Ubuntu Installation :: After Upgrade Broken Unity Instead Of Plasma
Apr 29, 2011
Upgrade of kubuntu to 11.04 from 10.10 using kpackagekit appeared okay, as did the reboot and login from the new panel. Then, instead of seeing my custom background and plasma desktop all I see is the color wash of the Unity background. There is a right button menu in this desktop with a Create Launcher option that allows me to make launchers for konsole, firefox, and ksystemlog. Windows come up, but with Unity window decorations. Sure enough unity-window-decorator is running, but there is no plasma. System logs don't reveal anything obvious that failed. There is a kdm process running and kdeinit4 appears to have tried to start klauncher and kde4, but they are not actually running.It seems like somehow GNOME and Unity have somehow collided with the KDE environment.
View 1 Replies
ADVERTISEMENT
Apr 28, 2011
I am running Maverick Meerkat now, and will think about upgrading to Natty next week. I have a question--I run GNOME as the environment now, and if I do upgrade, will Natty replace it with UNITY?
View 9 Replies
View Related
May 5, 2011
I was running 10.10 with an Nvidia Quadro FX1500 and was able to get the effects (Compiz) working after following the manual driver install (found here) and editing my xorg.conf file. After this upgrade, Xserver (my desktop) wouldn't even launch. It just kept going into a terminal for log in. Not bad - better than not being to do anything at all. I removed all my nvidia drivers
Code:
sudo apt-get remove --purge nvidia-*
and then created a new xorg.conf file (and later moved to /etc/X11) using
Code:
Xorg -configure
That now allows me to log in to my desktop. However - no Unity. I've read that some people have had luck with the Nvidia 173 drivers, but not here. When I downloaded the current nvidia driver for my card (Quadro FX 1500) from nvidia, and went to install it manually using (from the directory where the download is)
Code:
sudo sh NVIDIA-Linux-x86-270.41.06.run
Eventually, it errors out with this: The compiler used to compile the kernel (gcc4.4) does not exactly match the current compiler (gcc4.5). For the record, I can't boot from a thumb drive ("boot error") or CD (both were created and tested on a Windows 7 machine.)
View 7 Replies
View Related
May 18, 2011
I recently upgraded to Ubuntu 11.04. Most of the upgrade went well except for one package (mpd). Ubuntu rebooted and went into a sexy-ish minimal grub. I launched Ubuntu, everything went fine. The only thing I can't seem to get working is Unity/Gnome. When I log on with kdm and choose 'default' or Ubuntu Classic, everything loads fine except for the taskbar/whatever interface. (I usually run wmfs instead of kde/gnome and I'm not sure which interface is currently installed right now. I have both kubuntu-desktop and ubuntu. )
I can still, however, right click and see my desktop/desktop icons. The only thing that does not load is the gnome/unity interface itself. I need it to manage my fonts to fix my wmfs fonts that got screwed up. (I'm using a bitmap font and it doesn't work unless I activate whatever settings I have to activate. )
I am not home right now and this was written on a phone. I apologize if this whole post seems confusing/total blabber. edit: Ubuntu Classic works fine, but Ubuntu/Default does not automatically launc the Unity interface.
View 2 Replies
View Related
Jun 4, 2011
I installed Ubuntu two ways, both by partitioning the hard drive and installing Ubuntu in its own partition, and also where the "run within Windows" option was available. I then upgraded both to Ubuntu 11.04. When I start Ubuntu in the "own partition" installation, Unity runs without complaint. When I start Ubuntu in the "run within Windows" installation, Unity baulks, giving an error message that I don't have some (unspecified) of the hardware it needs to run, and I am kicked back to the classic Ubuntu control screen setup. Obviously the two ways to install Ubuntu don't result in it having the same behavior. Alternately, since the version installed to "run within Windows" seems to do no such thing, and also gobbled up almost all the free space in my Windows-7 partition without prior warning, any clue how to uninstall that version cleanly?
