i have installed wubi on my computer and now i have made a copy of the Ubuntu file so i can try Natty without wrecking my install. i used EasyBCD to make another bootloader entry for it and bcdedit command line and it works fine. but it is selecting the original /ubuntu/disks/root.disk not the new /ubuntu2/disk/root.disk.
View 9 Repliesi 've downloaded and installed ubuntu 11.04 alongside win 7 via wubi, reboot my pc as the installer ask, but the boot menu does not appear on start, and windows 7 is loaded as usual. What can i do?
View 1 Replies View RelatedWhat are the pros and cons of using wubi instead of dual booting?
View 8 Replies View RelatedI had Ubuntu installed in Windows XP (with Wubi). One day my motherboard, let's just say stopped working. So, I had to replace my motherboard..., well I bought a new PC, but with the Hard Drive of the old one. When I first started it i got the same boot screen letting me choose between Ubuntu and Windows XP. Well, you can pretty much figure out that none of them worked. So, I installed Windows 7 (as the new configuration is pretty powerful). So, from the boot menu Windows XP was replaced by Windows 7 but still Ubuntu stays there and I can't figure out how to delete it.
View 2 Replies View Relateddell support thread was a damn joke, i m trying to put ubuntu on a new dell inspiron m5010 using wubi. everything was going great untill after the install on reboot the login screen takes 5 min to fully load. after i log in, it takes another like 5-10 min to fully load. i already tried pci=noacpi that did nothing. i tried loading in ubuntu classic (with no effects) that helped some, but still slow. any thoughts?
dell inspiron m5010 (64bit sys)
amd phenom(tm)IIn850 tripple-core 2.20ghz
ati mobility radeon hd 4250
I put Ubuntu 11.04 Natty Desktop Beta 1 on a flash drive using 7-zip and am trying to install it on a (this is all I know about it) an HP G71 laptop, but when I hit Esc (as instructed) to interrupt the boot process, when I hit USB DEVICE, It starts up with Windows.Is there a way to do a basic install with wubi without booting up from the drive?!?!?!?!
View 8 Replies View RelatedAfter clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View RelatedWhy would some people choose wubi over dual-booting?
View 1 Replies View RelatedIf I boot Ubuntu 10.04 LTS from CD, it prompts me that I need to install drivers for my NIC wireless card and links me to a generic Broadcom driver. After installation of this driver I can see my wireless network. If I then reboot and boot into a Wubi installation I created, my wireless adapter light stays off and I get a message that Wireless networks are disconnected. Do I need to do something to get the same drivers installed under Wubi, or is this a separate issue?
View 1 Replies View RelatedMy laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP
last sysfs file:
CPU 0
odules linked in:
Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N
RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
I wanted to install ubuntu via wubi, but i had to format my partitions (can't do it on wubi ) so i used a crappy program(i don't remember the name) to get rid of Backtrack4 , because i wanted windows kept for my mom.So, that was the sorry, i've ended up with a GRUB error 22, and a Backtrack4 CD stuck in my DVD-rom.So my question is: Can somewone tell me how to fix error 22? (i've seen some methods online, but i obviously can't put a Windows CD in my DVD rom because the Backtrack4 DVD is stuck in there.
View 4 Replies View RelatedI have Ububtu installed (9.10) which uses Grub2. How can I double boot Fedora 12 with Ubuntu 9.10?
View 12 Replies View RelatedUpdated to 10.04 OK except for a couple of things. No sound icon on the task bar and it's not in the 'add to taskbar list'. Not a major problem, just put it in the 'start programs section'.Annoying thing is after selecting from the grub boot menu, the machine seems to be suffering some indesision as the cursor sits on the top lhs of the screen flashing and the screen modulates between various degrees of darkness. Then the machine boots OK. Certainly slower than karmic - not quicker as reported. Seems to be some conflict happening. There is a duplication of the kernal entries for default and safe. Mabe this is the problem. I have run update-grub2, but it keeps giving me double entries.
