I was upgrading from 10.04 to 10.10 but my laptop battery went down so the installation did not ended up correctly.
When trying to reboot now, the system is not able to start correctly. No desktop, no icons... nothing.
Starting in recovery mode is impossible too.
Now I am running with live cd.
I have problem starting clamd. It's unable to execute setgroups()
/etc/group , /etc/password files are world readable
Here is output after starting clamd:
sudo clamd
ERROR: setgroups() failed.
Here is strace clamd output:
...
open("/etc/passwd", O_RDONLY|0x80000 /* O_??? */) = 3
fcntl64(3, F_GETFD) = 0x1 (flags FD_CLOEXEC)
_llseek(3, 0, [0], SEEK_CUR) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=1616, ...}) = 0
mmap2(NULL, 1616, PROT_READ, MAP_SHARED, 3, 0) = 0xb7f6d000
_llseek(3, 1616, [1616], SEEK_SET) = 0
munmap(0xb7f6d000, 1616) = 0
close(3) = 0
setgroups32(1, [120]) = -1 EPERM (Operation not permitted)
write(2, "ERROR: setgroups() failed.
", 27ERROR: setgroups() failed.) = 27
exit_group(1) = ?
Process 29002 detached
ls -al /etc/group:
-rw-r--r-- 1 root root 1013 2010-03-19 11:38 /etc/group
ls -al /etc/passwd:
-rw-r--r-- 1 root root 1616 2010-03-05 12:39 /etc/passwd
/etc/passwd:
clamav:x:108:120::/var/lib/clamav:/bin/false
/etc/group:
clamav:x:120:
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
I have a virtual machine on VirtualBox.I had Fedora 11, all was well.I ran the "preupgrade" tool. It downloaded all successfully, it asked me to reboot.On reboot, it installed everything as it should. It finished by saying it was installed successfully and asked me to reboot one last time.Now when I start it, some text flashes rapidly on the screen. Then it stops.See attached file for screenshot of the last text shown.
View 14 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
I've just upgraded my server installation from 9.04 to 9.10. I'm running this as a Xen virtual machine. All seemed to go well until I restarted, at which point I got stuck at this point:
Begin: Running /scripts/init-bottom ...
Done.
mountall:/proc: unable to mount: Device or resource busy
mountall:/proc/self/mountinfo: No such file or directory
[code]...
My service provider is running xen-shell 1.0.79 running on Xen version 3.0.3-1, and after the seemingly-successful do-release-upgrade, uname -r reports ubuntu kernal 2.6.18-5-xen-amd64. Unfortunately, this isn't mentioned as a possible problem here [URL]
I am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
After upgrading to 10.10, I have been unable to use the software center to install. Every time I click 'install', the install progress bar just hangs, reading 'Waiting for apt-get to exit'. The same thing happens when attempting to install upgrades via Update Manager.
I can however update via Synaptic and using 'apt-get upgrade' in the terminal.
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
Pre update (10.10) Synaptic Package Manager would allow me to delete residual config files by clicking the Apply button after marking them. Post update, the Apply button does not highlight or allow me to click it when I mark packages for complete removal.
View 9 Replies View RelatedTrying to upgrade a laptop from Ubuntu 10.10 to 11.04, and I get the following error...Note, that there are 3 "files" that come up with this message...
W: Failed to fetch [url] 404 Not Found
E: Some index files failed to download, they have been ignored, or old ones used instead.
And then drops out of the upgrade utility
Could someone look this over and give me the details on how i remove the package or program that did not recomplie correctly and doesnt behave right. Its called Novacom i was using it when testing some tethering with my palm pre, but as you can see in the terminal output below everytime i install a new package i get the same error about trying to recompile novacom. Im new to Linux but really liking not being on windows any more.
Unpacking kooldock (from .../kooldock_0.3-1ubuntu3_i386.deb) ...
Processing triggers for man-db ...
Setting up palm-novacom (0.3-svn177284-hud9) ...
stop: Unknown job: novacomd
[Code]...
Trying to load some apps like dosbox and virtualbox I get the following error:
Code:
after i've upgraded to 10.4 and after i've upgraded LTSP the system gives me the following error:
[code]....
Is there someone who knows what I should do?
Having all kinds of trouble with my video drivers after upgrading to 10.04 The error message I get is
Unable to initialize PCS database Missing PCS default file .etc/ati/amdpcsdb.default No devices I keep reinstalling my video drivers from the ati-driver.run file for my radeon 2400 card - seemingly successfully - but it doesn't seem to help and when I reboot i just get the limited video function
After upgrading my server from 10.04 to 10.10 I keep getting the following php error, "PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/syck.so' - /usr/lib/php5/20090626+lfs/syck.so: cannot open shared object file: No such file or directory in Unknown on line 0"
View 1 Replies View RelatedError during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
During upgrading from 8.04 to 10.04, I was asked several times what I wanted to do with menu.lst. I gave the same reply each time: "keep the local version currently installed". I wanted it the way I had when using 8.04; that is, not having the un-customizable grub menu I've experienced before with 10.04.
