Ubuntu Installation :: Connecting The Second Sata Drive - No Boot
Oct 7, 2010
I've been trying to find a solution, I've looked everywhere but no luck. I have a 1TB drive, checked the cable & it's connected to motherboard SATA0. That motherboard is dual booting fine (windows7 + Ubuntu 10.04).
My problem is when I connect the other SATA drive, SATA1. Upon restarting my machine, nothing happens & I dont see any boot menu (grub).
I've checked the bios settings, boot drives are in order:
CD-ROM
SATA0
SATA1
To check if the second drive has physical errors, I've connected it as SATA0 (alone) & installed successfully windows & ubuntu 10.04. I formatted it & installed ubuntu studio. The drive is working fine. So I formatted it again, & now it's not connected.
How can I make it work? I want SATA0 to have both windws/ubuntu, & the SATA1 to be just a data storage drive.
View 6 Replies
ADVERTISEMENT
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Feb 28, 2011
I have a HP PC that I have installed a PCI SATA controller in. The PC doesn't support booting from the card.... So here is what I would like to do. (btw..I'm a seasoned noob on Linux.) I would like to be able to boot ubuntu 10.10 from a usb pin drive 2Gb to a point where the kernal can recognize the SATA drive then start the OS from the SATA HDD.
I can see and access the drive if I boot to a live CD but when I install it won't boot because the PC's bios does not see the PCI card. This has to be possible but my Google foo isn't strong enough to find out how. Would a simple GRUB install on the pen drive work?
View 5 Replies
View Related
Dec 27, 2010
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies
View Related
Jul 28, 2009
I have a seagate SATA hard drive that was running a mythtv distro. It had 3 partitions, EXT3, swap, and XFS. I started having I/O errors on boot and saw error messages on both the EXT3 and the XFS partitions. I also heard some clunking sounds on the drive when it was reading, so I thought hell, the drive is dead.
I have since replaced the drive and everything is back up and running on the replacement drive. I thought hell, the seagate drive is toast, but I just want to verify it with some sort of tool. I have the hard drive in a Vantec NexStar external hard drive case (SATA->USB) and found there was a tool called badblocks. Ran badblocks on it, which ran for 24ish hours and found no bad blocks. I also didn't notice any clunking sounds while it was running.
I ran
Code:
badblocks -n -v /dev/sdb
Is badblocks a proper test to run on external hard drives or was I just wasting my time? Is there any way that I can really test it without removing it and connecting it with SATA to the motherboard?
View 7 Replies
View Related
Feb 23, 2011
Having an issue I've been unable to resolve for for a week now. I've 2 drives, SATA1 for OS and operating files, SATA2 for media storage. came home last week to an update manager window present and error in Transmission stating unable to second drive due to "Read Only" status. the drive was never set to read only status but following the update manager a reboot was needed. once rebooted, the GRUB menu came up (dual boot system), selected Ubuntu then booting stopped. blank black screen with blinking cursor. rebooted several times, checked bios recognition of both drives, replaced cables, switched power to drive to separate cables, used different SATA ports but nothing worked. finally removed the second media storage drive and Ubuntu booted normally. now any time i connect the second drive and reboot it fails to boot into ubuntu or XP. i removed the media drive and installed it in another computer and it worked normally. have searched everything i can but no answers have been found so far. wondering if anyone here has had similar trouble or has idea for what to try.
I'm using Ubuntu 10.04 64 bit with current 3.6.32-28 kernel
View 4 Replies
View Related
Apr 13, 2011
I have just installed opensuse 11.4 and the install fails to boot, grub hangs or gives an error.
I have tried installing grub in MBR and root changed every setting I can find and even downloaded a fresh ISO. As a last resort I changed the machines BOIS settings from SATA to emulate ide, booted as expected but a bit slow.
11.2 and 11.3 worked on this machine with no problems. Am i missing something? I also tried an Ubuntu install and this worked fine!
