Ubuntu Installation :: Natty Upgrade Makes A Hash Of 4 Desktop Shortcuts?
May 10, 2011
For years I've had ctrl + alt + 1-4 (keypad) as shortcuts to desktop 1-4. It's worked flawlessly under everything from Slackware, through Debian and even the gnarled mess that Ubuntu is becoming.But now, ctl + alt + 1 dumps whatever window is active on my desktop to the bottom left corner of that desktop. Ctrl + alt + 3 dumps it to the bottom right corner;A7 goes top left and you can guess the rest.
View 2 Replies
ADVERTISEMENT
May 22, 2011
I keep getting a very frustrating error after reinstalling 11.04 on a 64-bit server:
Code:
W: Failed to fetch gzip:/var/lib/apt/lists/partial/us.archive.ubuntu.com_ubuntu_dists_natty_universe_source_Sources Hash Sum mismatch
which follow
Code:
bzip2: Data integrity error when decompressing.
[Code]...
I originally installed 11.04 on this system with the same disk so I'm confused as to what is happening. I have tried using different CD's and even installed of a USB. The memory test of the installer came back okay. The box has two PCI NICs that are recognized and functioning. The only package I have installed is openssh as this is a headless box. What makes this even more odd is that I have a newly installed 32-bit 11.04 server with the same procedure on the same network and it does just fine.
I hope I have been thorough enough in my search and investigation that someone can point me in the right direction. After reinstalling 3 times I am at a loss and I know 11.04 can run on my box without problem (as it did before the reinstall).Tonight I'm going to reinstall with the built in interface unplugged and the two NICs removed, I'm hoping this will prevent apt from bricking itself during the install, which is the only think left I can think of. I suspect the issue has to do with the nic despite it appearing to function properly I am unable to uncompress the archives in question on, my workstation, when they are downloaded on the sever but can successfully uncompress the same files when downloaded on the workstation.
SOLUTION: I pulled both NIC's and enabled the integrated interface and it is all working. I wonder why they didn't work though...
View 2 Replies
View Related
May 22, 2011
I'm was running 64bit maverick on an intel i3 clarkdale desktop; pretty much vanilla with the compiz spinning cube desktop displaying on my 720p HDMI telly. On 'upgrading' to natty my pc refused to display anything on the telly but can still be connected to via ssh. Assuming unity was the culprit I installed gnome and deleted unity; after plugging in a VGA monitor I finallly got an output onto a display device, then managed to configure the HDMI telly as a secondary display. Gnome is just a backdrop with no panels at all; I managed to get panels by ctrl-alt-T and typing 'gnome-panel &'; but this was only a temporary fix. If I try to run a terminal now it locks X and I can only restart via the ssh session.
Currently all I have if I boot is the gnome backdrop. The pc auto logs on (as it did under maverick) so alternate logon screens can't be accessed as pretty much all I can do is run stuff via an ssh shell on my other pc.
What I'd like to do is have my desktop how it was before natty trashed it. Preferably without unity or its very irritating scroll bar widgets.
View 8 Replies
View Related
Aug 5, 2011
I installed the upgrade today and it gets to the login screen fine, lets me login ans then when the desktop loads it just has "flashes", when i click the menu mar (which cant be seen properly it flashes up then disappears. was working perfect as my backup server before this. Any ideas? i can't even cet a command prompt up!
View 4 Replies
View Related
May 8, 2011
Since I upgraded to Natty, XBMC produces a crash log when I exit.I have searched for forum entries but not found any. I use a Gigabyte GA-880GMA-UD2H DDR3 AM3 board with a Athlon II X2 processor, with on-board graphics, HDMI output.
(XBMC seems to work while running, however)
Quote:
cat xbmc_crashlog-20110508_110818.log
############## XBMC CRASH LOG ###############
################ SYSTEM INFO ################
Date: s�n 8 maj 2011 11.08.18 CEST
[code]....
