I'm trying to install the Rosetta Stone v3.3.5 for Ubuntu 9.1 and here's what happens. I open the RosettaStoneSetup.exe with Wine and after the files extract and I agree to the terms the installation starts. The progress bar fills to the end and then I get a popup telling me that the installation ended prematurely.
View 2 RepliesUsing F11, when the Rosetta Stone 3 application cd is inserted it is mounted but no files appears. df -h shows it is mounted (/media/RS_App) with 409M but it appears empty when you list it. The cd drive does work on other cds, and the application the cd itself works in Windows. Wine hq says it works but I cannot find the problem and I found one person using Ubuntu with a similar problem but there was no answer on how to fix.
View 1 Replies View Relatedwell i think the tittle gives my question... how can i install Rosetta stone in my ubuntu 10.4
View 2 Replies View RelatedI really need Rosetta Stone so I can get an extra aide while I study Japanese in university, however it doesn't seem to be working for me. It worked perfectly in 9.10 and 10.04, but in 10.10 it doesn't work. After I click my account name it just leads me to a blank page.
View 9 Replies View RelatedI would really like help trying to install rosetta stone with wine....it said it is a non executable file?
View 4 Replies View RelatedI'm trying to get a Rosetta Stone torrent to work with WINE with no luck,
View 1 Replies View RelatedI have heard that Rosetta Stone runs well under Wine so I am attempting to install Rosetta Stone V3.x on my openSuSE 11.3 computer. I am tired of switching back and forth to Windows just to use this one program. When I insert the RS Application CD and mount it, no files show up. I have let HAL mount it, I have mounted it from the command line, and have made an image with K3B and then mounted the image but no matter what I do I cannot view any files.
I have tried to view the files with Dolphin, MC, and used ls from the command line with nothing showing up. K3B made a 408.8 MB iso file so something is on there. How can I access these files so that I can install Rosetta Stone?
My thread is both an information and a discussion/question thread. First of all the information. I have long searched for a solution to my desire for Rosetta Stone in Wine but could not get it to recognise my microphone.
Finally today I removed (uninstalled) pulseaudio. It took a few packages with it and I am waiting to see what effect they will have. But finally, by checking the ALSA Driver in the Wine configuration, along with uninstalling pulseaudio, my Rosetta Stone works perfectly. A great deal better than in my XP Virtualbox Virtual Machine. Stoked! For those who are interested I have Wine 1.1.42-0ubuntu4 installed, Rosetta Stone 3.4.5 and am using a Dell XPS M1530 with Ubuntu 10.04 64-bit OS. It's been a long time!!!
My question part relates to the removal of pulseaudio. There have been no obvious negative effects as yet, and from my readings it would seem there shouldn't be, however I am concerned at the other packages it took with it (dependencies). Can anyone give any further advice/info here? I know for sure it took the package ubuntu-desktop which when I try to reinstall it tries to drag pulseaudio and all it's associated packages along with it. Can I/we live without these dependent packages? If not how can I get them back without pulseaudio?
I am running Ubuntu 10.04 and WINE 1.2. WineHQ APPDB states that Rosetta Stone is not installable. I have installed it, so the information there is not correct/complete. When I installed, it ran perfectly. I created an ISO of the install disc and the first lesson. I then loop mounted each of them in turn for them to run and assigned each of them a windows directory, configuring them as CD-ROM. This worked perfectly the first day. Now it no longer works with the ISO or with the original disc. I have run the program in terminal and received the following output:
Quote:
err:ole:CoGetClassObject class {96749377-3391-11d2-9ee3-00c04f797396} not registered
err:ole:CoGetClassObject class {96749377-3391-11d2-9ee3-00c04f797396} not registered
err:ole:create_server class {96749377-3391-11d2-9ee3-00c04f797396} not registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {96749377-3391-11d2-9ee3-00c04f797396} could be created for context 0x17
[Code].....
I have seen similar outputs on the forums, but nothing that included that AUDIO ERROR. This seems to be an issue of time. If I don't do anything, the program will crash giving me error 5118. If I run through lesson select and mic testing quickly then I can get all the way to the lesson before it crashes with the same error.