When I was done installing 10.04 and was going to reboot, the GRUB menu appears as it has before, and the Ubuntu entry says "Ubuntu 8.04", even though it's now 10.04. But when I choose "Ubuntu 8.04", the following error message occurs:
Code:
error sending message: Connection refused
udevadm[900] error sending message: Connection refused
udevadm[901] error sending message: Connection refused
udevadm[902] error sending message: Connection refused
error: unexpectedly disconnected from boot status daemon
[Code]...
I recently upgraded from Maverick to Natty. The upgrade process went fine and I am able to log in to Natty and use my computer fine.
However, during the installation there was an error upgrading likewise-open from 5.0.xx to 6.0.xx. I thought perhaps removing likewise-open 5.0.xx and installing 6.0.xx (instead of upgrading) may fix the problem.
This what I get:
Code:
I want to upgrade my 32bit Fedora from 11 to 13 version. I tried both options: via preupgrade tool and via installation media (DVD). Both options failed with following Anaconda error at the beginning of installation process:
RpmUtilsError: RPM Error opening Package
In my case, the problem was in package:
/mnt/sysimage/var/cache/yum/anaconda-InstallationRepo-xxx.i386/packages/fontpackages-filesystem-1.44-1.fc13.noarch.rpm.
I switched to terminal, and discovered that size of this file is 0.
I downloaded installation DVD from official torrent, so checksum was autmatically checked. Verification test at the beginnig of installation was also successfully passed. So media is OK. Moreover, I also tried to upgrade via preupgrade tool with the same results.
I found similar bug with unclear status in Fedora Bug Tracking system for Anaconda in F12: [URL]
I have upgraded from Centos version 4.x to 5.5 and my installation of UGS NX 6.0 was installed under Centos 4. NX was working fine in Centos 4, but when I try starting it under Centos 5, I get the following:
ERROR: unable to start NX Check: X windows is running, :0.0 is valid, and X display has been authorized on :0.0.
When I use a package manager (aptitude or synaptic) to install updates to firefox (3.6), I get the following error:
[Code]...
I tried to upgrade to 10.04, but did not succeed. Error: You have held broken packages.
View 2 Replies View Relatedwhile i was upgrading ubuntu 10.10 to 11.04 when I restarting the PC I got this error
error: the symbol 'grub_putchar' not found"
When upgrading from fedora 10 to fedora 12 (after reboot and during installation) I get the error message as - Error running transaction - you need more space on the following file systems : 23 M on /mnt/sysimage/boot
After this installation stops.
I checked /mnt , there is no folder as sysimage . Please suggest how to proceed further ?
After preupgrading without problems, I did not reboot the computer inmediatly. I was surprised that, although preupgrade had finished, the terminal window was yet active and I closed it. On reboot, in the Grub window, one of the options is "Actualizar a (upgrade to) Fedora 14". If I select it I get: "Booting 'Actualizar a Fedora 14 (Laughlin)'
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=02f7302b-aa56-4c33-b533- fa1549aa0860:/upgrade/ks.cfg stage2=hd:UUID=02f7302b-aa56-4c33-b533-fa1549aa0860:/upgrade/install.img initrd /upgrade/initrd.img
Error 15: File not found
Press any key to continue....."
and pressing a key it returns to the Grub window. The /upgrade directory doesn't exist, but it does the /boot/upgrade where the vmlinuz is. uninstall and reinstall the preupgrade, rebooting inmediatly, but I don't know how to uninstall and if this is the solution. How can I uninstall the preupgrade?
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
View 1 Replies View RelatedI have just tried to upgrade to Ubuntu 10.10 from 10.04 using the update manager
It asks me for me password and then a window opens saying "Upgrading Ubuntu to version 10.10"
It gets to "setting new software channels" then a message pops up saying "third party sources disabled" next a little error icon appears in the Notification Area then another message saying: Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
-Upgrading to a pre-release version of Ubuntu
-Running the current pre-release version of Ubuntu
-Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
I have been windows using for over years and now after seeing Linux in couple of colleagues desk, I liked and have installed Linux in my home desktop (Fedora 14). After installing Fedora 14, I tried upgrading my browser Firefox from 3.6.17 (which came by default) to Firefox 4.0. I googled and got the procedure for upgrading tirefox. from this link [URL]. I followed the exact steps and while I tried to install I get the following error. I tried enough to get rid of this problem but all attempts in vain.
The Error that I get is:
[root@localhost yum.repos.d]# yum install firefox4
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora-firefox4. Please verify its path and try again
[root@localhost yum.repos.d]# yum install firefox4
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
repos.fedorapeople.org/repos/spot/firefox4/fedora-15/i386/repodata/repomd.xml:
[Errno 14] HTTP Error 404 : repos.fedorapeople.org/repos/spot/firefox4/fedora-15/i386/repodata/repomd.xml
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora-firefox4. Please verify its path and try again
[root@localhost yum.repos.d]# ls