View 1 Replies
View Related
Apr 15, 2011
X is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
View 1 Replies
View Related
Apr 28, 2011
If I just upgrade my 10.10 to 11.04, will it replace gnome with unity? I tried unity before and it is not satifying because it is not customizable, I feel I have less options and less power over what my interface looks like and how it behaves. Same case with gnome3.I'm wondering if when I upgrade to Naughty will I have to go through a lot of messing around with packages and configuration files to get back to gnome2 ? Do we have an option when we upgrade to choose between Unity, Gnome2 and Gnome3?
View 5 Replies
View Related
May 1, 2011
I was running Ubuntu 10.4 netbook version (with Gnome) on my Dell Inspiron 910 and yesterday it told me there was an upgrade available, to Natty. I followed the links, did the download, and left it to install overnight. When I got up today, it said it had a problem, because an application was using a file it needed. I thought I had closed everything before I started the process. I acknowledged the message, and proceeded to restart.
I ended up with the standard 10.4 Ubuntu screen, but with no tool bars, status bars, or anything. Just the wallpaper. Keyring login came up and I signed in, wireless said it was connected. So it looks like things are working, just no UI as such. Poked all the screen edges with the mouse, but nothing popped out.
Ctrl><Alt><Del> brought up the logout screen, and if I clicked on Help, I could ultimately get Firefox to run. (Note: the Help screen talks about Gnome, but it had the new popout scroll bars).
If I hold down <Shift> on startup, I get the GRUB menu. I am running linux generic 2.6.38-8 , but I am not sure where to go from there. Running dpkg didn't help.
View 4 Replies
View Related
May 12, 2011
I've just upgraded my Ubuntu version a week ago and got a problem that the Unity UI won't running after upgrade. My laptop is Dell Inspiron 14R which is i think is more than capable for running Unity 3D. When I rebooted after upgrade there was just a blank wallpaper screen, without Unity interface at all.
View 7 Replies
View Related
May 16, 2010
Am trying to upgrade from karmic 9.1 to lucid 10.04 and have the problem that as part of the upgrade I get a report that some packages are broken. As suggested posting the relevant files APT and MAIN Logs from the /var/log/dist-upgrade below.
View 4 Replies
View Related
May 26, 2010
I tried to upgrade my pc from 9.10 to 10.04 version with the alternative cd as the update manager was not showing the new release. There were some problem in installation and the process stopped somewhere. Then, when I tried with the update manager I got some error.
View 9 Replies
View Related
Jul 14, 2011
I've moved up from 10.10 to 11.04 today and I found that Unity cannot pass a simple SMB:// command to get to my windows servers. I finally read a thread on here stating to run natalius and magically it prompted me for password and I connected. Is this a feature of 11.04 or am I going insane?
View 1 Replies
View Related
Apr 17, 2010
I started an upgrade last night (from Jaunty to Karmic) using a "do-release-upgrade" command on a remote server via ssh. However, this morning, I discovered that the ssh connection between my machine and my server was broken.
I can see that the do-release-upgrade process is still running (well, a giant /usr/bin/dpkg is in the process list) and waiting for a response.
Is there any way I can take control of that session from my current session?
View 2 Replies
View Related
Apr 30, 2010
I've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
View 9 Replies
View Related
May 30, 2010
I've only been using Linux for a few days (Specifically - I installed Ubuntu 9.10 last week on my laptop for learning the OS and updated to 10.04 over the weekend). I have searched Google (and found answers) for every problem now except for this new one. I apologise in advance for the length but I wanted to include my own troubleshooting as well.
When I installed and setup Ubuntu Karmic - I added my work software. Autopackage wasn't installed by default so I used terminal's package install <filename> command for the first file - and double clicked on the rest to install.With the OS change I wanted to check to see if these packages would have problems installing on 10.04 (mostly to double check).First I checked my Manage 3rd Party Software to remove them - but all my entries here are blank. (I should have quite a few actually - I've done a lot of installing and downloading in the last few days).I double clicked to re-run them but that failed saying there was a problem with the packages. So I swapped to Terminal and found the following:
When I try to install a software package:
sudo package install "SMART Product Drivers 10.package"
Reply: package: can't open config file /home/test/.mailagent
If I type in just
[code].....