I installed Rosetta Stone v3.4.5 using wine on Fedora 12. Seems like the program was installed fine. When I launch the program it is asking me to insert the language CD. I have the iso files instead of CDs. I tried mounting them but still Wine/Rosetta Stone is not able to detect the mounted iso. Can someone give me a clue as what should I try?
View 3 Replies View RelatedAbout 3 months ago I got Rosetta Stone (version 3) working under Ubuntu using Wine, after some weeks trial and error. It was still working at the end of July, after which I didn't attempt to use it until last week. It no longer works, and I suspect this may be because in the meantime I upgraded Wine to version 1.2 - I'm not sure what version I upgraded from; possibly 1.1.43. If I start it by right-clicking the .exe file name and choose "Open with Wine Windows Program Loader", the task bar shows "Opening RosettaStoneVersion3" for a few seconds. Nothing else happens. If I execute it from a terminal - i.e. type "wine RosettaStoneVersion3.exe" while in the Rosetta Stone folder, nothing at all is output.
View 2 Replies View Relatedrosetta stone has had the mic function work before under wine but for some odd reason when i do the mic test it doesn't work i activated all of the drivers in wineconfig and still nothing what might be the problem here i am using rosetta stone v3
View 7 Replies View RelatedI'm very new to Ubuntu. Now that I have it installed, my computer doesn't recognize my external hard drive or flash drive. How do I access my external hard drive and flash drive? I'm also trying to get Rosetta Stone to work using Wine, but having a heck of a time. I've searched the forums and have found some similar topics, but nothing that really helped me.
View 6 Replies View Relatedi successfully installed rosetta stone and now i want to install a language pack but that requires the cd drive how do i give wine access to the cd drive so i can install a language pack
View 1 Replies View RelatedI installed TRS mostly successfully (sometimes the installer crashed, too), but sometimes it works for a while, and sometimes it keeps crashing. It does not crash on any particular lessons.
Also, the mic doesn't work, but that's of less importance right now. I just do *not* want an ISO of Win-doze taking up my hard disk...want to move everything to Linux. FYI, the audio works in Wine, but it's soft. (Playing the same sounds with "aplay" in Slackware and "Winamp" in Wine, which I also tested, the volume is different! I don't care about Winamp...just used it for testing.)
I know version 1.7 of The Rosetta Stone is really old, but I wonder if anyone has successfully used it under Wine?
I'm Running Slackware 13.0 and details of my test are in the App Database:
http://appdb.winehq.org/objectManage...rsion&iId=8581
Running ver 9.10 with Wine installed. Up untill about 2 mos ago Wine loaded 'Rosetta' ok. I tried last week and get Application Error. "Cannot create needed files of not enough disk space". I have over 35 gb unused space. I removed wine (purged) and re-installed -- still no good. It however works on my laptop that has same configuration (9.10)??
View 2 Replies View RelatedI did a clean install of fedora 13 on my sys, however when i run
Code:
rpm -qa |grep fc12
lots of and lots of fc12 packages pop up. below is the list. if there is fc13 version of these packages, and if there is (which I suspect for at least some of them there should be) why my sys doesn't update to those packages?
here is the list of fc12 packages:
Code:
~$ rpm -qa |grep fc12
ctan-cm-lgc-fonts-common-0.5-17.fc12.noarch
plexus-compiler-1.5.2-4.3.fc12.noarch
texlive-texmf-errata-fonts-2007-7.fc12.noarch
[code]....
I have a fresh install of ubuntu 10.04 lucid .... When I went to download some files via firefox, I noticed that the downloads would stop before the download is complete. I tried to download a small 8MB file and it reached almost 4MB then the download simply stopped and firefox incorrectly informed me that the download was finished.. I tried several more downloads after that of various other files and the same thing happens. I have never had trouble downloading files before. I upgraded to firefox 3.6.13 before I noticed this problem so I do not know if it was doing it before I upgraded as this is a fresh ubuntu install.
View 2 Replies View RelatedSed seems to react to the presence of "" in its input if the immediately following character makes the pair a recognizable code. In the code following see that the "a" and "" are missing in the output, and that the "c" caused sed to terminate at that point. Is there any way to prevent it reacting like this?
Code:
g y="the shell built-in command. The following character sequences
> have special meaning:
> a Alert (bell).
> Backspace.
>
> c Suppress trailing newline.
