Ubuntu Installation :: Mythbuntu 10.10, MythTv, Libvdpau And Nvidia?
Dec 1, 2010
Allrigt, I am a noob, so take it easy with me I installed mythbuntu 10.10 a couple of days ago. I had problem with my Nvidia card (as everyone else it seems). I have a Geforce3 Ti500 GPU card (and I am running on a 32-bit version). First I had to enable all the (almost all) flags in the installation gui by pressing F6 (other options) (using live CD).
Then when the installation was made, it all froze at the startup. I managed to get a prompt by holding ESC at startup (I never got it to work with CTRL+ALT+F1, it was perhaps me or perhaps that won't work before the system is restarted and the installation complete?). Allright, to be able to startup, I downloaded new drivers (well, old ones it seems), NVIDIA-Linux-x86-96.43.19-pkg1.run
[Code]...
View 2 Replies
ADVERTISEMENT
Apr 27, 2010
is there any simple way how to upgrade 0.22+fixes (under Mythbuntu 9.10) to 0.23+fixes? For example any debian package (which I didn't found) to download and simply unpack and install? I'm afraid that if I modify this MythTV, Open Source DVR for 0.23 and use it on 9.10 with 0.22 I'll have problems with directories and so on...
View 1 Replies
View Related
Aug 12, 2010
Am attempting to set a static IP address on a server (to be used with Mythtv) and is running mythbuntu 10.04 (apologies if this is the wrong place to post this). I can set a static IP address that is in the range of 192.168.1.x on other machines on the network but when I try with the server it is not able to connect to the network. When using the DHCP rather than manually assigning the address it is assigned an address with the 10.0.0.x range. Why is it doing this I have never have this problem on other ubuntu boxes (and this one prior to a format of the OS).
The router/gateway is 192.168.1.1 I did have a DHCP server on the mythbox before formatting it and I was able to assign a static 192.168 address and retain internet connectivity. But I have re-enabled the DHCP server on my router since formatting the box.
View 1 Replies
View Related
Jun 30, 2010
Had mythbuntu/xbmc running for 4 months with vdpau and all the same hardware. I killed it with an update and thought it'd all be easier To build it the 2nd time -- wrong! Fresh install of mythbuntu lucid off cd, Asus p5g43t-m pro, nvidia gforce 9500 gt
What I tried so far...Different drivers with the hardware app thingee. Multiple times -- Purge nvidia, purge nouveau, blacklist list of other video stuff with extra line after, stop gnome, manual install various drivers - 195.xxxxx or Synaptic install various drivers. Tried updates, adding avenard and daily build repos. Everything in combinations. Outcome remains consistant. Lo res error start, can't load nvidia driver, selected but not in use, xorg.conf needs editing.
I'm getting the same error messages as the common nvidia help posts describe but the solutions aren't working for me.
4 days of this, 3 installs plus a shot at Mint, and no progress. I'm pretty frustrated. I'd consider returning to karmic if I didn't think the updates would pork the nvidia driver all over again.
Last install of 9.10 there was a required edit of vmalloc=256M and a shut off of cx18. That's been fixed in lucid? What else ccould it be?
View 3 Replies
View Related
Jan 11, 2011
Have anyone tried enabling libvdpau, libva (vaapi) and MPlayer with the proprietary Nvidia driver? Does it actually work on slackware stable/current? (Lower cpu utilization during HD decoding) Is this the correct installation workflow?
- libvdpau SBo
- libva SBo
- Nvidia driver SBo/proprietary
- vdpau-video SBo
- ffmpeg/MPlayer from SBo/slackware/alien
View 3 Replies
View Related
Feb 5, 2010
I'm trying to format/partition my second HDD with xfs using gparted, most of the file system type options are greyed out any idea why? How to resolve?
View 7 Replies
View Related
Dec 28, 2010
How do I install mythbuntu on top of ubuntu 10.10
View 1 Replies
View Related
Jan 26, 2011
I posted this the other day. Just thought that made it would get more attention here. http://newyork.ubuntuforums.org/show....php?t=1672472Quote:I have been running a mythbuntu 8.1 for almost 2 years now. I finilly decided to do a distr.-upgrade. I used the distr.-upgrade tool in X to install the upgrade. On reboot everything was working fine. I then did an update and a reboot. Now I get nothing that I can read. no bios splash, no grub, no x login, just horizotil black lines that keep flashing on screen. I tryed to hit control-alt-f2 and nothing changes. I hit the numlock and the numlock light does not come on. It seems like the system is not even running.
