We are giving away 20+ machines to 3rd world county and I was asked from the receiving party to install linux on them. What I don't want is to pop a cd into all of them and do the manually install.
I'm thinking of installing one computer the old fashion way and do the OEM-configuration on it afterwards. It would be nice to just clone the hard drives since the computer is identical right down to the hard drive.
I have a busted XP notebook, no CD, no boot from USB. I have the option of booting from network, my provider wants to charge me to set up a static IP address I'm hoping to just plug in to my working 8.04 install with a cat5 cable or through a simple workgroup switch & get the basics installed where would I find such a procedure?
the gateway notbook hangs, part way through the restore [xp] process, I can only get to bios & restore, no dos prompt I don't care about any of the info or having XP I know the HDD may be bad
I have my Mythbuntu 9.10 environment installed on an old 160GB PATA disk and have just purchased a new 64GB SSD that I want to transfer my installation to.In the past I've just used ddrescue to clone disks, however in this case the source disk is larger than the destination disk so it won't work. I only have a few GB of actual data on the 160GB disk, so the 64GB SSD is definitely going to be enough for me.
I guess I need someway of either cloning so that only the actual data and not the partition is brought across, or possible shrinking the partition(s) first on the source drive and then using the same ddrescue method I've used in the past.Just looking for some assistance on what method is the best/most reliable?
I would like to replace my old 100gb boot drive in my server with a new SSD...for obvious reasons. So what is the best way to clone the existing installation (10.04 desktop) from the old boot drive onto the new SSD? I have read some guides online that suggest using the live CD and various software packages but most of them say it will only work if you are cloning to a disk of the same size or larger, nobody seems to address taking an installation from a larger volume down to a smaller one - in my case a 100gb IDE onto a 30gb SATA SSD.
As this is a datadump, the only drives I really care about are the various 1.0/1.5tb drives that actually store the data, the OS drive contains nothing more than the standard OS, samba/webmin and a few monitoring tools. So I guess it's not the end of the world for me to start fresh and install 10.10 next week, but I would like to know for the sake of this upgrade and future ones if anyone can be of assistance. basic specs if needed: Athlon64 X2 3800, 2gb DDR500, Asus A8N SLI Premium (Nforce 4/Silicon Image 3114R RAID controller). OS is on a 100gb IDE (WD1000BB-00C) and I would like to toss it on a Kingston 30gb SSD (SNV125-S2/30).
I bought an 1tb hard disk today and cloned my old 160gb ubuntu install to the new disk using gddrescue (from this tutorial [URL]) and everything worked fine. The problem is that I can't resize my home partition to fill the rest of the disk. I've tried using a live-cd and booting from my 160gb hard disk but I still can't resize the partition.
Here's the "sudo fdisk -l" output:
Quote:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]......
Basically I have setup and configured a CentOS 5.6 system on one server, and will be getting a brand new server in about a months time I was wondering if there was a way to clone a system from one server to another so I don't have to add all the users again, the config files are not a issue as I can just copy them over, but having to re-do all the user accounts, smb accounts and folder permissions will be a pain.
View 3 Replies View RelatedThe company I work for use Ubuntu on the PC's that control the system they manufacture. To simplify and speed up the OS install we use a standard PC (all the same hardware) and install a disk image on each system. The disk image was produced from one of the systems and the network settings were set to use a Static IP
However every time we clone a system the network settings change from the static IP settings to Roaming Mode.
why this happens or if it is possible to have the static IP settings remain after the clone?
I have read several manuals and online html on how to clone a partition to a greater one, I am still not sure about what to do.
Code: Select all# df -k /srv /usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md5 38445384 195236 36297128 1% /srv
/dev/md3 8648896 1088016 7121540 14% /usr
What is the recommended procedure to clone i.e. /dev/mdx (/usr) partition to a greater one, say /dev/mdy, to accommodate for growth, whilst preserving attributes including timestamps (and yes, that means also including ctime).All of # cp -ax SOURCE DEST, # rsync -ax SOURCE DEST and # cpio modify ctime.Some sites recommend dd, i.e.:
Code: Select all# dd if=/dev/mdx of=/dev/mdy bs=512 conv=noerror,notrunc,sync
URL....However, I am not sure what will dd copy do with end of partition, and will it see the remaining space on /srv (it's contents are dummy and will be overwritten).
is there a way to clone an installation? I have a couple "master systems" which I want to replicate into other servers. In Solaris I can build a flar image from the first one and install from that image, I looked into cobbler and koan, but they seem to be more repo and kickstart oriented.I need a way to say "take this system as a base and build an installation image out of it".
