So I'm a newb to ubuntu and I have two desktops I just had wiped clean, there is nothing on the drives. I DL the latest version, burned to CD and tried to get the machines to boot the CD so I can install the software.
I get nothing but reboot retry press F1.
I wrote a GRUB multi-boot configuration so I can boot multiple distributions and have storage space on one 32GB flash drive.
set imgdevpath="/dev/disk/by-label/multiboot"
Code: Select allmenuentry 'Debian Jessie amd64' {
set isofile='/iso/debian-8.0.0-amd64-DVD-1.iso'
loopback loop $isofile
linux (loop)/install.amd/vmlinuz
initrd (loop)/install.amd/initrd.gz
}
This works in virt-manager when I boot the physical usb device a virtual disk with a usb bus and it works flawlessly, but when I plug it into a physical machine the cdrom detects fails to mount /dev/sdb1 as fstype=iso9660.
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies View RelatedI've installed a virtual machine on my computer. and I want to boot from its hard disk(which is on my /home/xen/domains/test1/disk.img). what I need is create a grub entry for this.
View 11 Replies View RelatedWe are giving away 20+ machines to 3rd world county and I was asked from the receiving party to install linux on them. What I don't want is to pop a cd into all of them and do the manually install.
I'm thinking of installing one computer the old fashion way and do the OEM-configuration on it afterwards. It would be nice to just clone the hard drives since the computer is identical right down to the hard drive.
I just inherited a lab full of computers currently running XP and 9.10. They all worked when I last saw them. Recently, tech support re-imaged the XP partition and now I can't boot into Ubuntu. Obviously it overwrote the bootloader that was there, but I can't get it back. The general setup is XP on /dev/sda1 and Ubuntu on /dev/sdb1 with swap on /dev/sdb5.
I've followed a bunch of instructions about reinstalling grub by chrooting into /dev/sdb1 (right? that's the one I should use), grub-install and update-grub all run without a hitch detect both Ubuntu kernels, memtest and the XP install as they were before the reimage. Exit and reboot, it still boots straight to Windows. If I move the boot flag from sda1 to sdb1, the computer hisses at me about not finding anything to boot.
I've gone nuclear on one computer and installed 10.04 on sdb1, but it still boots to Windows. I feel like I need to do something to the MBR on the Windows drive but last time I did anything there I had to fix it with ms-sys. I left out anything wicked important, I'll get what info you need. Oh and if upgrading to 10.04 in a trick fashion will help me, by all means suggest it, because once they get going I'm upgrading anyway.
I do some volunteer work repairing and re-purposing older computers for the Salvation Army Thrift store where I live. Of course most of the computers we get are older. My reason is to get some of the poorer kids a fighting chance at school. We sell these things for next to nothing to accomplish this. I include free tech/training support for 30 days to get them started as. My problem is that finding a version of ubuntu and openoffice that will run on them is becoming difficult. Any suggestions as to a version that works for those not real familiar with computers?
View 7 Replies View Relatedif I need to install Linux o/s in 50 or 100 machines, how do I do it ? (lets imagine that all the machines are identical)
Is it possible to install in one of the machines and just clone in all of the other machines (without actual installation). If so , how do i do it ??
I have VMware player on my laptop. I have three working virtual machines, Android, Windows Vista, and Kubuntu, and three that something went wrong don't work. How do I get rid of these space cloggers? Just go to Home folder/VMware and jus delete the folders of useless machines? Or is there a way to do it properly? Or am I stuck with these forever? And how do I rename a virtual machine?
View 1 Replies View RelatedI have tried to boot from Fedora 10 CD on Compaq Evo D510 desktop as well as HP Pavilion DV6700 Laptop several times. Goes through everything for a long time. Ends up in a screen with colored stripes on the desktop and a blank dark screen on the laptop. I do see the wireless light on the laptop turn blue from orange indicating it is enabled. But was of no use. Both machines crash at the end. I tried both GNOME and KDE.....both crashI am suspecting the display drivers. The desktop has a Intel Chipset and the laptop Nvidia GForce 8600 I guess....These are not old comps. The desktop is just a couple of years old and the laptop is brand new. This is without actually installing Fedora
View 5 Replies View RelatedI have now got three machines with Debian on in my home. I use Mobile Broadband with a very modest monthly limit and remember somehow using Synaptic to gather either Updates or packages to download on one machine where there was another type of internet and could then move the packages back to my computer. Can anyone here remind me of what I would have done there or suggest a means of getting these three updated without blowing my limit. I'd either use a relative's broadband and my netbook, or do the Updates once at home and move the packages to the other two machines.