What's interesting, is checking my Fedora and Debian builds (I've done a lot of learning for only a few days! But I know a ton about grub 1 and 2 now) - I can't see a /home/test/.mailagent file or folder to copy either. The only thing I can think of is I have never setup an email account on my system (I've only been using it for a few days) and maybe the blank Manage 3rd Party Software tab is indicating a different problem.
View 4 Replies
View Related
Jul 8, 2010
I took the distribution upgrade from the update manager and can't boot now. Boot into a Live CD (ver. 9.10 - does that matter?), and go through the following steps.
ubuntu@ubuntu:~$ sudo fdisk -l
Warning: invalid flag 0x0000 of partition table 5 will be corrected by w(rite)
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ad56f
[Code]...
Anyone have an idea here? I have searched a lot and have only found a few references to this issue. Does the invalid flag message relate here? The partition is flagged as 'boot'.
View 9 Replies
View Related
Oct 12, 2010
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies
View Related
Feb 27, 2011
I have been upgrading 10.4 to 10.10, but in the middle of the new package download my computer turned off (outage). Now Ubuntu won't restart the upgrade or install the packages already downloaded; it tells me it "Could not determine the upgrade" and that unresolvable problems occurred, caused by held packages. How can I reset things to restart the upgrade?
View 4 Replies
View Related
Mar 21, 2011
I keep on getting this red " - " icon on my panel and I try to perform the upgrade it prompts me to do. But it says that there are 3 broken packages i need to fix with the "broken filter". How do I fix this so I can upgrade?
View 2 Replies
View Related
Apr 30, 2011
After upgrading my laptop from 10.10 to 11.04 I can no longer connect to my home wi-fi. It was working flawlessly for months before the upgrade. The network manager just keeps spinning and nothing happens.dmesg output just keeps showing this over & over again:
[ 1721.748149] ipw2200 0000:03:03.0: PCI INT A disabled
[ 1721.820199] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1721.820204] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[code]....
View 4 Replies
View Related
May 3, 2011
"Select windows when the mouse moves over them" does not work after an upgrade. I'm still using the Ubuntu Classic desktop configured for Metacity. Anyone know how to fix this without resorting to Unity?
View 1 Replies
View Related
Aug 23, 2011
After upgrading a 12 core Opteron hypervisor to the latest Lucid LTS patches, virtualization is broken. guests will not start using virt-manager.
The error message I get is: failed to retrieve chardev info with 'info chardev'
View 1 Replies
View Related
May 13, 2010
A couple of days ago, I upgraded my Kubuntu to Lucid. In this phase, the system reported that it was impossible to upgrade samba-common, and the installation aborted on 90%. Nevertheless everything is working but KPakageKit, which reports:
"There are broken dependecies on your system. Please use an advanced package manage e.g. Synaptic or aptitude to resolve this situation."
Neither "sudo aptitude safe-upgrade" nor "sudo apt-get -f install" solved the problem:
omen@darkstar:~$ sudo aptitude safe-upgrade
[..]:
samba-common
kubuntu-desktop .....
So the problem is really samba-common.
View 3 Replies
View Related
Jul 24, 2010
Last night I upgraded to Lucid from Karmic, and now I can't play any DVDs (physical or ripped). These worked fine in Karmic, but now when I select them, playback freezes on any menu, and I have to kill the front end process. Mythtv is set to use the internal player, but I have the same issue with VLC.
View 4 Replies
View Related
Jul 27, 2010
previosuly installed products that mapped keys, but I dont have and have never had any of them. reset the keyboard to default settings, which I happily did to no avail.
So for me, since I upgraded, keyboard input (either local or via VNC, so it isnt hardware) does nothing for either the caps lock key or the shift key. Kinda makes it imnpossible to eneter @ or any uppercase character, for example !
