Ubuntu Installation :: Loading Mint On Laptop Through USB?
Jan 25, 2011loading Mint on laptop through USB?
View 2 Repliesloading Mint on laptop through USB?
View 2 RepliesI am running Ubuntu 10.04. But since it seems like future versions after 11.04 will be Unity desktop only, I have been exploring other versions. The one I prefer is Mint. But it will not load on my desktop computer and here is the problem: I downloaded and burned the program 4 times (!) suspecting that there could be a bad disk. But since there were no problems using it on another computer, I thought it could be the video on my machine, but putting in another video card made no difference.
But last night I woke up realizing what could be the key. When I try to boot up the disk I get the following text:
ISO LINUX 3.36 2007-02-10 copyright 1994-2007 H Peter Arvin.
What I suspect is that the computer reads this file from the hard disk before turning to the CD, and that file is the problem. In other words, something in my Ubuntu installation blocks the Mint Cd from loading.
I was using linux(mint) about 6 months without problem, then after a 2 months break i installed linux mint again, but everytime it crashed after a few hours(like 2-5 hours). So i tried to install linux mint debian but it crashed during installation, so tried openSuse and ubuntu but both the same result-everytime crash after a few hours.
(it crashes when browsing internet, writing in gedit,watching movie...just everytime it crash no matter what i do) Temperatures are ok, i checked RAM with memtest, also S.M.A.R.T but seems OK. I have dualboot with windows 7 and windows doesnt crash like this, it can run days without crash.
my laptop is ASUS n61-vn
when it crash i have to hold down power button, or alt+sysrq+reisub
I have Toshiba Satellite L305-S5907 laptop with Microsoft Vista.I tried installing Fedora 9 on my laptop but GUI is not loading on it,system will try to load GUI and showing different colors of lines and screen blinks continously , but desktop is not loading .
Laptop Monitor specification is 15.4� diagonal widescreen TruBrite� TFT LCD display at resolu1280x800 native resolution (WXGA).Except GUI everything is working fine.I tried startx command but then also same scenario is happening. Graphics details: Mobile Intel Graphics Media Accelerator 4500M with 128MB-1759MB dynamically allocated shared graphics memory
I did was install MInt 9 on it. Everything is going well except no sound at all. Not even the 'start up chime' of any music/videos. I have the volume buttons working on the laptop and I have checked sound preferences and nothing is muted. I did not dig much further as I have learned with mint and ubuntu that can create problems. This is a fresh install and no sound from the get go. How should I proceed to trouble shoot?
[code]....
I cannot get wireless to work on my friends HP Compaq 6735s Laptop with Linux Mint 9. The wireless button is lit up. I can use my Desktop USB wireless adapter alright.
View 6 Replies View RelatedI got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies View Relatedi have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
View 2 Replies View RelatedI started to install Fedora thinking I was just going to place it in the / and /home partitions I already have but the installer only seems to give me the option to use the whole disk.I have 3 / and 3 /home partitions 2 of each are occupied by Linux Mint and Mint KDE so I wanted to use the last / and /home for Fedora.
View 6 Replies View RelatedI have a laptop with important data (no backup) that will not boot. It's a vanilla Debian 6 amd64 with dm-crypt LUKs encryption to a internal sata drive partitioned sda1 sda2 sda5 with lvm2 formatted ext3 for sda5. The symptom is that upon powering up, it progresses (albeit slowly now) past grub, to the point where the the "Enter passphrase" prompt occurs. After entering the phrase, it pauses with "Reading all physical volumes. This may take a while". It seems to work, but then gives me errors like:
ata3.00: status: {DRDY ERR }
ata3.00: error: { UNC }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: failed command READ DMA EXT
...some more stuff...
end_request: I/O error:, dev sda, sector 308725410
JBD: Failed to read block at offset 24711
EXT3-fs: error loading journal
and it drops me to Busybox ash shell. My impression is that the sda1 partition with the kernel is intact, but the sda2 or sda5 is bad.
What else I have done:
1. Removed problem disk and installed it into another known good laptop. Issue occurs with new laptop. So, I would assume hd is bad, laptop is good.
2. Booted from hd using grub rescue mode. Similar errors occurred.
3. Using suspect laptop and hd, booted into a live cd environment, which attempted to mount the encrypted drive. It prompted for the passphrase, but said it could not mount the drive.
it stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
View 2 Replies View RelatedAll of a sudden my laptop decided to not bootup. It stops while loading syslogd. I started up in single user mode and added a few echo statements in rc.syslog so it looks like:
Code:
This means that execution of the script doesn't seem to get past the "/usr/sbin/syslogd" line. Well at least thats the case in the first 2-3 minutes. Afterwards my screen gets flooded with the next echo I placed "caught in the loooooop!".
Again, stating the obvious, the script reads on and gets caught in the while loop. obviously there is no /dev/log and something must have messed up the execution of syslogd. what could that be it?
Recently I was fiddling around with jackd and trying to setup a jack-rack on my laptop. To do that I had to recompile alsa-driver from scratch in order to include the virtual soundcard driver. I also had to rebuild the mainline kernel to add low-latency (I did not switch to kernel-rt). Overall, I've been running with a custom kernel more than 2 months now and never had a problem with syslogd startup. The new low latency custom kernel is just like the previous one but with only difference the low latency setting. With the low latency kernel I've been using the pc for approx a week and have done 5+ reboots. So the problem appeared now out of nowhere...
If I disable rc.syslog and I start the pc, and then start it up, syslogd with execute nicely and quickly as if there was no problem, ever...
