Ubuntu Installation :: Conky Sensors Not Working In Natty?
Apr 29, 2011
atlast i downloaded 64 bit version of natty. (i m currently using 10.10 32 bit). before i go for a clean install, i wished to test natty (the stable release) by running it from my usb stick. i was able to boot into it and natty identified my wi-fi with a breeze. i wanted to test some configurations that i had customized in maverick. i installed conky in natty and copied the conky script that i used in maverick. i also installed the necessary sensors. now the hitch is the sensors are unable to detect the temperature. is it coz i am running natty from a usb stick or some bug is there in this part ?
View 5 Replies
ADVERTISEMENT
Jun 10, 2011
i downgraded from 11.04 to 10.10 but now i can't get sensors detect to work with conky.
misc info:
64 bit Ubuntu 10.10
acer aspire 5742, i5 processor
lm-sensors version: 1:3.1.2-6
[Code].....
View 1 Replies
View Related
May 1, 2011
I recently upgraded to Natty and now Conky is no longer reading the temperature sensor. It permanently displays 0' Celcius. The temperature was displaying correctly before the upgrade and the mobo is brand-new.
View 9 Replies
View Related
May 1, 2011
I had a conky script which was working OK in Ubuntu 10.10, but I made a fresh install on friday, and when I went to restore my conkyrc, I saw it was not working properly. There is a problem in the calendar, and can't solve it. I've beeing trying it the hole weekend without success. The conky version is the same it was on 10.10 -> conky 1.8.0
let's see the problem : as you can see, the "today" day, is not being showed properly (it also happened yesterday and the day before, not only today) here it is my conkyrc:
Code:
# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=8
xftalpha 0.8
text_buffer_size 2048
[Code]...
View 9 Replies
View Related
Mar 3, 2011
I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.
View 3 Replies
View Related
Feb 21, 2010
I installed Karmic 64-bit on a new Phenom X4 Quad-Core PC. I've replaced the stock CPU cooler with a Cooler Master Hyper TX3, enabled all fan control settings in the BIOS, switched their profiles on silent, enabled the Cool n' Quiet option as well but my CPU fan is still noisy and seem to be running up to the max number of RPM, thus ignoring BIOS specifications. Besides this I can tell there is something wrong with it since even the CPU is on idle or with just the regular browsing, media player operations, PC sometimes freezes or is automatically rebooted .
I installed lm-sensors and went through all the sensors-detect operations (output attached to this post) but it doesn't show anything else but the CPU and HDD temperature which is always 40 Celsius degrees.
View 7 Replies
View Related
Oct 14, 2010
FC13 sensors not workingsensors-detect gives:Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
[code]....
View 2 Replies
View Related
Apr 30, 2011
I just upgraded to Natty, from Maverick and I can't get 'Workspace-Switcher' to work. As a matter-of-fact, I was completely dumbfounded when Natty launched for the first time, and I was presented with 'no' menus. What I got instead was some black-screen with some very attractive icons on it; but the icons had no organization to them that I could comprehend, and the categories that were presented didn't make any sense, based on the applications that I had installed. Apparently the designers of Unity thought that it would be a good idea for me to go 'fish' for my applications. Also, the most frequently used applications that I had pinned to gnome-panel disappeared, and I couldn't even rebuild them. The 3D menu, on the left, that combined my desktop icons, with the icons that were 'formerly' pinned to gnome-panel was also very attractive; but provided me with no useful functionality, other than complete disorientation and confusion. The scrolling was also slower than poo. All-in-all a very beautiful 'boat-anchor.' This distro should probably be renamed 'Virtual-Vista.' Fortunately, when I reenabled 'Desktop-Cube' and 'Rotate-Cube' and I think some other options related to Gnome, I got my menus and icons back. What a relief!!! I'm a power-user, and I have something on the order of 100 applications loaded. I just 'can't' go looking all-over-creation to find them...
Unfortunately, Workspace-Switcher could not be activated by clicking on it, only by <ctrl-alt-left/right arrow keys>. Also, unfortunately, all the desktops displayed the same applications. Definitetly 'not' a ready for prime-time player. I assume that this is a bug? Is there a work-around for this? If so, can someone please share it with me? For now I'm stuck with a ruptured-duck that can't swim. I usually have all four desktops populated, and switch between them whenever I have to wait on an application that's busy, or I get tired. I really 'need' this functionality.