View 7 Replies
View Related
Jan 24, 2011
apache2: Syntax error on line 204 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/php5.load: Cannot load /usr/lib/apache2/modules/libphp5.so into server: /usr/lib/libxml2.so.2: undefined symbol: gzopen64 Have been running ubuntu server for about 6 months on a rickety but reliable AMD1.2GHz laptop (hp compaq nx9005) Had successfully deployed a UPS and various CGI scripts. Familiar with the basics of apache tomcat and even dabbled with some mods. All was running sweetly until I performed an upgraded yesterday which took me to Kernel (from uname -a) 2.6.31-22-generic-pae #70-Ubuntu SMP Thu Dec 2 00:54:52 UTC 2010 i686 GNU/Linux
During the upgrade there were libraries which apache2 depended upon and the process halted. Have brute forced some other libraries - given there were 87 packages in the upgrade and it had got to 78 - I did not dare roll back - so pursued further until I finally noticed the message above
[Code]...
View 1 Replies
View Related
Jan 28, 2011
I recently upgraded to Fedora 14 from F13 using Yum, it worked to my amazement except now yum appears to be broken because of a massive amount of dependency issues. It appears the old F13 packages are still around and yum is unable to get ride of them because their dependency with F14 packages of the same name. I tried yum distro-sync, and I tried yum resolvedep $(package-cleanup --orphans) --skip-broken but to no avail. Package--cleanup--orphans identifies all of the left over F13 packages.
I also can't install or upgrade anything using Yum, does give me a reason except the massive amount of dependency issues with the left over F13 packages. When I use the graphical software update it tells me among other things that Yum and RPM have updates but of course it won't update. I did follow the instructions and used yum update yum before I upgraded to F14, maybe it didn't take? Anyway to resolve this issue other than a clean install?
View 5 Replies
View Related
May 1, 2010
I was running Ubuntu 9.10 on my HP G70 laptop and did an upgrade using upgrade manager to Ubuntu 10.04.
Since I haven't been able to get wifi connection or wired working. The Network Manager applet is missing from the notification area and if I try to run nm-applet manually it says it is already running. I tried killing the process and then running it manually in the terminal and although the process appears to be running it is missing from the panel.
Booting into the live cd has the applet working fine so something in the upgrade process must have failed.
I tried changing the theme to see if it displays in other themes but had no luck.
I also tried to log into kde but kde seems to be broken. When I log into it after the splash screen all I get is a black screen with only my mouse pointer.
View 7 Replies
View Related
Jan 9, 2011
I have just upgraded KDE to 4.5 but after reboot and login i can't see my desktop. Only cursor, blank screen, and a window says:
Plasma Workspaces - The KDE Crash Handler We are sorry, Plasma Workspaces closed unexpectedly. You can help us improve KDE software by reporting this error
Details: Executable: KDEinit4 PID:3787 Signal: 8 (Floating Point Exception)
My PC:
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
GeForce 6100 nForce 405
openSUSE 11.3 32-bit
Using nVidia driver.
View 9 Replies
View Related
Apr 28, 2015
I got a rather big problem since an attempt to upgrade.My debian version is 8.0.I upgraded when apt proposed the change. I did that in two steps, with apt-get upgrade and then apt-get dist-upgrade, with the installation of a new kernel. I moved from 3.2.0-4-686-pae to 3.16.0-4-686-pae.Since the upgrade, I can't boot my system any longer.During the boot sequence, this message appears with a countdown (it's copied by hand) :
Code: Select all(1 of 4) a start job is running for dev-disk-byX2du
At the end of the countdown, the boot sequence starts again, and ends up on an invite to log in as root in rescue mode. I can't connect (maybe due to some azerty/qwerty issue, I got a French keyboard. I tried to type in "qwerty mode", with no success (the password is not prompted)).I can connect with the 3.2 kernel however, selecting it form the grub interface. I can't log in in rescue mode either, but with this kernel the boot sequence goes on and I can log as a regular user or as root, at the end of the boot sequence. There is no X, but the system seems to work.What could I do to make the system boot properly with the new kernel, or to go back to the 3.2 version ?
View 14 Replies
View Related