View 9 Replies
View Related
Oct 1, 2010
I recently installed a PCI Sata card along with a SATA HDD and a SATA DVD burner. My PC ogirinally used /dev/sda1 to boot into root. But now when I plug the new HDD in, it names the SATA drive /dev/sda and the SCSI drive /dev/sdb.
I have unplugged the SATA drive and am able to boot into linux. I can also use the DVD burner. In the lilo.conf file, I have rename the root to /dev/sdb1 so when I plug the SATA drive in and reboot, it should go to sdb1 for root. But here is the error that Im getting.
VFS: Cannot open root device "801" or unknown-block(8,1)
Please append a correct "root=" boot option; here are the available paritions
0800 488386584 sda driver: sd
0b00 1048575 sr0 driver: sr
[Code]....
View 6 Replies
View Related
Dec 17, 2009
I had put a second Sata hard drive in my computer and was pleasantly surprised not to run into any problems. No BIOS changes, just start the partitioner, partition, mount, it worked.And then... my computer didn't boot today.I disconnected the new hard drive and it went a little bit further, allowing me to log in as root and remove some lines in /etc/fstab. After that, it booted without any issues.I then remembered that the new drive was /dev/sda and the old drive /dev/sdb. I assume this is the reason for not booting, there is no GRUB on /dev/sda. How do I fix this? Can I simply plug in the cable for the new drive where the cable for the old drive was?
View 4 Replies
View Related
Sep 28, 2009
Yesterday I was on my Windows computer doing homework. Once Football came on, I hit the Standby button on my keyboard and walked out of my room. Came back at halftime to discover that my system never went into Standby. I turned on my monitor and saw a bunch of code repeating. I don't remember it all, but it was something to this effect
Super Block not compatible with current BIOS
scanning for *insert system file here*.... not found
scanning for floppy drive... not found
scanning for cdrom1... not found
So I hit the restart button on my tower. When it restarted, I was brought back to the same screen. So I unplugged the power cord from my computer and counted to 10. I plugged it back in and this time I got my mobo logo screen and the system appeared to start up fine, until I got to the SATA drive scanning screen. When my computer would scan for my SATA hard drive, it would idle for several minutes, during which a series of periods (".") would show up until eventually I get a message that says: WARNING! - Something wrong with your hardware!
I have troubleshooted a number of things so far:
1) I took my SATA Hard Drive out of my computer and plugged it into my Linux computer and the system booted fine! I used the same SATA cord, so I know both the drive and the cord ARE WORKING!
2) I tested the power cord from the power supply that runs to my HD and it is working just fine.
3) I plugged the HD back into my Windows computer (the original one it was in when I started having this problem) and I ran GParted. When the GUI came on, I could not see any drives and there was a message at the bottom of the window saying that no devices could be found. This was no surprise to me because I watched the verbose mode as GParted booted and it gave error messages when it tried scanning for my hard drive.
4) I have also tried plugging it into the other SATA ports on my motherboard.
5) I tried flashing the mobo BIOS. The flash worked just fine (or at least it appeared so), but the HD is still not being found on the system boot scan.
Bottom line, I know the hard drive is fine because it worked in my Linux computer. So I am thinking it has to be the motherboard. But before I go out and buy a new Mobo and CPU (and possibly new RAM), I wanted to quickly jump on here.
View 1 Replies
View Related
Aug 1, 2010
I have tried to install ubuntu onto my computer using the live CD. It installed fine, and it put grub on sda (which linux sees as my SATA drive). Windows is installed on the ide drive which linux see's as the sdb drive. It was a successful install and in theory it should work, except it find the windows install first so it boots into windows without using grub. I think that linux assigns the drives using the sata first and the ide second, but windows does the opposite and the ide drive is first and the sata is second.
