraded my 10.04 (64bits) into 10.10 (64bits) on sunday and since I can't get thunderbird working anymore, I get the following error :
LoadPlugin: failed to initialize shared library /usr/lib/mozilla/plugins/nppdf.so [/usr/lib/mozilla/plugins/nppdf.so: wrong ELF class: ELFCLASS32]
Inconsistency detected by ld.so: dl-open.c: 612: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
It seems nspluginwrapper has similar issues...
I've seens there has been similar problems with skype but downgrading to ia32-libs_2.7ubuntu26_amd64.deb didn't fix the problem.
View 1 Replies
View Related
Oct 30, 2010
I've been using Ubuntu since Feisty Fawn, so I've been around the block when it comes to upgrades. From 9.10 to 10.04 I did a clean install, but I decided to try my luck with a web upgrade to 10.10. Well, so far it looks like that was a bad idea. I can't stay in gdm for more than about 1.5 mins before it crashes and drops me back to the greeter. Honestly, I'm not sure exactly what's crashing, but I'll append what logs I think will give some info.
[Code]....
View 3 Replies
View Related
Dec 4, 2010
Just tried to upgrade my mythbuntu box from lucid to maverick.
It crashed during the upgrade. On re-boot it now stops at a dialog telling me its running in low graphics mode because it cannot load/find the nvidia drivers. I am unable to close the dialog. No mouse, no keyboard.
ESC will not let me interrupt the boot to get to a recovery console.
View 9 Replies
View Related
May 2, 2011
After my computer crashed due to an electrical failure in the house, every time I try to boot up (I'm using Ubuntu 10.04) I get the following error:
mount: mounting /proc on /root/proc/ failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg.
I'm then put into initramfs
I assume that this is because the system wasn't unmounted properly but I haven't been able to find the best way to solve this problem.
View 2 Replies
View Related
Jul 9, 2011
I've downloaded both Kubuntu and Ubuntu and tried to install them. Both methods (wubi and cd).However I encounter the same problem, I think it's a graphic crash because I see some patern of pixels right after it loaded.I've made a pic (here) using my phone.However this problem doesn't occure in Ubuntu 8.04 (8.04 because I ordered some CD at that time).An option would be to install 8.04 then upgrade till the latest, but I'm worried about encoutering the problem right after that.Some specs:AMD Athlon II X4 3.0 GHz2 GB RAM DDR2NVidia 240GT160 GB HDD
View 2 Replies
View Related
Feb 18, 2010
on 9.10 system reported partial upgrade and after I let it do that (which was a BIIIIIG mistake) I can;t install nvidia drivers anymore.tried via Hardware Drivers and via Terminal
View 1 Replies
View Related
May 1, 2010
As the title says, i was in the middle of the upgrade, when the system froze then a black screen with the text similar to: starting apache ..... starting ..... ... in that way, but with more text, i could not remember the exact details. When i boot up, it say /dev not found, and other errors, and a weird black screen that seems to be loading modules appears, but never finishes and starts to act strange. Any way i can get this fixed without just copying my data and reimaging my partition.
View 2 Replies
View Related
May 1, 2010
Was running the upgrade through the manager this morning and the download got about 3/4 of the way and froze up making the system unresponsive I left this for an hour to see if it would resolve its self but no luck so as the installation hadn't begun I hit the power button. BIG mistake now when I try boot to 9.10 it hits a black screen with white ubuntu logo much like 9.10 but no loading bar. it just hangs at this now. I am currently posting this from a live usb I made from an ISO of 10.4 i downloaded on my girl friends windows machine. Is it possible to either fix the 9.10 installation or update the files on the 9.10 installation to 10.4 from the live disk(I have the option to make a 9.10 live disk if needed)?
View 4 Replies
View Related
May 15, 2010
Last night I switched from Lucid Ubuntu to Lucid Xubuntu. Whenever I switch on, I get a flash of several error messages on the boot screen; then few seconds when the screen turns all the colours of the rainbow, as if the display was damaged. Then it loads normally and seems fine.
This happened occasionally under Lucid Ubuntu, but don't recall it happening when I was using Karmic Ubuntu.
It doesn't exactly fill me with confidence, and might even goad me to dig out my old Karmic boot disc. Say it ain't so!
My laptop is an eMachines (acer) E625. But I doubt it is related to the hardware.
View 3 Replies
View Related
Oct 30, 2010
Today I was prompted to upgrade to Ubuntu 9.1, and then again to 10.04
Doing these upgrades wreaked havoc on my system. I have been able to fix most of the problems that were caused but I am having trouble finding information on the following:
When I boot up the system and after passing the GRUB loader, the system freezes up at the login screen and I have to power down.
If I hit ESC at the GRUB screen and choose Kernel 2.6.32-25-generic (recovery mode) and then choose "failsafe graphic mode", then I am able to log in to GNOME as normal.
View 1 Replies
View Related
Nov 28, 2010
During update my pc locked up and i shut it down. power button now ubuntu wont start up, it runs straight to busybox, windows starts and runs normaly. i have tried to do some simple fix with a live cd (ubuntu 10.10, the instaled verison is 10.04) but everything stops after a while in the terminal. have tried to install grub + update and upgrad with terminal live cd. have also tried to run the [URL].. but stops when it comes to the partiotn thats ubuntu is on (sda5)disk
have also tried to install 10.10 from the cd, just starts to loading after chosen install.anything i can do in busybox ? must i format the whole disk, including windows ?
View 2 Replies
View Related
Dec 8, 2010
I just tried to upgrade my server to the latest version of Bind9 and the process fails gets frozen.First note that I have Bind in a chroot jail.When I try the upgrade, or the recommended "dpkg --configure -a", it displays this then hangs:Quote:
Setting up bind9 (1:9.7.0.dfsg.P1-1ubuntu0.1) ...
* Stopping domain name service... bind9 rndc: connection to remote host closed
[code]....
View 2 Replies
View Related
Feb 20, 2011
Two attempts at installing, first with Ubuntu 10.10, now with Kubuntu 10.10. Both gave same results and error:
Code:
Traceback (most recent call last):
File "/usr/lib/ubiquity/ubiquity/frontend/kde_ui.py", line 949, in on_next_clicked
self.dbfilter.ok_handler()
File "/usr/lib/ubiquity/plugins/ubi-prepare.py", line 343, in ok_handler
[Code].....
View 1 Replies
View Related