View 1 Replies
View Related
Apr 30, 2010
I just upgraded to 10.04, all went well, except now the "s" and "m" keys on my keyboard open the login menu and the "Me" menu (with the mail and chat options) respectively. Obviously this is very irritating, I can only type those letters by holding down alt. I can't think of how this happened, it didn't do it before the upgrade. I'm using an Apple aluminum keyboard with a Dell. When I run xev and type the s or m key, I get this:
[Code]....
There are no relevant shortcuts under keyboard shortcuts. I am using a xmodmap file that looks like this:
clear mod1
clear mod4
keycode 133 = Alt_L
keycode 134 = Alt_R
keycode 64 = Meta_L
keycode 108 = Meta_R
[Code]....
View 9 Replies
View Related
May 12, 2011
This morning the keyboard shortcuts don't work ant longer; they worked yesterday. alt-tab doesn't switch among windows, alt-ctrl-t doesn't open the terminal etc. On the other hand, all usual shortcuts are OK in keyboard Shortcuts applet. It looks (to my poor intuition) there is something wrong with my usb keyboard recognition....
View 1 Replies
View Related
May 10, 2011
I've just noticed this morning that the number shortcuts that normally appear when holding the super key to show the Unity launcher are not there. The s, a and f shortcuts remain however. Also, just pushing the numbers that should be there doesn't do anything.
I've just upgraded from Maverick to Natty and things were mostly working fine until this. I'm not sure what changes have happened between now and then and I don't remember any major changes in that period.
I just tried to take a screenshot and opened GIMP to save it and I checked again and they have reappeared. So, I guess the new question is why did this happen? How can I solve this problem if it happens in the future? Should I mark this as solved? I don't really understand what happened either way.
View 5 Replies
View Related
Apr 5, 2011
When i upgraded the whole process went all right then when I logged in, i mostly saw black and no unity bar could barley get around.
View 2 Replies
View Related
May 4, 2011
When I try to upgrade from 10.04 to 11.04 I always get this error:
Code: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
If I run sudo apt-get dist-upgrade, I get:
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando rbol de dependencias
[Code]...
Apparently there's nothing wrong in apt.log, but i cannot upgrade and i don't know how to fix it. Any clue?
View 2 Replies
View Related
May 4, 2011
I have successfully upgraded from 10.10 to 11.04, computer was rebooted and I got working Ubuntu Natty. I did not altered any settings and switched computer off. When I tried to boot computer today I got Ubuntu load screen, but OS does not load properly (only load screent, startup sound and that's all).I am able to load terminal as root. How can I troubleshot my problem?
View 1 Replies
View Related
May 9, 2011
I tried to upgrade to 11.04 from 10.10 but I get this error every time.
View 4 Replies
View Related
May 17, 2011
I've just upgraded my Mythbuntu box to Natty. Now I have a completely unusable system due to Xorg taking 70% of CPU. Mouse movement is possible and I can just type but that is about it. Using MythTv is impossible.I'm running a standard mythtv build with the xfce desktop how to fix this one as it has rendered my PVR system impotent.
View 4 Replies
View Related
Jul 19, 2011
Trying to install openFOAM on natty desktop seems to be a problem adding openFOAM to the repo and later some compilation error
View 1 Replies
View Related
Feb 1, 2011
I browsed on internet to find how to upgrade to 11.04 and find the answer.Press Alt+F2 and enter the command update-manager -dAfter authentication, the manager showed the updates and at some point of time, I got the following error.
----
E: Encountered a section with no Package: header
E: Problem with MergeList
[code].....
