Ubuntu Installation :: Printing After Upgrade To 11.04?
May 16, 2011
I recently upgrade from Ubuntu 10.10 to 11.04,However when I tried my printer (HP Color Laser jet 3550), I encounter a PCL XL error. After googling around,I Installed the latest HPLIP driver (hplip-3.11.5.run). Now I have a peculiar situation,some time it prints ok, however most of the time I can print .doc and text files, however,if I try to print a pdf file I get the PCL error. In addition, the printer mixes the colors, or neglects to print one.I tried printing the pdf files directly with lp -d printer files, and sometimes it works and sometimes it does not. I have seen on other post most of the problems individually, but I have not seen any solutions.
View 1 Replies
ADVERTISEMENT
Jun 9, 2011
I have Ubuntu 11.04 64 bit installed on a Dell Laptop, and my printer, a Samsung Laser ML - 1740 was working fine until yesterday when an upgrade for CUPS appeared in the Update Manager and I installed it. Now when I try to print, the printer is not listed and when I open up "Printing" a message appears stating "Printing service is not available. Start the service on this computer or connect to another server." The 'Start Service' option is grayed out and when I try 'Connect' another box appears "Connect to CUPS server - CUPS server: localhost" is the only option available. I try Connect but an error message appears stating "CUPS server error There was an error during the CUPS operation: 'failed to connect to server' " . I also installed VirtualBox yesterday but I'm not sure if that has anything to do with itForgot to add that the printer is connected directly to the laptop.
View 2 Replies
View Related
Sep 22, 2015
I have just upgraded to Jessie and everything seems to be OK apart from printing from a windows machine to my print share. This was working previously under wheezy. I can print a test page from Cups without any problems, but when I try and print from windows, Samba seems to crash completely and is constantly writing these messages to the logs. Then I lose access to the other shares, presumably while it repeatedly crashes.
STATUS=daemon 'smbd' finished starting up and ready to serve connectionsPANIC: assert failed at ../source3/printing/printing.c(486): pjob->jobid == jobid
[2015/09/22 12:02:03.989596, 0] ../source3/lib/util.c:785(smb_panic_s3)
PANIC (pid 3704): assert failed: pjob->jobid == jobid
[2015/09/22 12:02:03.991930, 0] ../source3/lib/util.c:896(log_stack_trace)
BACKTRACE: 27 stack frames:
[Code] ....
View 0 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
Feb 12, 2011
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
View 1 Replies
View Related
Aug 26, 2010
I recently installed 10.04 and the printer was working for a while. Now when I print something the print que icon shows up and goes out like it has printed but nothing prints. I ran the troubleshooter and got this.
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dest': <cups.Dest HP-Deskjet (default)>,
[Code].....
View 1 Replies
View Related
Apr 29, 2011
I use a Dual core desktop PC with Ubuntu 10.10. A hp-laser- jet 4250 printer is connected to it. I am getting able to print all files except .ps and .eps files. When I send a .ps or .eps file for printing, no job is actually reaching to printer.
View 3 Replies
View Related
Jun 1, 2010
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies
View Related
Sep 18, 2009
I just installed Fedora 11 KDE. Everything went pretty good. But...my printer HP OfficeJet 5780 does not print. According to the applet says its stopped. After some tinkering it says something as: "Not having permission".
View 2 Replies
View Related
May 24, 2010
Since upgrading to Lucid on two different PCs - one clean install and one upgrade I am experiencing a strange problem when printing from Firefox.Every printout from Firefox has a very pale yellow background on the whole print area.If I print to a pdf file rather than directly to the printer, then print the pdf file the problem does not occur.If I print to a postscript file, then print that the problem is present.No other applications I have tested have this problem (open office, gedit, google chrome)The printer is an HP Business Jet 2200 and I have tried all four offered drivers.
View 2 Replies
View Related
Apr 16, 2010
I am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies
View Related
Mar 29, 2010
I'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
View 1 Replies
View Related
May 16, 2010
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies
View Related
Jan 18, 2010
I am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
View 3 Replies
View Related
May 9, 2010
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
View 3 Replies
View Related
Oct 13, 2010
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
View 2 Replies
View Related
Nov 14, 2010
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies
View Related
Mar 14, 2011
I'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
View 3 Replies
View Related
May 26, 2010
I'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?
View 7 Replies
View Related
Dec 4, 2010
I would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies
View Related
Jan 27, 2010
I tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies
View Related
Jun 27, 2011
Trying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
View 8 Replies
View Related
Mar 30, 2010
I'm now using Ubuntu 9.04 and I think of upgrading it to version 10.04 (when it shall be "stable").I'd like to know if I am supposed to modify /etc/apt/sources.list with the name of the new version even though I upgrade by "update-manager-core" with the command sudo do-release-upgrade
View 1 Replies
View Related
May 29, 2010
I can't upgrade. I get: Quote: Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'skype-common' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
This is most likely a transient problem, please try again later. I tried again several times in different days and it is the same. I have 10.4 recently updated from my original installation of 9.10. I think it was not a pre-release, I did it automatically from the website and it took a long time. As far as I know, all I have installed is official, except perhaps Skype itself.
View 7 Replies
View Related
Mar 23, 2010
I was trying to update from 9.04 to 9.10.
During the installation, I kept getting tons of errors. Finally something came up saying that I had to abort the installation and it did some stuff. I tried running an application, but I got an error. So I restarted the system.
The normal screen came up where I had to choose the Ubuntu stuff (I'm new to Ubuntu) in the box. I noticed that it had gone to 8.10... which I had earlier before installing 9.04, which went great. So I chose the first on and the system failed to start. I rebooted and tried all the other options, but they all had errors. Now I'm booted to Windows.
I installed Ubuntu from a CD I created. But it is now outdated because it is 8.10, and I have already upgraded to 9.04. 9.04 to 9.10 is where stuff went wrong.
View 1 Replies
View Related
Oct 9, 2010
When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.
View 4 Replies
View Related
Jul 10, 2010
I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies
View Related
Aug 6, 2009
I try to install one program called "iprint" but it tell me that I missed on package named "cup-libs-32bit" and after I search for that file, I found out it 's not fedora package but it is opensuse package. I wonder what the package is the same package with cup-libs-32bit for fedora. this is how it show after I try to install
[ESPADA@localhost iprint]$ rpm -Uvh novell-iprint-xclient.x86_64.rpm error: Failed dependencies: cups-libs-32bit is needed by novell-iprint-xclient-sl-6.500.20081007-1.x86_64
View 9 Replies
View Related
May 29, 2009
I've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
View 3 Replies
View Related