on 9.10 system reported partial upgrade and after I let it do that (which was a BIIIIIG mistake) I can;t install nvidia drivers anymore.tried via Hardware Drivers and via Terminal
View 1 RepliesI have a Dell studio running ubuntu for two years now. I had ubuntu 10.04, but a few days ago, the update manager started to bug me that some stuff don't work properly and that I need to to a partial upgrade. I postponed that for a while, and all worked fine, but I finally had sometime and clicked "yes", all began collapsing:
1) the update manager crashed while updating.
2) I rebooted and ran it again. same crash at the same stage.
3) I decided, god knows why, to do a full upgrade to 10.10, which also crasehd.
Now it won't even boot. It always get stuck at a line saying "no IPv6 routers present" or something of that sort. when I switch off manually the wireless switch on the laptop, the boot gets stuck a bit earlier, on a line that says: "laptop login:"
EDIT: I just remembered something which might be important: I had a hibernation problem on the upgrade to 10.04, so I played around a bit with that. now it uses libgcrypt, and I remember I set up something manually then, but I can't remember what.
This was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.
I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.
I have an older Dell Inspiron e1505. The hard-drive went bad years ago and I look to revive it. I purchased a new hard-drive and proceeded to install Windows XP Pro that I have a partial install of XP professional but do not have the key. Microsoft explained because I cannot find I would have to buy a new one instead of keeping my key within their Microsoft store. So instead of purchasing a new key I would like to install the latest version of Ubuntu and go the Linux route.
I downloaded the latest version(non pc I believe) and have it booting of the Cdrom. I am now stuck because it bypasses the cdrom /disk and starts to load XP home again. Will continue to research as I move forward but would definitely like some pointers on what I can do as far as removing the partial install of Windows XP home.
I have an e-machines computer model EL1200-05w, I believe my Graphics card is a 6150SE, what happens is that often about 3 or 4 times a day my computer displays horizontal stripes and the computer freezes completely and have to shut down the computer manually, this does not happen on Windows and have tried Fedora and Kubuntu with no avail, I do not know if it's a Kernel Issue or the graphics card. I have searched extensively and have found nothing. I'm using Ubuntu Lucid Linx by the way.
View 6 Replies View RelatedUpdate Manager gave the following message:
Code:
Not all updates can be installed
Run a partial upgrade, to install as many updates as possible.
This can be caused by:
* A previous upgrade which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
[Code]...
Today I tried to upgrade from 10.04 to 10.10. It got through probably 50% of the install and then everything froze. I had to hard restart the computer, but when I try to boot to ubuntu, it just gives me a prompt and acts as if everything is wrong. I have tried a few things (sudo dpkg -configure -a; sudo dpkg -reconfigure; etc..) but it all seems to lead back to the prompt with no success. Is there anyway to recover my upgrade? Do I have to resort to a reinstall of ubuntu and lose all my data?
View 9 Replies View RelatedI recently tried to upgrade Ubuntu with some new updates but I get this Also if I can't fix this then is there a system restore type function for Ubuntu?
View 1 Replies View RelatedI have a compaq nx7010. It started out with 8.04 or perhaps 8.10. I upgraded it through to 9.04 when that became available. I have not upgraded to 9.10 year, because I recall it took me a fair amount of time to get my system working correctly after the 9.04 upgrade. At a guess, audio went down, wifi broke, and that sort of thing. I am now finding that apps I use are not releasing new versions compatible with 9.04. And I see 10.04 is on its way, and I understand it is best to go from one upgrade to the next rather than jump a release.
Here's my question:
I get the impression it is cleaner and more stable to do a clean install as opposed to an upgrade. I've also seen many people expressing that view. I've always just gone with upgrading because I didn't like the thought of having to set my whole computer up the way I like it, again. Is there a way to do a clean install that will keep my system the way I like it? For instance, to not have to reconfigure every application?
I have my partitions set up like this:
ext3 /home
ext3 /
linuxswap
Just how much config related stuff is stored in the /home folder? Or is this purely user files? What is the consensus? Is it better to upgrade or to do a clean install? My intention is to have a stable system that does not require hours of my time to get sound and wifi working, with the latest release on it (so that I can run the latest apps).