View 1 Replies
View Related
Apr 29, 2011
I just upgraded to Natty and some images display shifted colors, e.g. bright purple instead of yellow and bright green instead of whatever there used to be. Some images also show properly. I attached a screenshot of a bit of Thunderbird where the bug is visible. Does anyone have any idea what is wrong, or how to diagnose the problem properly? EDIT: and, to make this even more interesting, the attachment I made to the forum displays even more ridiculously once it has been attached - I'm attaching a screenshot of that, too. (although right now I have no idea what it looks like on a working machine)
EDIT2: To reiterate the problem: apparently, Firefox and Thunderbird rotate colors in indexed images for some reason. I am trying to find a way to fix this, with no luck so far.
View 6 Replies
View Related
Apr 30, 2011
After upgrading my laptop from 10.10 to 11.04 I can no longer connect to my home wi-fi. It was working flawlessly for months before the upgrade. The network manager just keeps spinning and nothing happens.dmesg output just keeps showing this over & over again:
[ 1721.748149] ipw2200 0000:03:03.0: PCI INT A disabled
[ 1721.820199] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1721.820204] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[code]....
View 4 Replies
View Related
May 4, 2011
I upgraded to Natty yesterday and my system boots into it ok but I don't get a grub menu (and so no other options like recovery mode which I really need right now). I tried purging grub and re-installing it on /dev/sda but still no joy. Here's the info from the Boot Info Script. I've also tried uncommenting GRUB_GFXMODE=640x480 in /etc/default/grub but that doesn't help. How I can get the menu back?
Code:
Boot Info Script 0.56 from 8 February 2011
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb .....
Devices which don't seem to have a corresponding hard drive: sdc
StdErr Messages:
unlzma: Decoder error
unlzma: Decoder error
View 4 Replies
View Related
May 5, 2011
I've had this problem on a couple of Ubuntu server upgrades and am keen to get to the bottom of it. Basically, with an Ubuntu 10.10 server installtion where LVM has been used, running through the do-release-upgrade process works perfectly until the reboot stage. Then grub complains with "no such disk" and dumps me out to the grub shell. From here, I can see (from ls) the following:
Code:
(hostname-swap_1) (hostname-root) (hd0) (hd0,5) (hd0,1) (fd0)
I can enumerate the filesystem on (hd0,1) which seems to contain the /boot filesystem and the filesystem on (hostname-root) seems to contain the / filesystem.
If I execute:
Code:
linux=(hd0,1)/vmlinuz-image-2.6.38-8-server root=(hostname-root)
initrd=(hd0,1)/initrd.img-2.6.38-8-server
boot
It boots, but into busybox saying that the target filesystem doesn't have requested /sbin/init.
View 1 Replies
View Related
May 11, 2011
When I upgraded my 64bit System76 machine to Natty, I received an error message that initramfs-tools had failed to be upgraded properly. Nonetheless, when I restarted everything seemed to work as it was supposed to.However, every time I do an update the problem with initramfs-tools recurs. I get the following error message:
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic
Syntax error at or above line 20 in file '/etc/lilo.conf'
[code].....
View 5 Replies
View Related
Jun 27, 2011
Successfully upgraded to 11.04 over the weekend, and all seems to be working well. The only issue I've got is with the grub menu. I used to be able to run:
sudo gedit /etc/default/grub
followed by:
sudo update-grub
after kernel updates, in order to change the default OS to boot (I've been dual-booting Ubuntu and xp for several years now).
View 2 Replies
View Related
Jun 13, 2011
Trying to install ubuntu 11.04 drove me nuts until I found this page .
My system is an ASUS moderboard with an AMD chipset. The solution came when I entered the BIOS and disabled the cool&quiet feature for the chipset.
After installation, I have to keep cool&quiet disabled in order to run ubuntu. Re-enabling cool&quiet results in ramdon restarts or freezing
View 5 Replies
View Related
Apr 11, 2011
My current setup was:
4 x 500 gb hard drives in (software / onboard controller) Raid 10 (1 +0) with Windows 7 x64 as the primary OS
1 500 gb hard drive with Ubuntu 10.10 installed
After upgrading to Ubuntu 11.04 Beta, I hit the Grub Error. I have removed the 5th HDD but still getting it on boot into Windows 7. I am currently in the process of copying all files from my raid via a 10.10 flash drive boot (fortunately was able to mount my raid's partitions).