View 5 Replies View RelatedSo yeah I want to transfer my system to the real Ubuntu. Problem is I can't boot into my Wubi Ubuntu cause I lost boot.
View 5 Replies View Relatedi decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I have somewhat managed to fix the laptop, x100e, by not being on battery and installing the ATI driver. But then the wireless doesn't work, nor do the drivers I had working with 9.10 (RT8192SE). So, that's scrapped. A laptop without wireless is pretty useless.Workstation does a complete lockup on login aswell. HasNvidia 9300 onboard card. But at this point, I don't want to find out what else is waiting when I fix that.I was really expect a rock solid release since it was going to be LTS. But at the moment it's pretty useless to download and I have been using Ubuntu since 7.xx series.
View 2 Replies View RelatedI recently installed ubuntu 9.10. I have been trying to launch utilities and other programs that have .exe extensions by double clicking the .exe file. Each time I attempt this I get the following error message in archive manager:
[Code]...
I have two hard drives in my laptop, they are NOT raid configured. I installed 32-bit Ubuntu on the second HD, third partition: Sdb3. I then installed 64-bit Windows 7 on the same hard drive, first partition: Sdb1 (Sdb2 is formatted NTFSd willusedasstorage).Windows installed fine.Then I installed Windows in 32-bit on the first hard drive, first partion: Sda1. Sda2 will again be used as storage.When I boot up, Windows boot manager gives me the option of the two windows OS's to install (but not Ubuntu of course).I wanted to boot into the Live CD, where I would reinstall grub, assuming it would recognize my two Windows, and I could boot into any of the three OS's upon start-up.The Ubuntu Live CD, will act as though it is going to boot, bringing me up to the loading screen, then it cuts out to "busy box" and I am not sure what to do. Buys box is almost like a command prompt, but I don't understand the commands.
View 1 Replies View Relatedi just tried to install Ubuntu 11.04 (x86) on my Dell Inspiron 1520 Laptop (with a Nvidia 8600M GT graphics card) with Wubi. A normal installation try resulted in an unreadable screen after boot (see attachment). I then managed to get the installation going by modifiing the boot options like shown in this HowTo: [URL] After the installation Wubi automatically rebooted the system without any prompt, so that i couldn't install the proper Nvidia drivers (is there a way to prevent wubi from doing that?) like described in the HowTo. After the reboot the graphics were messed up again.
Boot parameters like "text" "single" or vga=xxx didn't work, adding nomodest and nouveau.modset again didn't help either (I think "text" acutally brings up the console, but i just see an unreadable "blacker" screen than normal). Is there an boot option for grub to disable all nvidia related drivers and the graphical login manager and just show a text based console? Or force the gfx driver to be the same as in the installation process (which was perfect...native resolution, no graphical errors until the reboot) (i tried xforcevesa without any luck; nosplash and removing quiet/splash does work - the bootup process is readable, but as soon as the login manager starts its messed up again)
I installed Ubuntu using wubi, But I didnt assign much space, probably like 17 gigs or something. My geting a pop up everytime my ubuntu starts up saying i got low disk space, very low disk space, Im runing ubuntu 10.10. How do I add more disk space? How do i make the partition bigger.
View 6 Replies View RelatedWubi 10.04 could not retrieve the required installation files
View 4 Replies View RelatedIs it possible to increase the disk space for a Wubi installation?
View 3 Replies View Relatedis it possible to recreate the whole wubi installation?Thats the situation: I only have 1 partition on my HD so i installed ubuntu via wubi and it worked perfectly fine. Recently though, i had to format my Windows but i backed up the whole installation folder of wubi/ubuntu.Now i want to get my wubi installation back. I know i can access the *.disk files with several tools, but im not opting for recovering some folders. I want the complete installation running again. So is there an easy way to recreate it?
View 9 Replies View RelatedHow will be complete windows login after installation wubi? How to make choice between load windows and linux?
View 3 Replies View RelatedIn bash I need to use some equivalent of double quotes inside double quotes (or the other way around.)I need to run the following statement to get the output of foo and store it in a variable while passing foo the $file which probably contains spaces.