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View RelatedI burned the ISO of linux mint 9 isadora xfce onto a CD(the live version) and when I booted up for the very first time it asked for a username and password, what am I supposed to put in there? Also, should I have my ethernet cable plugged in for the installation of the OS, or is it fine to do it with no internet connection?
View 4 Replies View RelatedI am running Mint 8 KDE 64-bit edition, which is very nice by the way. Last night I tried to run the upgrade to lucid, but it did not commit any changes, and the version is still listed as Mint 8 Helena, which is based on Karmic. I am guessing the Mint guys have set apt-get to look at the Mint repositories rather than Ubuntu.What do I need to do to bring my system up to version 10.04, including Gnome 2.30 and KDE 4.4.2?
View 2 Replies View RelatedIs it possible to migrate from Linux Mint 11 to Ubuntu 11.04 without reinstalling the whole system, i.e. as if it was an upgrade from a previous version from Ubuntu. I would like to avoid having to reinstall and reconfigure all the applications I installed in Mint.
View 2 Replies View RelatedI had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies View RelatedRecently installed Mint (Julia) alongside Ubuntu Remix and I want to uninstall UNR completely and re-install.
View 2 Replies View RelatedI have a very infuriating problem. I recently got a new computer and I wanted to put Mint 8 on it (as I already use it on my laptop). I tried to boot the live cd and the screen displayed the ISOLINUX version and then just went blank. After a few attempts I gave up and put in a Fedora 12 live cd I had lying around and it booted and installed without a problem. I really would prefer Mint to Fedora but it still refuses to boot from the Mint live cd. Is there any way I could install Mint from within Fedora? I want to use Fedora's partition for Mint.
View 9 Replies View RelatedI admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
[Code]...
I would like to run Linux Mint fullversion from a flashdrive. Is it possible and easy to set up. I have found how to basically create a flashdrive version of the live cd, but I would like to run the full version from the flashdrive.
View 7 Replies View RelatedI'm new to the world of Linux, but am intrigued by the variety and functionality it offers over Windows. I have an external HDD from which I would like to dual boot Linux Mint, with Windows Vista (64 Bit) remaining on the primary internal HDD. I know that my BIOS supports dual booting and booting from USB devices (my external HDD). Are there any specific dangers I need to be aware of? Is it as simple as putting in the installation disc and selecting my external HDD?
View 9 Replies View Relatedhave my workstation dual-booting Mint 7 and Windows 7. I had no problems installing either OS. But now I need to run some software that just won't run on Win7, not even in compatibility mode. So I have to use XP. So I installed XP Pro on a 1TB drive connected by eSATA. Again, no problems with the install, smooth and easy. BUT, and I'm sure you know where I'm going with this, XP jacked up the booting. I lost the grub menu, of course, and I had a hell of a time getting my system back to where I started. I removed the eSATA disk (with XP on it) but could not use the standard grub fix (find /boot/grub/stage1, root(hd0), etc, etc.). I used the Win7 repair utility and that restored my ability to boot into Win7. I then was able to use the grub fix and was back to square one.
I tried adding XP to the menu.lst (using the correct hd address and all) but when I selected XP from the grub menu it said BOOTMGR was missing. I'm assuming Win7 wiped it out when I ran the win7 repair utility.So, does anyone have any idea how I can "easily" boot XP from the eSATA disk? I've searched the forums here and I think my scenario is a bit different than other tri-bootonfigurations.I can't install the drive in the workstation because there are no more slots left for an HD to fit. So it has to be eSATA.
I want to install Mint 9 KDE but I need to specify some installation parameters. I need to set the default filesystem as EXT3 so I can create a disk image with Acronis True Image that doesn't support EXT4 yet.
I've done the same with Ubuntu Server 10.04 by including the parameter 'partman/default_filesystem=ext3' at the installation console. I know Mint 9 Gnome can also be installed direct from the CD, but the KDE Live DVD doesn't give me any such option - just the desktop installer.
How do I customise the installation of Mint 9 KDE?
when I was first trying out Linux and installing Partitions, I did it right, but I used 200GB of Space, and so I decided I didn't want to use it VIA Partition and I wanted to use it VIA Wubi... and I didn't know the correct way to uninstall it... So I went to Windows Partition Manager and manually deleted the partition myself with the OS in it, but the thing is, it turned into 200GB of Unallocated space, and I couldn't give it back to my C: so it's just there... and now, a month *Present day* I want to install Mint 10 KDE and now... The big problem... I can't assign Linux Mint 10 to the unallocated space, only to the rest of the HDD... how do I assign it to the "Free" space? I tried "Specify Partitions Manually" but there was nothing that showed up. What would happen if I assigned negative 19% for Linux? Would it cause negative effects?
View 3 Replies View RelatedI have a separate /home folder.
Will my user preference files still function after installing to sda2 or should I wipe /home and start over. ?
I hate the thought of chasing passwords, add ons ect.
I have install linux mint 10 on my system.After all installation finish,the screen resolution is stuck at 800 x 600(4:3).No matter how I try,just could not set the screen resolution to 1024 x 768. Below is system information for your kind assistance.
-Computer-
Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
Memory : 765MB (254MB used)
Operating System: Linux Mint 10 Julia
User Name: oem (oem)
-Display-
[Code].....
Bit new to linux but what i saw with gloria in my opinion was a better os than windows. Just done a fresh install with helena on my sata drive and a dual boot with xp pro which is on my on my ide drive my problem is on boot I get to grub loading then boot hangs for 5 minutes before the dual boot screen appears and when it does I can not move up or down to select any options eventually however helena does start.
View 7 Replies View RelatedWhen i boot its all ok i press enter for instal ubuntu and than the normal screen When it finishes loading i get a random mashup of my windows desktop.
View 1 Replies View RelatedI have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
View 2 Replies View Related