Is it possible to install grub onto the ide drive and get it to dual boot linux or is it possible to use the windows bootloader to recognize the linux install and chainload grub? I am thinking that if I use grub on the ide drive it will throw an error like what happened during my wubi install and it is unable to find the kernel because it is looking for it on sda, but from a windows install it is sdb. I have tried to get the computer to boot from the sata drive, but the mobo is a bit old and I do not think it is supported.
View 2 Replies
View Related
Oct 5, 2010
Install of 10.4 64 bit not showing choice of sata drives on install. W 7 on sata a drive, SUSE 11 on sata b drive. Need to load Ubuntu 10.4 on drive b, but not given choice of drives on the install. Only "clear drive" listed on the install window.
This is not the case on 32 bit, a graph with drives listed. W7 a runs Adobe CS5, the Ubuntu 10.4 has excellent font, type display on the live cd.
View 1 Replies
View Related
Feb 17, 2010
i have a strange problem while trying to install Ubuntu 9.10 64bit (also tried with x86 - no luck).My system specs : Motherboard : ASUS P5B VM SE (PATA : JMB368 / Intel ICHHD : Seagate SATA II 3GBit 320 MB (connected in SATA port 1)CPU : Intel Core 2 Quad 2500 GHzI must state i installed Windows 7 without a problem. After that, i tried to install Ubuntu 9.10, first 64bit then x86 but in every case the setup starts, i select language / location etc and when the partitioner starts i see no hard disk drive. Same happens if i try the alternate install cd.
I must mention here that if i click on "Exit" and access Ubuntu Live CD desktopm i can go System >Administrator > Disk Utillity and GParted. In both utillities my HD shows up just fine. So what could be the problem ??? I tried starting ubuntu with pci=nommconf irqpoll -> no luckHere is the lspci output :
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
[code]....
View 9 Replies
View Related
Apr 5, 2010
I have a Desktop system using the Intel DG45ID motherboard with integrated graphics. I can't install from the 9.10 LiveCD. It can't find the Hard drive which is on the chipset's SATA controller.However, I can install 9.04 just fine. I can even do the 9.10 upgrade without a problem.Does anyone know if this bug has been reported. I'm hoping 10.4 has this fixed. I'll test the beta to see
View 9 Replies
View Related
Aug 19, 2010
I am about to do a clean install of 10.04 (64-bit) on a ThinkPad X201. The machine will only be running Ubuntu (i.e., no dual-boot). Is there any reason to use compatibility mode for the SATA boot drive, or will AHCI work fine?
View 2 Replies
View Related
Sep 15, 2010
I have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
View 7 Replies
View Related
Mar 12, 2011
I want to install Ubuntu 10.10 via a DVD-ROM but I faild. I got the message "no common cd-rom drive was detected." I have tried to install ubuntu 11.4 and failed too.
Hardware Setting:
DVD-ROM was attached to SATA 3.0 port.
SATA controller was set to IDE mode.
PCH is CougarPoint.
I use the same hardware setting to install Red Hat 6.0 and it works fine. I tried following boot option but in vain: noapic, acpi=off, nodmraid, all_generic_ide. It is ok to boot via a live usb but ubuntu 10.10 still can't find DVD-ROM. I have to use the hardware setting I descripted to install Ubuntu 10.10.
dmesg:
Code:
[ 1.892198] ata1: SATA max UDMA/133 cmd 0x3098 ctl 0x30ac bmdma 0x3070 irq 19
[ 3.309652] ata1.01: failed to resume link (SControl 0)
[ 3.469636] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[code]...
View 5 Replies
View Related
Apr 18, 2009
I have just changed my OS from Vista to Linux Fedora 10. After looking at my system I notice my SATA drive was not recognised its my 2nd drive. Is this a normal think or can it be fixed.
View 1 Replies
View Related
Mar 21, 2010
Somehow Fedora 12 does not find one of my Sata drives (Seagate Barracuda 500GB) on the motherboard (Asus P5Q pro). The drive is attached to SATA_E1, which is a Silicon Image Serial ATA RAID connector. The drive currently has Windows Vista 64-bit OS which has been working fine. Fedora install loads correctly without errors, but only shows my RAID system on SATA ports 1-6.