View 3 Replies
View Related
Apr 15, 2011
X is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
View 1 Replies
View Related
Apr 28, 2011
If I just upgrade my 10.10 to 11.04, will it replace gnome with unity? I tried unity before and it is not satifying because it is not customizable, I feel I have less options and less power over what my interface looks like and how it behaves. Same case with gnome3.I'm wondering if when I upgrade to Naughty will I have to go through a lot of messing around with packages and configuration files to get back to gnome2 ? Do we have an option when we upgrade to choose between Unity, Gnome2 and Gnome3?
View 5 Replies
View Related
Apr 29, 2011
So before natty, firefox 4 interface fonts matched the rest of my apps, but now they are huge! See the screen-shot to see what I mean. Anyone know how to get them to match again?
I think some of the browser fonts changed as well, but I know I can change them in the options menu.
View 1 Replies
View Related
May 1, 2011
I was running Ubuntu 10.4 netbook version (with Gnome) on my Dell Inspiron 910 and yesterday it told me there was an upgrade available, to Natty. I followed the links, did the download, and left it to install overnight. When I got up today, it said it had a problem, because an application was using a file it needed. I thought I had closed everything before I started the process. I acknowledged the message, and proceeded to restart.
I ended up with the standard 10.4 Ubuntu screen, but with no tool bars, status bars, or anything. Just the wallpaper. Keyring login came up and I signed in, wireless said it was connected. So it looks like things are working, just no UI as such. Poked all the screen edges with the mouse, but nothing popped out.
Ctrl><Alt><Del> brought up the logout screen, and if I clicked on Help, I could ultimately get Firefox to run. (Note: the Help screen talks about Gnome, but it had the new popout scroll bars).
If I hold down <Shift> on startup, I get the GRUB menu. I am running linux generic 2.6.38-8 , but I am not sure where to go from there. Running dpkg didn't help.
View 4 Replies
View Related
May 4, 2011
After upgrading to Natty, my Alt/Win meta key option is no longer working.
I'm using System Settings -> Keyboard -> Layouts -> Options -> Alt/Win key behavior and selecting "Meta is mapped to Win keys".
However the Win key still just pops up the files-and-folders window, and meta is not there.
This worked fine in 10.10. Need this with Emacs...
View 4 Replies
View Related
May 7, 2011
I upgraded to natty on release day and everything went fine, but about three days ago when I went to update my sources, I get this:
Code:
sudo apt-get update
Code:
W: Failed to fetch [URL] Sources 404 Not Found
W: Failed to fetch [URL] Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
I've looked through the forums, but similar problems are always tied to the mozilla repo, not this one. It seems important, so I'm not sure if I should just delete it or what. My sources.list looks like this:
Code:
# deb cdrom:[Ubuntu 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted
# See [URL] for how to upgrade to newer versions of the distribution.
deb [URL] natty main restricted
deb-src [URL] natty main restricted
## Major bug fix updates produced after the final release of the distribution .....
View 9 Replies
View Related
May 10, 2011
I was going to pull the trigger and do the "natty" upgrade. Before I do I had a few questions. Basically, I changed a few config settings on my ubuntu 10.10 load. I made it so I can connect to it remotely via ssh and open a secure desktop session. I changed some port settings so it doesn't use the traditional ssh 22 port and traditional xrdp port was change also. So, I'm wondering if my "tweaks" will remain intact after the update or if I'll have to go back in and reconfigure those settings? I'm running 10.10 on my PIII 600 with an old ATI Radeon 64 graphics card. I'm quite happy with 10.10 but if I can upgrade to "natty" will little problems I'd like to. Also, my default GUI is xfce. Also, here's my system as shown by lspci:
[Code]....
View 2 Replies
View Related
