I've tried running the regular package upgrade as well as the alternate cd (i386) upgrade from 10.04 to 10.10. This is the error I keep getting no matter how I try to upgrade: Error during commit 'E:Couldn't configure pre-depend x11-common for x11-xkb-utils, probably a dependency cycle.' Restoring original system state
View 9 RepliesI have installed php 5.3.6-4 on centOS 5.6. When i try to install some modules of php then it gives an error
php53-common-5.3.3-1.el5_6.1.i386 from updates has depsolving problems
--> php53-common conflicts with php-common
Error: php53-common conflicts with php-common
[code]....
I have reinstall it twice but each time i get same error.
I'veopenoffice.org 3.0. I tried to upgrade it to oog3.1 via terminal by the command sudo apt-get update && sudo apt-get install openoffice.org 3.1 my terminal shows; the lines above these are not shown W: GPG error: http://ppa.launchpad.net intrepid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 632D16BB0C713DA6 W: You may want to run apt-get update to correct these problems Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package 3.1 I got the same results when I tried the commands with firefox 3.5.
View 2 Replies View RelatedI am a web designer and don't know anything about servers. My server service provider use Linux environment and sometime it would be much easier for me to have a local server to test my websites. So I have install a fresh copy of Ubuntu 10.04 to one of my computer. Half way installation, the system tell me something like couldn't configure the DHCP, I have checked that my router has enabled DHCP servers (D-Link 615). After installation and logon, I use sudo pppoeconf command and try to set the network.
But it said something like no PPPoE access. I know I am very dull, and maybe get ban from this forum because I have not read the instruction, it will be great if you can point me to the right page. All I want to do is have something like a web space + MySQL and support PHP to work with.
I was upgrading from 10.10 to 11.04 with terminal. When terminal asked about mime.types (it asks what to do with it) I chose showing me the differences between the new and the old versions. and then I couldn't get out from the "showing differences menu"! so, I shut down the terminal. and now I'm afraid to reboot the computer. can someone possibly say, what i am to do next is it okay to reboot my computer. or do i have to do smth first? Oh, and i almost forgot, when i sudo do-release-upgrade i says that i have latest version and doesn't do anything. update manager isn't showing up neither
View 5 Replies View RelatedCode:
E: empathy-common: subprocess installed post-installation script returned error exit status 2
E: empathy: dependency problems - leaving unconfigured
E: nautilus-sendto-empathy: dependency problems - leaving unconfigured
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
My problem is that I am unable to do a routine upgrade of packages. When I try to perform an upgrade, the following occurs:
Code:
$ sudo aptitude dist-upgrade
Reading package lists... Done
Building dependency tree
[code]....
If I try to install another package, I get the following message:
Code:
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: Internal error: couldn't generate list of packages to download
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies View RelatedTrying to upgrade a laptop from Ubuntu 10.10 to 11.04, and I get the following error...Note, that there are 3 "files" that come up with this message...
W: Failed to fetch [url] 404 Not Found
E: Some index files failed to download, they have been ignored, or old ones used instead.
And then drops out of the upgrade utility
I get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
Could someone look this over and give me the details on how i remove the package or program that did not recomplie correctly and doesnt behave right. Its called Novacom i was using it when testing some tethering with my palm pre, but as you can see in the terminal output below everytime i install a new package i get the same error about trying to recompile novacom. Im new to Linux but really liking not being on windows any more.
Unpacking kooldock (from .../kooldock_0.3-1ubuntu3_i386.deb) ...
Processing triggers for man-db ...
Setting up palm-novacom (0.3-svn177284-hud9) ...
stop: Unknown job: novacomd
[Code]...
Trying to load some apps like dosbox and virtualbox I get the following error:
Code:
after i've upgraded to 10.4 and after i've upgraded LTSP the system gives me the following error:
[code]....
Is there someone who knows what I should do?
Error during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
During upgrading from 8.04 to 10.04, I was asked several times what I wanted to do with menu.lst. I gave the same reply each time: "keep the local version currently installed". I wanted it the way I had when using 8.04; that is, not having the un-customizable grub menu I've experienced before with 10.04.
When I was done installing 10.04 and was going to reboot, the GRUB menu appears as it has before, and the Ubuntu entry says "Ubuntu 8.04", even though it's now 10.04. But when I choose "Ubuntu 8.04", the following error message occurs:
Code:
error sending message: Connection refused
udevadm[900] error sending message: Connection refused
udevadm[901] error sending message: Connection refused
udevadm[902] error sending message: Connection refused
error: unexpectedly disconnected from boot status daemon
[Code]...