WHAT I HAVE TRIED:
I have tried showing RAID as IDE in the BIOS, and setting it to compatible mode. Still does not detect.
I have tried setting the drives to ACPI mode in BIOS. No effect.
OTHER INFO:
I'm installing the x86_64 version of Fedora 12. I have run the Debian i686 installer and it picks up this volume without issue.
View 6 Replies
View Related
Feb 21, 2010
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
[Code]...
View 9 Replies
View Related
Apr 16, 2010
I decided to install the Ubuntu Netbook remix (9.10, I believe) on this extra IDE hard drive I had (my other three hard drives are SATA.) My primary hard drive contains a Windows XP, my second contains Windows 7, and my third SATA drive is just NTFS-formatted storage. I went through the installer and choose to format and install on my 40GB IDE hard drive, which it did. Then it finished and rebooted. It apparently decided to install the GRUB bootloader onto the primary hard drive (not the one it was installed on,) which was not my intention. The bootloader froze the boot of my computer and wouldn't work. (Stuck at loading GRUB.) I couldn't even get to the BIOS. So I pulled the plug on the primary hard drive and tried to boot again. I could get into Windows 7 just fine, but that was it. The problem, though, is that the CD drive (also SATA) no longer shows up in My Computer. Also, after changing the boot order and replugging in the former primary hard drive, it wouldn't show up, either. Nor would the IDE one (though I'm pretty sure that's because Windows doesn't understand the EXT (or whatever Ubuntu uses) file system.
Does anyone know why this occurred and how to get those drives to show up in Windows again? I don't really care to get the netbook remix working here, since this isn't even a laptop, it was just an experiment. Also, I'd love to know how to remove GRUB from my primary hard disk so that I can boot from it again.
View 3 Replies
View Related
Mar 2, 2010
I can dual-boot on my PC by using my SATA drive for Windows & a second IDE (PATA) one for Ubuntu.However when I try to install both OS's on the Primary SATA drive side by side only one is detected (and I have no option to boot the other).
I have a friend with the same problem who is trying to boot Win7 and Ubuntu off the same SATA drive and the same issue occurs on his (He doesn't have the second drive as an option as I do).
Does anyone know a way to get side by side installation to work on one (SATA) drive? Failing this is it possible to boot Ubuntu off and External hard drive and still be able to dual boot Windows & Ubuntu?
View 9 Replies
View Related
May 30, 2010
I have GRLDR configured in C:oot.ini in Windows XP in the first SATA drive. Now I also have Ubuntu in the second SATA.
I have two options.
1. Switch the SATA drives so that the Ubuntu SATA is the primary boot drive. Use grub to boot Windows XP from there.
2. Boot Win XP which shows the GRUB menu of GRLDR. Choose the ubuntu boot menu so that it can detect the second SATA and boot Ubuntu.
How can I set up the second option ? I know that everyone might recommend option 1 but I want to learn if it is possible or not.
View 4 Replies
View Related
Aug 20, 2011
I have a Asus P5Q-E with SATA Raid (fake Raid ?) with 2 250Gb disks on Raid 0 and have Windows 7 installed. Freed some space and want to install Ubuntu 11.04 alongside Win7. Install choosing the "alongside" option. Installed...reboot...grub rescue (error no such device). Win7 disk recovery and got access to Win7 again. Where is Ubuntu ? Nowhere... the free space continues free (not partitioned) and found no evidence of ubuntu install. Ok...second try with "something else" option, created /boot /swap and / partitions and installed grub on /boot partition (this time I want to use windows boot to choose...and if it fails the instalation again, at least I got Windows). Installed...reboot...grub rescue.