P.S., It's more than Ok with me that a distro not be released, if it's not ready. I'd certainly prefer that to 'shock-and-awe.'
View 3 Replies
View Related
May 17, 2011
I am just trying out Natty for the first time. I'm having trouble installing sun-java. The iced-tea plugin which comes with firefox just doesn't cut it for pogo card games.I seemed to have installed it correctly because when I check my Software Manager there is a green check on all of the sun java6 stuff. But when I go to tools/addons/plugins the only thing there is the icedtea (no sun java6 plugin). I may have to go back to using linux mint.
View 2 Replies
View Related
May 4, 2011
After upgrading to Natty, my Alt/Win meta key option is no longer working.
I'm using System Settings -> Keyboard -> Layouts -> Options -> Alt/Win key behavior and selecting "Meta is mapped to Win keys".
However the Win key still just pops up the files-and-folders window, and meta is not there.
This worked fine in 10.10. Need this with Emacs...
View 4 Replies
View Related
May 12, 2011
I've just upgraded my Ubuntu version a week ago and got a problem that the Unity UI won't running after upgrade. My laptop is Dell Inspiron 14R which is i think is more than capable for running Unity 3D. When I rebooted after upgrade there was just a blank wallpaper screen, without Unity interface at all.
View 7 Replies
View Related
Jun 21, 2010
I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect
Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
[code]...
View 3 Replies
View Related
Jun 20, 2010
I'm trying to get weather installed/working for conky. In my .conkyrc file I have this code of line
Code:
${color white}${execi 1800 /home/rjr/weather/weather.sh 92392}
I have the 2 files weather.sh and weather.xslt in its own folder named weather and in weather.sh file I have this line of code..
Code:
# where this script and the XSLT lives
RUNDIR=/home/rjr/weather/
I gave permission to weather.sh file, on my desktop running conky in the weather section it says Invalid Partner Code. I tried even putting USCA1197 in the .conkyrc file instead of my zip code and still same problem. Do I have to give weather folder permission as well?
View 6 Replies
View Related
Mar 17, 2010
I just recently changed my motherboard, and now the command "sensors" shows "no sensors detected" I ran sensors-detect but still i get no sensors detected.
View 9 Replies
View Related
Oct 11, 2010
Has anyone else noticed this when installing conky-colors in Maverick?I know its not a problem with how I've configured it because it worked just fine in Lucid but here it is anyway:
Code:
./conky-colors --lang=english --theme=elementary --cpu=2 --swap --battery --updates --proc=10 --clock=modern --calendar --hd=simple --banshee=simple --network --eth=0 --
[code]....
View 8 Replies
View Related
Feb 25, 2011
Earlier on my wireless is attached as eth1 and it works on to load conky except the Network section is blank. After that I had renamed eth1 to wlan0 and checked at ifconfig it is working fine.Now the conky won't load and I think something to do with my wlan0.
View 1 Replies
View Related
Aug 14, 2011
I upgraded my Ubuntu 11.04 laptop to kernel 3.0.1 and when I try to start Conky using my custom conkyrc, the conky process dies. I played around with it and discovered (through trial and error testing) that the code for the CPU temperature crashes conky. It worked before the upgrade. how I can get the CPU temp monitoring working again in kernel 3.0.1? Here is the code that is crashing conky:
[Code]....
View 9 Replies
View Related
Jun 26, 2011
I have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
View 3 Replies
View Related
Mar 1, 2010
i noticed that almost every few seconds my conky just freezes for minute or-two after i add two torrents to download. Actually, it almost doesn�t work/stays freezed almost all the time.Is there something to fix this?
Code:
# Use Xft?
use_xft yes
[code]....
View 5 Replies
View Related
Aug 22, 2010
I have conky up and running, but today as I was messing around with the colors for the custom theme, the graphs for cpu temp and network up and down aren't displaying anything.