View 3 Replies View RelatedI have used GParted several times but I only know how to clone a single partition. I am looking for a way to clone and entire drive that has several partitions, along withthe MRB, unpartitioned space and everything else in one step. I have a 500 GB drive that is going out and I want to clone it to a 1 TB drive so I don't have to reinstall 3 different OSs and fix the GRUB. One of the other OSs is on anther drive so I'm not sure that it would work even if I can clone everything exactly. I'm not sure if the drive that is failing is the one with the MBR on it or not. how to do this in GParted or know another good program I can run from a live CD to do this?
View 2 Replies View RelatedI have fedora 10 and it has been working fine for over 6 months. Today I did the system update. After the update, I rebooted the system. Now, it hangs displaying the message "Not cloning cgroup for unused subsystem ns".
View 9 Replies View RelatedSo I'm a newb to ubuntu and I have two desktops I just had wiped clean, there is nothing on the drives. I DL the latest version, burned to CD and tried to get the machines to boot the CD so I can install the software.
I get nothing but reboot retry press F1.
I just inherited a lab full of computers currently running XP and 9.10. They all worked when I last saw them. Recently, tech support re-imaged the XP partition and now I can't boot into Ubuntu. Obviously it overwrote the bootloader that was there, but I can't get it back. The general setup is XP on /dev/sda1 and Ubuntu on /dev/sdb1 with swap on /dev/sdb5.
I've followed a bunch of instructions about reinstalling grub by chrooting into /dev/sdb1 (right? that's the one I should use), grub-install and update-grub all run without a hitch detect both Ubuntu kernels, memtest and the XP install as they were before the reimage. Exit and reboot, it still boots straight to Windows. If I move the boot flag from sda1 to sdb1, the computer hisses at me about not finding anything to boot.
I've gone nuclear on one computer and installed 10.04 on sdb1, but it still boots to Windows. I feel like I need to do something to the MBR on the Windows drive but last time I did anything there I had to fix it with ms-sys. I left out anything wicked important, I'll get what info you need. Oh and if upgrading to 10.04 in a trick fashion will help me, by all means suggest it, because once they get going I'm upgrading anyway.
I do some volunteer work repairing and re-purposing older computers for the Salvation Army Thrift store where I live. Of course most of the computers we get are older. My reason is to get some of the poorer kids a fighting chance at school. We sell these things for next to nothing to accomplish this. I include free tech/training support for 30 days to get them started as. My problem is that finding a version of ubuntu and openoffice that will run on them is becoming difficult. Any suggestions as to a version that works for those not real familiar with computers?
View 7 Replies View Relatedif I need to install Linux o/s in 50 or 100 machines, how do I do it ? (lets imagine that all the machines are identical)
Is it possible to install in one of the machines and just clone in all of the other machines (without actual installation). If so , how do i do it ??
I have VMware player on my laptop. I have three working virtual machines, Android, Windows Vista, and Kubuntu, and three that something went wrong don't work. How do I get rid of these space cloggers? Just go to Home folder/VMware and jus delete the folders of useless machines? Or is there a way to do it properly? Or am I stuck with these forever? And how do I rename a virtual machine?
View 1 Replies View RelatedI have tried to boot from Fedora 10 CD on Compaq Evo D510 desktop as well as HP Pavilion DV6700 Laptop several times. Goes through everything for a long time. Ends up in a screen with colored stripes on the desktop and a blank dark screen on the laptop. I do see the wireless light on the laptop turn blue from orange indicating it is enabled. But was of no use. Both machines crash at the end. I tried both GNOME and KDE.....both crashI am suspecting the display drivers. The desktop has a Intel Chipset and the laptop Nvidia GForce 8600 I guess....These are not old comps. The desktop is just a couple of years old and the laptop is brand new. This is without actually installing Fedora
View 5 Replies View RelatedI have now got three machines with Debian on in my home. I use Mobile Broadband with a very modest monthly limit and remember somehow using Synaptic to gather either Updates or packages to download on one machine where there was another type of internet and could then move the packages back to my computer. Can anyone here remind me of what I would have done there or suggest a means of getting these three updated without blowing my limit. I'd either use a relative's broadband and my netbook, or do the Updates once at home and move the packages to the other two machines.
I'm using Debian 6.01, Gnome edition, 64 bit, on an Atom N450 netbook, a 3ghz dual core AMD pc and a a 2 ghz single core AMD pc, whatever of this is relevant. They have slightly different programs installed but are at the same stage of not being updated yet, with 252mb of them to add.
I'm planing to get 4 dedicated, remote servers for my start up, the question I have is: how to do only one installation and then duplicate or clone this installation into all the other machines. I could install those 4 servers manually, but the problem is - we have a lot of things that our application needs, and later there will be more servers. So an automatic way to do that would be better. We are using Debian. Perhaps there's a way to create a "big package" that will contain all of the necessary software in it, then simply require from the hosting provider that all of our servers come with Debian installed, and then manually upload the "big package" and install it?