I'm using Debian 6.01, Gnome edition, 64 bit, on an Atom N450 netbook, a 3ghz dual core AMD pc and a a 2 ghz single core AMD pc, whatever of this is relevant. They have slightly different programs installed but are at the same stage of not being updated yet, with 252mb of them to add.
I'm planing to get 4 dedicated, remote servers for my start up, the question I have is: how to do only one installation and then duplicate or clone this installation into all the other machines. I could install those 4 servers manually, but the problem is - we have a lot of things that our application needs, and later there will be more servers. So an automatic way to do that would be better. We are using Debian. Perhaps there's a way to create a "big package" that will contain all of the necessary software in it, then simply require from the hosting provider that all of our servers come with Debian installed, and then manually upload the "big package" and install it?
View 3 Replies View RelatedI have three Ubuntu desktops that I would like to upgrade from 9.10 to 10.04. Is there a way to avoid having each PC download the same packages? Is there some magic I can do with two of the PCs to maybe point the software source list at the third 'master' PC that does all the downloading?
View 2 Replies View RelatedI've been having some problems trying to get a new netbook working with China Telecom's 3G service (works wonderfully in Windows, but still trying to figure Ubuntu out), so until I figure out the problem with this Huawei modem, I've written a quick python script to handle updates/installations on the Ubuntu side. (Synaptic does fine on generating download scripts for packages, but it needs an option to handle updates as well)
If anyone else has a use for this, you're welcome to use it. Please let me know what needs to be changed to make it work on your box.
I have a home network with 6+ x86_64 machines, all with similar setups. In the past (FC10 and before), I've had common package repositories (e.g /var/cache/yum/fedora/packages) shared via NFS with all the machines (and with keepcache=1 in /etc/yum.conf). That way, a given RPM only got downloaded once; the other machines would then pull it from my local package repository. And I don't mind the disk usage of keeping one copy of all my old RPMS around.
It seems that while DRPMS is great for a single machine, it doesn't make sense in my case. If I have to download the DRPM 6 times (and take the time/CPU hit to recreate the RPM 6 times), I might as well have downloaded the RPM once and been done with it. Is there a not-too-convoluted method to keep a common package repository across multiple machines even with DRPMS? Or, better, to have that first downloading machine pull a DRPM, generate the RPM, then save the RPM in the local shared repository?
I am trying to get preseed working on a bunch of machines with multiple NICs but it doesn't pick the right interface and/or gets "no link" on all interfaces. My PXE kernel line looks like so (I have auto=true priority=critical and interface=auto)
label squeeze
kernel debian-installer/squeeze/i386/linux
append vga=788 initrd=debian-installer/squeeze/i386/initrd.gz auto=true priority=critical ramdisk_size=10800 root=/dev/rd/0 rw url=example.com/d-i/squeeze/preseed.cfg interface=auto netcfg/dhcp_timeout=60
[Code]...
we are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
I wish to setup a network that works like windows but for with lunix of course!. It will need to be able to handle security/DNS/DHCP & Document store from one location. I've been doing some reading and have found that I think I need to be using one of the following:
LDAP
NIS
Kerberos
I have looked at a few Linux based OS's. I did notice that when you install fedora live desktop it gives you the option to connect to one of the above. So I am looking for a complete solution.
1. How to setup fedora to act as server for my needs (or other Linux build)
2. Add fedora/linux mint machines to server to use new security settings. (or other linux build)
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
I just installed ubuntu 10.04 x64. I have installed it and set it up the way I like on my server, however I now have 3 terminals and a laptop to set it up on the exact same way. As a result Id like some advice on what can and cant be done and how. Preferably I am looking to use programs with GUIs. Thing the style of ubuntu one, software manager etc, not really too into the command line, or conf editing unless there is no other option.
1. I installed all the software from software centre I like. Now I need the same software on the other computers. I know mint has mintbackup where it just exports and imports a list if installed software. I am looking for an ubuntu equivalent.