I was upgrading from 10.04 to 10.10 but my laptop battery went down so the installation did not ended up correctly.
When trying to reboot now, the system is not able to start correctly. No desktop, no icons... nothing.
Starting in recovery mode is impossible too.
Now I am running with live cd.
I recently upgraded from Maverick to Natty. The upgrade process went fine and I am able to log in to Natty and use my computer fine.
However, during the installation there was an error upgrading likewise-open from 5.0.xx to 6.0.xx. I thought perhaps removing likewise-open 5.0.xx and installing 6.0.xx (instead of upgrading) may fix the problem.
This what I get:
Code:
I want to upgrade my 32bit Fedora from 11 to 13 version. I tried both options: via preupgrade tool and via installation media (DVD). Both options failed with following Anaconda error at the beginning of installation process:
RpmUtilsError: RPM Error opening Package
In my case, the problem was in package:
/mnt/sysimage/var/cache/yum/anaconda-InstallationRepo-xxx.i386/packages/fontpackages-filesystem-1.44-1.fc13.noarch.rpm.
I switched to terminal, and discovered that size of this file is 0.
I downloaded installation DVD from official torrent, so checksum was autmatically checked. Verification test at the beginnig of installation was also successfully passed. So media is OK. Moreover, I also tried to upgrade via preupgrade tool with the same results.
I found similar bug with unclear status in Fedora Bug Tracking system for Anaconda in F12: [URL]
When I use a package manager (aptitude or synaptic) to install updates to firefox (3.6), I get the following error:
[Code]...
I tried to upgrade to 10.04, but did not succeed. Error: You have held broken packages.
View 2 Replies View Relatedwhile i was upgrading ubuntu 10.10 to 11.04 when I restarting the PC I got this error
error: the symbol 'grub_putchar' not found"
i have installed this Ubuntu in virtual-box running in windows xp. my INTERNET connection is working fine but i m using proxy for that. my problem is that when i want to install something through sudo apt-get install xxxx(whatever) it gives error "Couldn't find package".
Example:
#sudo apt-get install wine
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package wine
I am not able to install linux key logger on my ubuntu 10.04 is my os this is the result that i got user36@lib-desktop:~$ sudo apt-get install lkl Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package lkl user36@lib-desktop:~$
View 9 Replies View RelatedWhen I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
I downloaded truecrypt Linux version, giving me a file named truecrypt-6.3a-ubuntu-x86.tar.gz. I assume that's the archive. Double clicking on that produced file truecrypt-6.3a-setup-ubuntu-x86. I assume that's the executable. When I try to run that, I get a "could not display ... unknown filetype" error. Could someone tell me what I'm doing wrong? I plan to run truecrypt under the easycrypt GUI.
View 9 Replies View RelatedWhen upgrading from fedora 10 to fedora 12 (after reboot and during installation) I get the error message as - Error running transaction - you need more space on the following file systems : 23 M on /mnt/sysimage/boot
After this installation stops.
I checked /mnt , there is no folder as sysimage . Please suggest how to proceed further ?
After preupgrading without problems, I did not reboot the computer inmediatly. I was surprised that, although preupgrade had finished, the terminal window was yet active and I closed it. On reboot, in the Grub window, one of the options is "Actualizar a (upgrade to) Fedora 14". If I select it I get: "Booting 'Actualizar a Fedora 14 (Laughlin)'
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=02f7302b-aa56-4c33-b533- fa1549aa0860:/upgrade/ks.cfg stage2=hd:UUID=02f7302b-aa56-4c33-b533-fa1549aa0860:/upgrade/install.img initrd /upgrade/initrd.img
Error 15: File not found
Press any key to continue....."
and pressing a key it returns to the Grub window. The /upgrade directory doesn't exist, but it does the /boot/upgrade where the vmlinuz is. uninstall and reinstall the preupgrade, rebooting inmediatly, but I don't know how to uninstall and if this is the solution. How can I uninstall the preupgrade?
I am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
I have just tried to upgrade to Ubuntu 10.10 from 10.04 using the update manager
It asks me for me password and then a window opens saying "Upgrading Ubuntu to version 10.10"
It gets to "setting new software channels" then a message pops up saying "third party sources disabled" next a little error icon appears in the Notification Area then another message saying: Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
-Upgrading to a pre-release version of Ubuntu
-Running the current pre-release version of Ubuntu
-Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.