View 3 Replies View RelatedI have three Ubuntu desktops that I would like to upgrade from 9.10 to 10.04. Is there a way to avoid having each PC download the same packages? Is there some magic I can do with two of the PCs to maybe point the software source list at the third 'master' PC that does all the downloading?
View 2 Replies View RelatedI've been having some problems trying to get a new netbook working with China Telecom's 3G service (works wonderfully in Windows, but still trying to figure Ubuntu out), so until I figure out the problem with this Huawei modem, I've written a quick python script to handle updates/installations on the Ubuntu side. (Synaptic does fine on generating download scripts for packages, but it needs an option to handle updates as well)
If anyone else has a use for this, you're welcome to use it. Please let me know what needs to be changed to make it work on your box.
I have a home network with 6+ x86_64 machines, all with similar setups. In the past (FC10 and before), I've had common package repositories (e.g /var/cache/yum/fedora/packages) shared via NFS with all the machines (and with keepcache=1 in /etc/yum.conf). That way, a given RPM only got downloaded once; the other machines would then pull it from my local package repository. And I don't mind the disk usage of keeping one copy of all my old RPMS around.
It seems that while DRPMS is great for a single machine, it doesn't make sense in my case. If I have to download the DRPM 6 times (and take the time/CPU hit to recreate the RPM 6 times), I might as well have downloaded the RPM once and been done with it. Is there a not-too-convoluted method to keep a common package repository across multiple machines even with DRPMS? Or, better, to have that first downloading machine pull a DRPM, generate the RPM, then save the RPM in the local shared repository?
I am trying to get preseed working on a bunch of machines with multiple NICs but it doesn't pick the right interface and/or gets "no link" on all interfaces. My PXE kernel line looks like so (I have auto=true priority=critical and interface=auto)
label squeeze
kernel debian-installer/squeeze/i386/linux
append vga=788 initrd=debian-installer/squeeze/i386/initrd.gz auto=true priority=critical ramdisk_size=10800 root=/dev/rd/0 rw url=example.com/d-i/squeeze/preseed.cfg interface=auto netcfg/dhcp_timeout=60
[Code]...
we are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
I wrote a GRUB multi-boot configuration so I can boot multiple distributions and have storage space on one 32GB flash drive.
set imgdevpath="/dev/disk/by-label/multiboot"
Code: Select allmenuentry 'Debian Jessie amd64' {
set isofile='/iso/debian-8.0.0-amd64-DVD-1.iso'
loopback loop $isofile
linux (loop)/install.amd/vmlinuz
initrd (loop)/install.amd/initrd.gz
}
This works in virt-manager when I boot the physical usb device a virtual disk with a usb bus and it works flawlessly, but when I plug it into a physical machine the cdrom detects fails to mount /dev/sdb1 as fstype=iso9660.
I wish to setup a network that works like windows but for with lunix of course!. It will need to be able to handle security/DNS/DHCP & Document store from one location. I've been doing some reading and have found that I think I need to be using one of the following:
LDAP
NIS
Kerberos
I have looked at a few Linux based OS's. I did notice that when you install fedora live desktop it gives you the option to connect to one of the above. So I am looking for a complete solution.
1. How to setup fedora to act as server for my needs (or other Linux build)
2. Add fedora/linux mint machines to server to use new security settings. (or other linux build)
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
I was wondering how can I clone old hdd to new hdd directly. Is this right procedure?
sda is new hdd
sdb is old hdd
Code:
sudo sfdisk /dev/sda < sudo sfdisk -d /dev/sdb
cloning ntfs partitions.(X are ntfs partitions)
Code:
sudo ntfsclone --overwrite /dev/sdaX /dev/sdbX
cloning other partitions.
Code:
sudo dd if=/dev/sdbX of=/dev/sdaX bs=8MB
I had to change my disc for a bigger one, and i want to transfer all my dataconfigurations, etc to a partition in another disk, a simple ctrl C, ctrl V will do or theres a specific tool that i need? I dont want to download all the updates, programs and go through the hassle of reconfiguring everyhtingmy new disk have windows 7 and i installed a fresh ubuntu on it but i want it to be a clone of my old onePS: i just notice now that grub no longer recognize both win7, the old and the new. What's wrong?
View 3 Replies View RelatedI am trying to clone my internal drive on my laptop using the dd command after starting up my computer using the 10.10 installer CD. Nothing happens when I follow the instructions from this site: [URL] When I follow these instructions, it doesn't work. I know that I am not being specific here but all I can say is that nothing happens. What am I doing wrong. My internal drive is 250GB and the partition I created on my DOS formatted external drive is 250GB as well.
View 9 Replies View Related