Here's my conky configuration:
./conky-colors --lang=english --theme=custom --color0=000000 --color1=800080 --color2=800080 --cpu=2 --cputemp --swap --updates --hdtemp1=sda --proc=3 --calendar --m --network --rhythmbox=oldvinyl --ubuntu --alllight --unit=F --clock=off
View 4 Replies
View Related
Nov 10, 2010
My Conky Gmail script is working beautifully. But it looks like this in Conky:
FROM: Jane Smith
"Forks and Spoons"
FROM: W. Able
"Golden Leaves"
FROM: Owen Harrison
"Passage?"
And I'd like it to show up like this:
FROM: Jane Smith
"Forks and Spoons"
FROM: W. Able
"Golden Leaves"
FROM: Owen Harrison
"Passage?"
Here's the script I'm using ("case s" specifically) -
Code:
#!/usr/bin/perl
use Switch;
use Text::Wrap;
my $what=$ARGV[0]; .....
View 1 Replies
View Related
Jun 13, 2011
Said that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
View 4 Replies
View Related
Apr 29, 2011
Looking at other threads i'm not the only one with this problem. after installing the proprietary driver, graphics are slow & 3D appears not to be working. fglrxinfo gives this:
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 2400 PRO
OpenGL version string: 3.3.10666 Compatibility Profile Context
No mention of "glx" or "direct rendering" as in previous versions. sudo aticonfig --initial -f gives this: Uninitialised file found, configuring. Fail to link to fglrx-libglx.so, please check whether driver is installed correctly Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.fglrx Apparently driver not installed correctly. Also there's no fglrx-modialases (or something) in synaptic thats been needed before.
View 9 Replies
View Related
Apr 30, 2011
when I try tu run impressive I get the following output:
Code:
Welcome to Impressive version 0.10.3-WIP Oops! Cannot load necessary modules: ('Unable to load OpenGL library', 'GL: cannot open shared object file: No such file or directory', 'GL', None) To use Impressive, you need to install the following Python modules:
[Code]...
View 1 Replies
View Related
Feb 1, 2011
when I type "conky" in terminal it returns with Conky: invalid configuration file '/home/user/.conkyrc' Conky: missing text block in configuration; exiting ***** Imlib2 Developer Warning ***** : This program is calling the Imlib call: imlib_context_free(); With the parameter: context being NULL. Please fix your program. I've tried completely uninstalling, rebooting, then reinstalling, still same error?
View 3 Replies
View Related
Apr 17, 2011
This is an Acer Aspire 5720, with a "Mobile GM965/GL960 Integrated Graphics Controller". Although I initially though this was a problem with my installation, so I ran both the Maverick and recent Natty live cds and the s video out only functioned on the Maverick cd. The computer acts as if there is another monitor, but the TV does not display one.
View 9 Replies
View Related
May 18, 2011
I want to try and get apache and php working on Natty. I have got apache displaying an index page but when i try to show a php file firefox just asks me if I want to save the file and doesn't display the file in the browser.I installed using some info from websites to install al LAMP Server which seems to have finished ok.I have tried using php from the command line to see what happens and it seems the html is being generated ok.
View 1 Replies
View Related
May 19, 2011
I've been working on this for weeks, and I can't get my egalax touchscreen to work with gestures in Natty. I believe I have been booting in Unity, but have tried in the traditional Gnome-top as well.
The screen just works like a one button mouse. I get out put from the mtdev-test, but nothing from gesture test. I've tried with and without the egalax-multitouch-driver-common installed.
There is no xorg.conf, but I don't think there should be one.
View 4 Replies
View Related
May 1, 2011
When I try to start Geany, it crashes with a segmentation fault. The current version is 0.20. I've tried to downgrade it to 0.19, but it didn't solve the thing.
View 2 Replies
View Related
May 1, 2011
Long story short, my HTPC has a keyboard, but no mouse.I'd gotten pretty good at working the machine with no mouse, but after my upgrade to Natty Narwhal today, the Ctrl+Esc shortcut to open the Applications window no longer works. Alt+F2 only works when another application is already open.I can get to the Applications menu using Ctrl+Alt+NumLock and mouse emulation, but it's pretty painful.Have I messed something up here? My install went a little messy, but I've managed to get everything else working and I doubt a keyboard control would be a bad install/upgrade.
View 2 Replies
View Related