> f Form feed.
>
[Code]....
I tried to install 11.3 today but no luck so far. I installed it 3 times from GNOME liveCD and once from a LiveUSB both didn't work. With the CD, it restarts before installing initrd, GRUB tells me :
error 15 : file not found.
I verified both the image I downloaded via md5 and the CD I made and they both are OK.
so I am bored of how I arranged my desktop and I was searching for something new.Is there any application that will guaranteed work with KDE?
I tried this once with an application that I run in Ubutnu but the next time I turned on my laptop something horrible happened.My KDE was turned into Gnome,but with worse graphics!-something like Xfce-
I've just upgraded one of our workstation to Lucid, in order to test.Well, it was a good idea because now one of our Java application is not working anymore. After investigation, I discovered that the upgrade removed qtjambi.I reported the bug here*: URL....But I want to know if someone has any idea about :
- why was qtjambi removed ?
- what can we do to run a qtjambi application ?
- Am I the only one in the Ubuntu world to use Qtjambi and to have this problem*?
I need assistance blocking application in Ubuntu 10.04. block all applications for certain users if they do not exist in a certain directory.For example,we would like to prevent users from launching a portable copy of Firefox from a portable HDD or Flash drive.
View 1 Replies View RelatedCan you use a KDE application on a Gnome interface?
View 1 Replies View RelatedIn installin application from rpm packages...
View 4 Replies View Relatedunable to run opencv opllications on ubuntu(10.04)error:OpenCV Error: Unspecified error (The function is not implemented. Rebuild the library with Windows, GTK+ 2.x or Carbon support. If you are on Ubuntu or Debian, install libgtk2.0-dev and pkg-config, then re-run cmake or configure script) in cvNamedWindow, file /home/p/OpenCV-2.0.0/src/highgui/window.cpp, line 100.
View 2 Replies View RelatedI recently got a new desktop, and did a fresh install of Ubuntu 9.04 Jaunty Jackalope. The reason I installed 9.04 is because the laptop I have been on for the last 7 years or so suddenly stopped operating with grub updates. I would t urn the computer on and it would never get past the 'grub loading' screen. but thats a whole different story. So I did a fresh install of 9.04 off of a startup disc I made a while back. Then I copied my /home file from my laptop (the old one) and inserted it into the new desktop's /home directory. Worked like a charm (more or less), and all my settings were transferred to my new computer. Desktop, Preferences, Admin stuff, I can't find a problem with it. Now for the applications.
I've tried multiple how-to's but none of them have worked. I found one that told me to do the following in terminal. Keep in mind, although I've been running Ubuntu for about three or four years now, I would still consider myself a noob. Anyway:
sudo dpkg --get-packages <filename><destination>
this left me with a text only file called 'package.selections' I was then to copy this file into the home folder on the new computer and run the following:
sudo dpkg --set-selections <directory>
Up until that last command, everything worked just fine. The list had tons of package titles (none with a .deb or anything though) and their state, got it on to the new computer and ran the code only to get the following error:
dpkg --set-selections does not take any argument
So i ran it without the directory, and it gave me a new line. So I typed in the directory and it gave me the following:
dpkg: unexpected end in package name at line 1
I've tried numerous other commands changing up the syntax as I go, but haven't gotten any farther. My goal is to have all the same applications installed on my new rig without having to go and install all the packages one by one.
I have an application installed under the directory /home/ubuntu/MyApplicationI have a symbolic link on the desktop to a launch.sh script inside the MyApplication directoryLaunch → /home/ubuntu/MyApplication/launch.shI have ubuntu(10.10) running on a usb flash drive. I want to allow other user's to run the application by using the link on the desktop but I want to keep the installation folder private. So the users can run the application but they are unable to view or copy the files inside the installation folder.
View 8 Replies View RelatedI am trying to figure out how to install this program i found atIt is a simle application that monitors systems.I have uncompressed it but i cant figure out how to install it.it's driving me nuts reading many websites on installing things and getting no place after a week.
View 3 Replies View RelatedI installed LDOCE5 on Unbuntu 10.04, but when run file ldoce5.desktop then there a message:
Untrusted Application Launcher
The application launcher "ldoce5.desktop" has not been marked as trusted. If you do not know the source of this file, launching it may be unsafe.