I did partial upgrade lately and now I can't install any software.
the message I got is
software index is broken it is impossible to install or remove any software. please use the package manager "synaptic or run sudo apt-get install -f
if I follow the messages i receive from the system i will end up with the system hanging when trying to replace mysql-server-5.1
Code:
reconfiguring packages ...
(reading databse ... 199488 files and directories currently installed.)
preparing to replace mysql-server-5.1 5.1.41-3ubuntu12.1 (using .../mysql-server-5.1_5.1.41-3ubuntu12.3_i386.deb) ...
Just wondering if anyone else has this partial upgrade being offered to them: ffmpeg, libavdevice52, libpostproc51, libswscale0 are held back (grayed out) in Update Manager.
I only use Update Manager manager to see if there are any updates and then use sudo apt-get update, sudo apt-get-upgrade and sudo apt-get dist-upgrade to actually examine the updates as it shows if anything will be removed without anything to replace it.
And I know to never do a partial upgrade.
Update Manager displays "Partial Upgrade" with the files listed above grayed out.
I did use sudo apt-get-upgrade to install a few packages earlier that were safe to install and now -
sudo apt-get-upgrade currently gives this output:
Code:
The following packages have been kept back:
ffmpeg libavdevice52 libpostproc51 libswscale0
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded
[Code]....
I have Ubuntu 8.04 (32-bits) installed on /dev/sda and Ubuntu 10.04 (64-bits) installed on /dev/sdc (this is an update from 8.04 64-bits originally installed on /dev/sdc). There is a grub on each of these two disks. Both are the old grub (prior to version 2). Here is the top kernel listing from /dev/sda:
titleUbuntu 10.04 LTS, kernel 2.6.32-24-generic (grub sur unite1)
root(hd2,0)
kernel/boot/vmlinuz-2.6.32-24-generic root=UUID=761c3d13-cc55-4117-934f-693766e122b6 ro quiet splash locale=fr_FR
initrd/boot/initrd.img-2.6.32-24-generic
quiet
[Code]...
I am using the latest Ubuntu 10.04 Lucid lynx. Sometimes ago while I am updating my operating system to linux-image-2.6.32-25-generic (2.6.32-25.44) with update manager, after downloading all the files it was running the installation. During installation suddenly my pc turned off, may be for some power issue. Then while I again start my pc and tried to restart the update process the update manager show me a message. "Not all updates can be install. Run a partial upgrade, to install as many as updates as possible."
This can be caused by:
* A previous upgrade which didn't complete.
* Problem with some of the installed software.
* Unofficial software packages not provided by Ubuntu.
* Normal changes of a pre-release version of Ubuntu.
Then I tried to open the synaptic package manager. But it didn't open either and show another message which suggest to run the command in the terminal: "sudo dpkg --configure -a". And unluckily it wasn't work. and show the messgae:
"dpkg: parse error, in file '/var/lib/dpkg/updates/0103' near line 0: newline in field name `#padding'".
I'm using 10.04.2, and I find that whenever I'm trying update (whether using synaptic, or command-line apt-get), the package download starts off fine, but after downloading a few files (usually only 4 or 5), the next partial (ongoing) downloads become corrupt, all the remaining downloads stay in the partial folder and finally apt-get gives a size mismatch error .I'm forced to watch the update progress the entire time and wait for the downloads to corrupt (at this point the progress bar stops at say, "Downloading file 4 of 70" but the details show subsequent files are being downloaded)the update process and clean the /var/cache/apt/archives/partial folder (NOT the archives folder, or all the packages will have to be downloaded again). Then I restart the update and it picks up after the last successfully downloaded .deb.
Effectively, every such iteration downloads 3-5 .deb files successfully, and corrupts the remaining. Needless to say, if I'm upgrading 50 packages, it gets really frustratingI faced this problem even on new installations on my system as well as a friend's. Lucid, Maverik, Natty all have the same problem. By new installations, I mean on the very first boot, I setup the network (I'm behind a proxy server in a university) and that's it. I tried Linux Mint and it had the same problem.
Nothing happens at all and I can't locate the executable file
I use the 64bit edition of 10.10. Tried total removal and re-installation from Ubuntu Software center but no joy.
I am trying to get the talked about Unity netbook shell through my Lucid installation. When i add the repository Code: ppa:canonical-dx-team/une i am offered a list of packages for upgrade which system says is also a partial upgrade. I know i should not be accepting a partial upgrade since it runs the risk of breaking my Lucid install itself - so i have not. How do i not reject these partial upgrades due to the repo addition & still install Unity?