Code:
variable=$(foo "$file")
The problem is that foo might return an empty string and if it does I need to catch it
[code]...
I installed lucid using wubi to dual boot with vista - I'm just wondering if there's any advantage to be gained into going back into vista, un installing lucid, making the necessary partitions and reinstalling lucid 'properly'.I use both OSs on a laptop so the power issue regarding fs vulnerability isn't that much of a concern.
View 9 Replies View RelatedI'm very new to Linux and Ubuntu (about 2 days) and am having a hard time getting Ubuntu to work. I'm not completely sure that I'm posting in the right forum since I have several issues. I can't tell what's causing what.
I'm using the wubi installer for version 10.10 (i386 - 32 bit). I have an AMD 64-bit, but the wubi installer for that only crashes when I try to boot it the very first time. I get a blank screen and my tower is silent. Version 10.04 does the same. Version 10.10 is the only one that gets me somewhere.
So, I installed ndiswrapper and the proper driver for my USB adapter. Now I have 2 main problems:
1). the most relevant to this board is that when I use the update manager to get all 135 updates, I'm prompted to reboot to complete the installation. When I do that, i get the same blank screen and silent tower treatment. Oddly enough however, when I went back to windows, uninstalled ubuntu, then reinstalled it again using wubi, the update manager said that I already updated an hour ago (!?!?.. I assume it's still reading the old files from the previous install attempt). Unfortunately I messed it up anyway trying to fix my second problem...
2). my internet connection fails here and there. I don't know if it's ndiswrapper or the driver or what. Once it fails, it won't reconnect. I have to go into ndiswrapper, delete the current driver and reinstall it. This has happened to me while on the internet (scouring these forums) and while downloading the updates and whenever it feels like it.
Also, the system does freeze up on me here and there as well. Sometimes when I'm using ndiswrapper. Sometimes when I'm authenticating myself. Sometimes in update manager and sometimes in synaptic. Right now it's working. But I haven't updated yet and I'm afraid to try.
I want to put ubuntu on it for daily use and keep windows for games. Have done the wubi process but desktop ubuntu takes forever to boot. Ubuntu Netbook Remix seems like the best idea but I want to do it via wubi so as not to loose windows.
View 2 Replies View RelatedI am trying to install 10.04 with wubi and I encounter a strange error:
At first, everything runs normally. Then I am asked to reboot the system.
After rebooting, Ubuntu starts with a GUI (desktop background, my USB-Mouse is working) and a Window appears ("completing installation" and some advertisement).
A dialog tells me, that the systems tries to set the time (probably from an NTP Server). This is shown with a completion bar, starting at 571% and going up to 800% in several steps. Then it says: "Installation des Grundsystems".
Next steps: creating ext4 file system, copying files ... Again, a progression bar appears, going up to 28%.
Then, an error message appears: "Datei entspricht nicht ihrer Quelle auf der CD/DVD" (file does not match the source on CD/DVD).
It gives me a filename(e.g. /target/usr/lib/smbcquotas) and the choice to Abort/Retry/Skip. I click on "Retry" ("Skip" has exactly the same effekt).
The progress bar goes up to 38%, and I can hear that files are copied. Then the system hangs, showing the desktop wallpaper, mouse functioning. I can only turn it off.
I can try this procedure several times. I even used different disks (one brand new). It always comes to the same end. The only thing that changes are the file names ut gives me. I think that the error message is misleading. Probably there is another error behind the scenes.
I had ubuntu running in wubi just fine for several weeks. I had to do some system reconfiguration which forced me to re-initialize the whole drive that wubi was installed in. I saved the whole ubuntu directory thinking I could just re-install wubi, rename the new ubuntu directory, copy in the old ubuntu directory in it's place and life would be good. Not so.
I found an article which seemed to cover this sort of scenario so I tried the following:
- Installed wubi
- Made sure it booted
- Didn't complete the installation--rebooted to windows
- Replaced just the root.disk file from the old installation, overwriting the newly created root.disk file.
- Booted wubi
- I get the grub menu, then after that I get the following error message: