Ubuntu Installation :: Won't Boot When Additional Sata Is Connected
Mar 8, 2011
1. I install Desktop 10.4 or server 10.10 on my 250GB IDE drive using guided partition structure.
2. I add SATA Drives (of varying types and sizes to test) to the system and create a raid.
3. When I restart grub won't initialize with the SATA's plugged in.
4. I have tried this in various ways, installing with the SATAs already connected, making the raid in the install process etc.
I have tried re-installing formatting the drives in windows, deleting partitions, making new ones, low level formatting. It appears to be related to an issue with GRUB re-ordering drives so it is trying to boot off the wrong drive - I would edit grub but it doesn't get that far into the boot. Just rudely flashes it''s cursor at me. Is this really so uncommon that there isn't a straight simple answer?
What makes me think it has to do with partitions and formatting is that when I first added new drives they worked on the boot. I even made the raid in Desktop mode in Server - Rebooted- Rude flashing cursor.
View 8 Replies
ADVERTISEMENT
Feb 23, 2011
Having an issue I've been unable to resolve for for a week now. I've 2 drives, SATA1 for OS and operating files, SATA2 for media storage. came home last week to an update manager window present and error in Transmission stating unable to second drive due to "Read Only" status. the drive was never set to read only status but following the update manager a reboot was needed. once rebooted, the GRUB menu came up (dual boot system), selected Ubuntu then booting stopped. blank black screen with blinking cursor. rebooted several times, checked bios recognition of both drives, replaced cables, switched power to drive to separate cables, used different SATA ports but nothing worked. finally removed the second media storage drive and Ubuntu booted normally. now any time i connect the second drive and reboot it fails to boot into ubuntu or XP. i removed the media drive and installed it in another computer and it worked normally. have searched everything i can but no answers have been found so far. wondering if anyone here has had similar trouble or has idea for what to try.
I'm using Ubuntu 10.04 64 bit with current 3.6.32-28 kernel
View 4 Replies
View Related
Dec 10, 2010
There is a FC4 Server with A8V-MX mobo currently running 2x WD500 SATA drives in RAID1 with a third WD500 SATA drive for data backup. This machine has been running 24/7 since January 2007.The plan is to replace the WD500s with WD 2TB SATA II drives in a similar setup as above. i.e. 2 drives in RAID1 and the third drive for data backup.Definitely looking to do a clean Fedora 14 install on the 2TB but have some questions.
1. Will Fedora 14 detect the VT8251 connected SATA drives?
2. If not, how do I get drivers so it will? (I have the mobo CD with makedisk, but prob for windows)
I already have the 14 x86-64 DVD ready to go, but I am not yet at the site.the BIOS settings are: SATA, RAID or AHCI.
View 1 Replies
View Related
Mar 10, 2011
I have a Dell XPS 420 with a 500gb SATA drive on which Windows Vista is installed. I also have an additional hard drive that I wish to install for an Ubuntu installation. Is it possible to create a dual boot system with Windows on the original HD and Ubuntu on the newly installed HD?
Simply put, my computer will have 2 hard drives. The original hard drive has Windows installed. I would like for the second drive to contain the Ubuntu install so that the only thing changed on the original drive is the MBR (I suppose that's how it would work).
View 4 Replies
View Related
May 31, 2011
I upgraded F14 to F15; However, F15 no longer recognizes my 3 sata disks connected through Marvell controller. The controller is an integrated Marvell chipset 88SE6480. The controller has its own manufacturer driver but it was intended for RHEL 5.4 (mv64xx) and installation of this driver fails to generate mv64xx driver.
View 3 Replies
View Related
May 30, 2010
I have GRLDR configured in C:oot.ini in Windows XP in the first SATA drive. Now I also have Ubuntu in the second SATA.
I have two options.
1. Switch the SATA drives so that the Ubuntu SATA is the primary boot drive. Use grub to boot Windows XP from there.
2. Boot Win XP which shows the GRUB menu of GRLDR. Choose the ubuntu boot menu so that it can detect the second SATA and boot Ubuntu.
How can I set up the second option ? I know that everyone might recommend option 1 but I want to learn if it is possible or not.
View 4 Replies
View Related
Feb 28, 2011
I have a HP PC that I have installed a PCI SATA controller in. The PC doesn't support booting from the card.... So here is what I would like to do. (btw..I'm a seasoned noob on Linux.) I would like to be able to boot ubuntu 10.10 from a usb pin drive 2Gb to a point where the kernal can recognize the SATA drive then start the OS from the SATA HDD.
I can see and access the drive if I boot to a live CD but when I install it won't boot because the PC's bios does not see the PCI card. This has to be possible but my Google foo isn't strong enough to find out how. Would a simple GRUB install on the pen drive work?
View 5 Replies
View Related
Aug 20, 2011
I have a Asus P5Q-E with SATA Raid (fake Raid ?) with 2 250Gb disks on Raid 0 and have Windows 7 installed. Freed some space and want to install Ubuntu 11.04 alongside Win7. Install choosing the "alongside" option. Installed...reboot...grub rescue (error no such device). Win7 disk recovery and got access to Win7 again. Where is Ubuntu ? Nowhere... the free space continues free (not partitioned) and found no evidence of ubuntu install. Ok...second try with "something else" option, created /boot /swap and / partitions and installed grub on /boot partition (this time I want to use windows boot to choose...and if it fails the instalation again, at least I got Windows). Installed...reboot...grub rescue.
Again, the free space wasn't partitioned and the installer spend some time doing something but there is no evidence of ubuntu install. Also grub seems to be installed on first disk (even when I choose /boot as device bootloader installation) - I've used EasyBCD to create an entry on win bootloader and when I choose that got grub> (not grub rescue>).
Can Ubuntu be installed on such conditions ?
View 1 Replies
View Related
May 3, 2010
I seem to be unable to boot up my computer. After upgrading from 9.10 to 10.04, I get the following messages during boot up:
Code:
(lots of text is going by)...
write protect is off
write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Code]....
if you need me to post a log file, just let me know and I'd be more than happy to post it.
View 6 Replies
View Related
Oct 7, 2010
I've been trying to find a solution, I've looked everywhere but no luck. I have a 1TB drive, checked the cable & it's connected to motherboard SATA0. That motherboard is dual booting fine (windows7 + Ubuntu 10.04).
My problem is when I connect the other SATA drive, SATA1. Upon restarting my machine, nothing happens & I dont see any boot menu (grub).
I've checked the bios settings, boot drives are in order:
CD-ROM
SATA0
SATA1
To check if the second drive has physical errors, I've connected it as SATA0 (alone) & installed successfully windows & ubuntu 10.04. I formatted it & installed ubuntu studio. The drive is working fine. So I formatted it again, & now it's not connected.
How can I make it work? I want SATA0 to have both windws/ubuntu, & the SATA1 to be just a data storage drive.
View 6 Replies
View Related
Jun 13, 2010
I have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies
View Related
Jun 21, 2010
I have a 9.10 fully updated install on an old P4 HP desktop that otherwise runs flawlessly. We moved it to the bedroom to use as a media center and when I plug in a Thermolake toaster with a Hitachi 750G SATA drive it is recoginized and available no problem. I can read/write no problem. It works via nfs4 no problem. The issue is if I reboot while the drive is attached it the machine refuses to reboot and hangs on the initial hardware screen not even showing a grub screen. This has always been a native ubuntu machine with no dual boot or any weird grub2 issues previously. Interestingly, I am getting the exact same issue with another HP desktop (Celeron machine) with 9.10 Server 32bit that I' using as a home server. This is obviously a bigger problem because if the server updates or requires a reboot for any reason I can't just leave the drive attached. This drive houses our movie and music collection.
View 9 Replies
View Related
Apr 14, 2011
I have recently built a new system which has two internal sata drives. The plan was to install windows 7 one drive and ubuntu 10.10 on the second drive for KVM hosts. I started with the windows install which completed, then I went forward and installed ubuntu 10.10 64bit to my second drive (sdb). During the installation I chose to manually partition my drive. i partitoned the drive (sdb) as follows
/boot - 1gb
/ 40gb
swap 16gb
extended partion of 400gb
I then selected sdb to hold the boot record, as it was set by default to sda (my windows drive). The OS installed fine. I then went to reboot my system so go back into windows, by selecting the first drive in the bios. Once selected the system keeps booting into Ubuntu, no matter which drive I select. Now I checked the grub.cfg file and i see all references to hd1 there is no reference for windows found. I then proceeded to do 'sudo update grub2' this did not pickup any reference to my windows droive to add to the grub menu. When i select the ubuntu drive to boot fom my bios, i get no grub menu appaer it just boots quite happily into ubuntu. Can anyone please provide any resoloution to this, I can provide additonal outputs regarding my partion tables etc. later this evening when I get back from work.
View 9 Replies
View Related
Jun 4, 2010
I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
View 9 Replies
View Related
Feb 28, 2010
I just recently installed ubuntu. I had always used windows before, and I wanted to try something different. My laptop's internal HDD is pretty full so I decided to install ubuntu on my 500gb external HDD. It is connected via USB A to USB B. So I run through the installation no problems at all. I partitioned 200gb of the external HDD for ubuntu. After install I could run ubuntu just fine and I really like it.
However now it boots through GRUB. I am not really sure what GRUB is but it says GRUB loading every time I boot up and then lets me choose what os to boot, but if I do not have my external HDD plugged in then GRUB fails to start and I cannot boot at all from my laptop. Is there a way that I can get it to boot windows from the internal HDD without having the external HDD?
View 9 Replies
View Related
Dec 27, 2010
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies
View Related
Apr 2, 2010
I'm trying to install ubuntu on a wd15ears hdd. Booting from the CD works fine when I don't have any drives connected, or some other drives connected, but if my new wd15ears 1.5TB hdd is connected, after the boot menu the pulsating ubuntu logo will pulsate for a while, and then I'll only see the blinking cursor in the top left corner of my screen. The hdd light is constantly on and nothing happens. Can anyone help me please? Is there a way to put the boot in verbose mode so I can see what fails, instead of seeing the ubuntu logo?
View 1 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
Oct 30, 2010
Have a Dell Studio XPS with 64 bit Meerkat on it. Whenever I connect my Samsung external monitor by displayport/dvi ubuntu no longer boots. Machine unresponsive and have to cut power and disconnect it. :/
Sounds exactly like this bug, no? [URL] Except for the fact I have ATI video card and the restricted drivers (with Catalyst control center, although it is useless).
Code:
02:00.0 VGA compatible controller: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series] Win7 install works fine.
View 2 Replies
View Related
May 1, 2011
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
View 4 Replies
View Related
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Jan 25, 2010
I am new to linux and I am attempting to establish a dual boot with Windows Vista 32 Bit and Linux Debian 503 i386-netinst. When I place the install cd into the cd drive and boot from the cd a problem occurs at "Booting the kernel."
A message appears:
[0.116007] ..MP-BIOS bug: 8524 timer not connected to IO-APIC
Then the installation just "stalls" and never moves past this point.
View 1 Replies
View Related
Mar 24, 2011
How do I install an additional kernel in Linux Ubuntu 10.10, in case of a boot failure? Also how do I make the Grub Menu Visible, so that I am able to select multiple kernels. There is an older solution below, but is there a way to do this in Linux Ubuntu 10.10. I just suffered an update failure, possibly due to a corrupt kernel upgrade, which made my system unbootable. The cursor just flashed continuously.
Solution of 2007[URL].... "The next obvious rescue aid is to always have a working kernel installed. I usually work from a kernel updated via yum. Kernels have occasionally been released with flaws that have caused one or more of my machines to not boot. To this end, I always make sure I have at least one perfectly running kernel on a machine. A great way to handle this is to first add plugins=1 in your /etc/yum.conf file. The next step is to take this script (written by Jeremy Katz from Red Hat) and save it as n-installonly.py in /usr/lib/yum-plugins. You can change the number of kernels to retain on the system by changing the tookeep variable (default = 2).
With a known working kernel on your system, you can upgrade safely. If the new kernel is hosed, simply boot the old kernel to solve the issue with the new kernel be it to remove it, recompile it, or update it."
View 3 Replies
View Related
Feb 17, 2011
Is it possible to run Linux on Macs without any additional configuration such as Boot Camp/etc?
I have a SATA storage device that has presents a GUI to the user in a simple Linux installation, and ideally it should be platform independent, i.e. boot up into the GUI in all platforms. I'm having mostly success on various PCs, however, it's not booting up in a Macbook Pro that I have. AFAIK the MBPs and all modern Mac systems use EFI rather than BIOS, could this be the problem?
View 1 Replies
View Related
Jan 24, 2011
I had Xp installed and then installed Ubuntu on a second hard drive. Only Ubuntu will boot now. Here are the results from Boot info Script 5.5
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
[code].....
View 3 Replies
View Related
Feb 2, 2010
I wanted to read out a friend's windows hard drive, so I took the IDE connection from my CD drive and plugged it into the hard drive.
Now at boot time at the stage where it usually checks all partitions, linux complains about "zero length partition of that harddrive" and then stops giving me an emergency login.
Maybe that hard drive is actually faulty, even though I see all partitions correctly in windows. What can I do to make linux stop checking it? Is there a boot time option?
I suppose later I can manually mount a /dev/sdb or so device. I just have to figure out which
PS: what the easiest way to check which devices/partitions are available to mount?
View 8 Replies
View Related
Apr 25, 2011
I have this SATA drive, which I want to connect to my usb drive. Its installed with Ubuntu 10.04. I want to connect it to my laptop using a "SATA to USB connector" and then boot linux. So before I buy this connector/adaptor, can I know if it can be booted from USB?
Note: My laptop is loaded with Windows7.
View 3 Replies
View Related
Jun 21, 2010
I installed Ubuntu 10.04, and happened to have an Silicom Images PCXpress card plugged in, and it kindly added the sil_sata module.This is fine for this chip set.I think that my earlier installation of Ubuntu 9.04 used Libata, which does support NCQ and also has good legacy support for the Intel Intel ICH7 chipset I have inside my Sony Vaio SZ notebook. Also, libata also support Silicon Image chipsets as far as I can tell from URL...I wish to remove the Silicom Images SATA modules and replace this with libata and then test the performance between the two device drivers.
View 5 Replies
View Related
May 19, 2010
I have installed Xubuntu in English on an older laptop and it works beautifully. Xfce offers Abiword as word processor with an English dictionary. Owing to fact that I live in Europe I require further dictionaries in particular German.
View 1 Replies
View Related
Sep 26, 2010
I'm attempting to add an additional HDD to my system (without having to format it). I was told that I need to edit my Fstab. I'm trying to get an internal SATA drive mounted. I'm getting these two errors when I try and mount the drive DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
and
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
my Fstab is as follows.
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[code]....
View 9 Replies
View Related