Again, the free space wasn't partitioned and the installer spend some time doing something but there is no evidence of ubuntu install. Also grub seems to be installed on first disk (even when I choose /boot as device bootloader installation) - I've used EasyBCD to create an entry on win bootloader and when I choose that got grub> (not grub rescue>).
Can Ubuntu be installed on such conditions ?
View 1 Replies
View Related
May 3, 2010
I seem to be unable to boot up my computer. After upgrading from 9.10 to 10.04, I get the following messages during boot up:
Code:
(lots of text is going by)...
write protect is off
write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Code]....
if you need me to post a log file, just let me know and I'd be more than happy to post it.
View 6 Replies
View Related
Mar 8, 2011
1. I install Desktop 10.4 or server 10.10 on my 250GB IDE drive using guided partition structure.
2. I add SATA Drives (of varying types and sizes to test) to the system and create a raid.
3. When I restart grub won't initialize with the SATA's plugged in.
4. I have tried this in various ways, installing with the SATAs already connected, making the raid in the install process etc.
I have tried re-installing formatting the drives in windows, deleting partitions, making new ones, low level formatting. It appears to be related to an issue with GRUB re-ordering drives so it is trying to boot off the wrong drive - I would edit grub but it doesn't get that far into the boot. Just rudely flashes it''s cursor at me. Is this really so uncommon that there isn't a straight simple answer?
What makes me think it has to do with partitions and formatting is that when I first added new drives they worked on the boot. I even made the raid in Desktop mode in Server - Rebooted- Rude flashing cursor.
View 8 Replies
View Related
Jun 21, 2010
I have a 9.10 fully updated install on an old P4 HP desktop that otherwise runs flawlessly. We moved it to the bedroom to use as a media center and when I plug in a Thermolake toaster with a Hitachi 750G SATA drive it is recoginized and available no problem. I can read/write no problem. It works via nfs4 no problem. The issue is if I reboot while the drive is attached it the machine refuses to reboot and hangs on the initial hardware screen not even showing a grub screen. This has always been a native ubuntu machine with no dual boot or any weird grub2 issues previously. Interestingly, I am getting the exact same issue with another HP desktop (Celeron machine) with 9.10 Server 32bit that I' using as a home server. This is obviously a bigger problem because if the server updates or requires a reboot for any reason I can't just leave the drive attached. This drive houses our movie and music collection.
View 9 Replies
View Related
Apr 14, 2011
I have recently built a new system which has two internal sata drives. The plan was to install windows 7 one drive and ubuntu 10.10 on the second drive for KVM hosts. I started with the windows install which completed, then I went forward and installed ubuntu 10.10 64bit to my second drive (sdb). During the installation I chose to manually partition my drive. i partitoned the drive (sdb) as follows
/boot - 1gb
/ 40gb
swap 16gb
extended partion of 400gb
I then selected sdb to hold the boot record, as it was set by default to sda (my windows drive). The OS installed fine. I then went to reboot my system so go back into windows, by selecting the first drive in the bios. Once selected the system keeps booting into Ubuntu, no matter which drive I select. Now I checked the grub.cfg file and i see all references to hd1 there is no reference for windows found. I then proceeded to do 'sudo update grub2' this did not pickup any reference to my windows droive to add to the grub menu. When i select the ubuntu drive to boot fom my bios, i get no grub menu appaer it just boots quite happily into ubuntu. Can anyone please provide any resoloution to this, I can provide additonal outputs regarding my partion tables etc. later this evening when I get back from work.
View 9 Replies
View Related
Jul 9, 2011
My new PC fails boot when having my IDE DVD drive connected. If the drive is removed the OS boots up without any issue. Once the PC is powered ON, the grub menu shows up, but when Ubuntu 10.10 is selected I get a blank screen with a blinking cursor on the top left corner and I have only option to force shutdown the CPU.ON selecting windows 7 i'm able to boot successfully and use the DVD drive without any problems.
View 1 Replies
View Related
Jun 4, 2010
I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
View 9 Replies
View Related