Now the kicker. If I telnet into the machine it is running. I can access mythweb from another computer. It is still recoding and trascoding. It is running. But I can't just into login to it locally.I setup up gdm to autologin but it does not start x. I have a vnc server that is not acsessable.Motherboard asus m2n-xAMD athlon x2 38001gb ram1tb driveati video card2 pvr-1501 pvr-500
View 1 Replies
View Related
Dec 9, 2010
I would like to convert my windows PC to Mythbuntu.
I would like assistance with this and would be willing to hire someone to do it for me. How do I find someone to do this?
View 1 Replies
View Related
Feb 26, 2011
Total noob here. I am trying to install Mythbuntu 10.10 on a computer with and empty hard drive using a CD.The install start fine, I make a couple of selections to tell the installer I want to use the entire harddrive, select the timezone and the install starts without any problems. Unfortunatly after about 30min or so, the installation seem to be stalled out with the progress bar at the 85-90% range. There are no obvious errors in the log.
I have successing installed Ubuntu in the past (although not on this hardware). The PC includes an IDE based DVD-R, 120Gb sata based ssd, 939 dual core processor. 8600GT video card. 2Gb memory. One possibility is that I don't have a TV tuner card installed yet. Was going to do that after I got Ubuntu up and running but perhaps the installer is looking for a tuner card. I realize I am not giving anyone much to work but I am not sure what I could post.
View 2 Replies
View Related
Feb 23, 2010
I am trying to create a dual boot setup with Windows XP. Everything goes smoothly untill the final reboot. I get a text screen giving me the two options of booting into Windows XP or Mythbuntu. When I select Mythbuntu I get a second text screen with a rectangle only showing Windows XP as an option -nothing else. Hitting enter causes error message.
If I selext the Windows XP option on the first screen system boots into windows without a problem.
I suspect this should be fairly easy to fix - but being a complete noob to Linux I am lost as to what to do to correct this.
View 1 Replies
View Related
Aug 29, 2010
Not sure when this first happened but I suspect it was just a couple of days ago. I had installed DeVeDe to burn some video to disc and it all worked fine but now when I try to run DeVeDe it says it can't find mplayer and you have to quit. I've tracked this back to mplayer and I'm getting this error from mplayer:
mplayer: error while loading shared libraries: libvdpau.so.1: cannot open shared object file: No such file or directory libvdpau is installed so I don't know why it can't find the library.
I see there are issues with vdpau and nvidia but this shouldn't be affecting me should it??
View 6 Replies
View Related
Mar 14, 2010
How to fix so that normal user account can run mythfilldatabase and not have to be root?
View 1 Replies
View Related
May 6, 2010
point me to a fool-proof procedure to get my Hauppauge USB device working. The MythTV website talks about pre-compiled files of which I have no understanding whatsoever!
View 1 Replies
View Related
Jun 11, 2010
I'm slowly figuring out Mythbuntu. How cool it is! I continue to have this problem...Some channels have trouble locking initially. Some even hang while viewing. Using exactly the same antenna and cabling, my Samsung DTB-H260F has no such issue. All channels are rock solid. Is there some setting not correct in MythTV? Do I need to invest in a better tuner?
View 2 Replies
View Related
Aug 4, 2010
I have Mythbuntu 10.04 installed on an exclusive HTPC and working great... until tonight. After letting the system update some packages (161 packages if I remember right), I suddenly have an issue where the graphical system won't start. After researching I found three error messages that might be causing that.
1. At the start of splash screen I see "UUID=xxxxxxxCD7 not ready yet or not present" I checked in /etc/fstab and found that this is the swap partition. I don't remember seeing this before so this could be the culprit.
2. I'm not at the computer in question right now but I saw a Plymouth error about "mountall" and then the message "plymouth command failed". Not sure if this could be the main error.
3. after a while (usually ca. 1-2 min) I receive thousands of errors of the kind "out of memory"... "kill process XXXX" (process vary wildly e.g. dbus-daemon, mysql, etc)... "process killed"..."respawning"
After error 3, I'm not able to switch to graphical console (ctrl-alt-F7). If I was in the graphical console at this moment, I simply can't switch to the CLI console. I'm always afraid of updating my system since I've seen lots of things breaking afterwards (usually the proprietary graphic drivers) but this is really strange.
View 1 Replies
View Related
Dec 23, 2010
I have an ECS gf7100pvt-m3 that has the Nvidia MCP73 chipset that supports HDMI out. Unfortunately the MB only has a DVI connector which from what I have read is supposed to cross wire the audio to the correct pins on the HDMI (have a ticket in with ECS to see if like ATI there is a special adapter).
I have tried every thing but only Analog audio is working.
I've tried listed on these links to no avail:
[url]
[url]
[url]
[url]
The only error is the at the Aumix isn't touching....I can select HDMI or IEC958 1 etc etc and the audio mixer shows full blue as if it should be working but I can't get VLC or MythTV to output sound.