2. Firefox and Thunderbird add-ons. I install like 20 firefox and thunderbird add ons. sometimes I can't even keep track of them. There must be a way to sync them so that each computer I install ubuntu on I can simply import the list of mozilla add ons and have it auto download them.
3. Mail Contacts and Calender Syncing. I need to sync between my 3 ubuntu machines and my windows mobile 6.5 device for calender, email/phone/name contact lists. Email is taken care of by imap, but lightnings calender isnt and neither are the contacts. If I input a contact on my phone I want it to sync to the other computers I use.
4. Ubuntu one. I have /storage/workfolder in my root directory on my personal server. I want to be able to work on documents at work on my laptop and sync them so that when I get home, they are synced on the server without causing overwrite changes etc.
5. Desktop settings, icon themes, preferences from ubuntu tweak etc. I know this one is a bit more of a long shot, but it takes 20 minutes each computer, to set up the little maximize minimize buttons on the other side, set up cairo dock the way I like, install the icon theme and backgrounds I like. isnt there a way to back this up so it doesnt have to be done each time or so I can make my other computers the same?
Problem: Neither Ubuntu 10.04 Lucid Lynx 64 bit machine can access any shared folders on windows PC's, or on the other Ubuntu machine. However, my windows machine CAN access the folders I've set up to share with Samba.
When I click Places>Network it FINDS the other computers, but when I double click one of the other machines the "wait" pointer comes up and then it says: blah blah blah... "The folder could not be displayed: Sorry, could not display all the contents of "Windows shares on debbie-desktop": DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Why can the windows computers access shared files FROM linux, but the linux computers can't access anything non-local?
I have two folders on different linux machines and want to synchronize both. Please suggest to handle this issue.
View 1 Replies View RelatedI have a WD My Book Essential Edition hard drive that has 500GBs of storage that I want to use with ubuntu and my windows machines in my house. The drives are preformatted with NTFS. Does ubuntu natively support read/write of NTFS hard drives?
View 1 Replies View RelatedI have a DNS server on my LAN at 192.168.140.25. Going by the example in the O'Reilly DNS and BIND book I bought, I set up the domain movie.edu and toystory.movie.edu. To my great surprise and delight, I can access toystory.movie.edu in a browser from another PC on the LAN (as long as I add 192.168.140.25 to the DNS servers). Encouraged by this victory, I decided to try to set up another subdomain at coupon.movie.edu. This kind of worked but not completely. Interestingly, I can get to both toystory.movie.edu and coupon.movie.edu on my server, but on my PC, I can only get to toystory.movie.edu, not coupon.movie.edu.
Here is my db.movie.edu:
Code:
$TTL 3h
movie.edu. IN SOA toystory.movie.edu. al.movie.edu. (
1 ; Serial
3h ; Refresh after 3 hours
1h ; Retry after 1 hour
1w ; Expire after 1 week
1h ) ; Negative caching TTL of 1 hour
movie.edu. IN NS toystory.movie.edu.
movie.edu. IN NS coupon.movie.edu.
;
; Host addresses
;
localhost.movie.edu. IN A 127.0.0.1
toystory.movie.edu. IN A 192.168.140.25
coupon.movie.edu. IN A 192.168.140.25
And here is my named.conf:
Code:
options {
directory "/etc/bind";
};
zone "movie.edu" in {
type master;
file "db.movie.edu";
};
zone "140.168.192.in-addr.arpa" in {
type master;
file "db.192.168.140";
};
zone "0.0.127.in-addr.arpa" in {
type master;
file "db.127.0.0";
};
zone "." in {
type hint;
file "db.cache";
};
#include "/etc/bind/named.conf.options";
include "/etc/bind/named.conf.local";
#include "/etc/bind/named.conf.default-zones";
i've been trying to network my machines together, 3 to be exact, without using SAMBA, as there is no point using SAMBA as there are no windows machines on the network at all, have tried using the standard network admin GUI's and following some guides, without success, what is the step by step procedure for creating network shares linux-linux only networking, regards
View 5 Replies View Relatedi have ubuntu 10.10 on my laptop and in my desktop 10.4 how can i share the folder on my desktop so i can be able to pull them from my laptop.
View 4 Replies View Related