View 3 Replies View RelatedCould not calculate the upgrade An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. I wanted to attach the log files; YOUR FORUM RULES WOULD NOT ALLOW ME TO AS IT SAID FILES TOO LONG!
I've had a working desktop even running compiz just before I updated today. Anyway, after the reboot which was required after my update, I got a notification in the boot message which says:
Code:
Checking for module nvidia.ko: [FAILED]
nvidia.ko for kernel 2.6.30-9-96.fc11.x86_64 was not found. [WARNING]
The nvidia driver will not be enabled until one is found. [WARNING]
I continued logging in and got a white screen (most likely brought by compiz without the nvidia drivers). I hit terminal and disabled compiz then tried to see how nvidia is doing. Here's what I got from nvidia-xconfig:
Code:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
and finally here's what /etc/X11/xorg.conf contains: .....
i have installed nvidia driver, but after yum update not work anymore
fedora 12, nvidia 6200
output:
Code:
MPlayer SVN-r29800-4.4.2 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
[Code]....
I finally got the basic 2D working again on my laptop using the updates-testing stuff. But using 3D (glxgears for example) still make my machine to crash. Also, I get weird kernel panics when trying to configure the nvidia:
[code]....
I got a notification that there was an upgrade available today in ubuntu 9.10 64, after the update i restarted my system and while booting i encountered this error message:
Kernel panic - not syncing : VFS : Unable to mount root fs on unknown - block (8,17)
does this have something to do with the OS looking at the wrong hd?
theres no command prompt to actually do anything and i tried booting in safe mode and had the same problem. Let me know what i can do!
It's been mentioned several times in this forum already that downgrading to NVIDIA driver version 256.53 can solve random-seeming plasma crashes (the error dialog box usually mentions a "floating point error").So, I upgraded openSUSE 11.3 to KDE 4.5.5 today and couldn't add a clock - any clock - to my desktop or panel without a plasma crash. I had been using the latest NVIDIA kernel modules (v260.19) from the openSUSE NVIDIA repo. I uninstalled them, installed the gcc, make, and kernel-devel packages, and manually installed the latest NVIDIA driver (270.18). No joy; same crash. So I installed version 256.53. And...it solved the problem.
So, to underscore the point, if you have a recent NVIDIA card and you're having random plasma widget crashes, try downgrading your NVIDIA driver.
I have an Emachine that my uncle gave me and I thought that Ubuntu would find a nice home in the cozy case and well.....
I have a Emachine el1200-05w AMD Athlon 64 2650e / 1.6 GHz NVIDIA GeForce 6150 SE 2.0 GB mem. and 160GB HDD
I had to fight to get it to install kept freezing and stopping. I finally got it installed. It runs fine and is fast. I like it alot and then after about 5 to 10 min. The screen locks up or will distort in multicolor stripes across the screen. I cant figure out whats going on!
I did just notice that the specs say it's a 64bit possessor and I'm running the 32bit ubuntu will that make a difference?
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies View RelatedI have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
I was clean installing Ubuntu 10.04, and for some reason my machine crashed during the final stages (has been a bit unstable recently), when running the init scripts I think. As a result I think that some programs are not being run properly. For example, cups is never running - I have to start it to use printers. And CDs dont mount automatically. Here are the services states:
Quote:
~ > service --status-all
[ ? ] acpi-support
[ ? ] acpid
[ ? ] alsa-mixer-save
[Code]...
What can I run to clean this up and get things to how they should be? Dont suggest re-installing - I have no time for that and it might crash at the same point.
I use ubuntu lucid lynx, LAMP (mysql 5.1 and last php) and tried to install the package from mysql web page (mysql-connector-odbc-5.1.7-linux-glibc2.3-x86-32bit.tar.gz) through alien. Terminal output is as follows:p { margin-bottom: 0.21cm; }
sudo alien -d -c -k -i mysql-connector-odbc-5.1.7-linux-glibc2.3-x86-32bit.tar
dpkg --no-force-overwrite -i mysql-connector-odbc_5.1.7-1_all.deb
(Lendo banco de dados ... 147517 arquivos e diretios atualmente instalados).
[code]....