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
May 24, 2010
I have installed mythbuntu 10.04 and installed my tv tuner (saa7130). I can play games on composite but cannot scan for tv cannels. how i can scan for channels because he cannot find a single channel (I think this is weird) ?
View 2 Replies
View Related
Sep 18, 2010
Installed Mythbuntu today. Spend hour over hour trying to get MythTVto work together with my Hauppauge WinTv-NOVA-HD-S2 card. I've followd so many wikis, reinstalled, tried again ... no success. The card itself works fine. I can use it with MeTV or on Mplayer - no problem. I managed to create a channels.conf. Also no problem. MythTV recognizes the correct card. I have set it to LNB. Now in the backend setup I cannot manage to get the card to scan. And if I try to point it to the channels.conf I am also getting an error message (Failed to open '%1'.
View 2 Replies
View Related
May 2, 2011
The internet has been working happily on my Mythbuntu machine for many months but stopped working overnight.If I try to do "sudo start networking" I get a "Job failed to start" message.There's also a solid orange light on the ethernet socket.As it's been working for months, I don't think my interfaces config needs updating.Looking at what's been updated recently on the system:
1) I've configured the machine to wake from USB. It was working for a couple of days so I don't believe this is the issue.
2) I set up wake-on-lan with ethtool. Again, this was working (although it did seem to disable wake-on-usb and required a reboot to fix)
3) Update to 11.04 - I said no to this, as 10.10 was working very nicely indeed.
I've disabled wake on lan and rebooted. No joy.
ethtool detects the ethernet controller ok and it's listed in lshw.
View 1 Replies
View Related
Jan 24, 2011
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies
View Related
Jan 2, 2010
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
View 4 Replies
View Related
Jan 13, 2010
I can install Boxee beta on my mythbuntu 9.04 installation, but when I try to run it, I get the following errors:
/opt/boxee$ ./run-boxee-desktop
/opt/boxee/Boxee: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by /opt/boxee/Boxee)
./run-boxee-desktop: 38: /opt/boxee/give_me_my_mouse_back: not found
I get the same error if I run as root. For now, I don't care so much about the second error, but if anybody has some advice about how to resolve the first error (GLIBCXX...), I've used Linux for years (usually gentoo. I would be surprised if the version of Boxee compiled for Ubuntu 9.04 depended on an installed library without the proper compiler version.
Note that I am using *mythbuntu*, not ubuntu itself, so this may be part of the problem, but it would also surprise me... I'm happy to just install the correct library, but where is it?? I assume I should get it from Ubuntu, or I will break something.
I've also posted to the boxee support forum, but not heard back yet (they are probably busy!)...
Also, I've got Boxee alpha running in a 32 bit chroot environment (on my 64 bit machine), so at least *some* version of Boxee runs, but I wonder if there is some conflict between the two versions.
View 5 Replies
View Related
Feb 4, 2010
Does th Pinnacle 300i PCTV works under ubuntu (and mythbuntu)?
View 7 Replies
View Related
Feb 13, 2010
I'm trying to get my screen resolution set in Mythbuntu 9.10, but there is no xorg.conf on my system! I'm trying to figure out what to do (the xfce tool on mythbuntu doesn't offer the correct resolution, and I'm not even sure what driver I'm using). I've seen other threads saying to run nvidia-setup or somesuch. I assume the appropriate tool in my case would be aticonfig (I saw that elsewhere too) as I'm using an ATI Radeon 9600XT, but that tool says:
Code:
aticonfig: No supported adapters detected
View 4 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Jul 23, 2011
What is the minimum price I can expect to spend to build a Mythbuntu computer from scratch, and are there any good guides out there explaining how to do it?
View 1 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Feb 11, 2011
After overcomming a lot of difficulties, my MythTV (Via Epia 10000EG with Hauppauge PVR 500 card) worked with Mythbuntu 9.04. Last year it crashed and I had no time to spare to rebuild it.
Last couple of weeks I had more time and downloaded and tried to install Mythbuntu 10.10. Everything seems to be installed ok, but I get no picture in MythTV when I select "Watch TV" and no picture when I try to record something. When watching TV, the message "Please wait" appears for appr. 5 secs and then the system returns to the menu.
I installed Mythbuntu 10.10 and am using the provided IVTV drivers.
Dmesg and lspci give no errors, every seems to be in order, IVTV drivers are loaded, initialized and errorfree. Cat /dev/video0 gives me static in MPLAYER. The MythTV backendlog doesn't even give a message, the frontend log just says there is no picture...
There seems to be an error between the back and frontend. I checked the settings in capturecards, TV sources, channel edits, etc,etc, but I can't find it.
View 7 Replies
View Related
