Ubuntu Multimedia :: Missing Library For Boxee Beta On Mythbuntu 9.04

Jan 13, 2010

I can install Boxee beta on my mythbuntu 9.04 installation, but when I try to run it, I get the following errors:

/opt/boxee$ ./run-boxee-desktop
/opt/boxee/Boxee: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by /opt/boxee/Boxee)
./run-boxee-desktop: 38: /opt/boxee/give_me_my_mouse_back: not found

I get the same error if I run as root. For now, I don't care so much about the second error, but if anybody has some advice about how to resolve the first error (GLIBCXX...), I've used Linux for years (usually gentoo. I would be surprised if the version of Boxee compiled for Ubuntu 9.04 depended on an installed library without the proper compiler version.

Note that I am using *mythbuntu*, not ubuntu itself, so this may be part of the problem, but it would also surprise me... I'm happy to just install the correct library, but where is it?? I assume I should get it from Ubuntu, or I will break something.

I've also posted to the boxee support forum, but not heard back yet (they are probably busy!)...

Also, I've got Boxee alpha running in a 32 bit chroot environment (on my 64 bit machine), so at least *some* version of Boxee runs, but I wonder if there is some conflict between the two versions.

View 5 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Boxee Beta 64bit - Sleeping Process?

May 15, 2010

I've got the new beta working in ubuntu 64 bit lucid 10.4. But, I have to go to admin/sys monitor and end the boxee "sleeping" process B4 it will start again after exiting The app? Id sure like to fix it.

View 4 Replies View Related

OpenSUSE :: Install Boxee / Error: Could Not Find A Required Library

Feb 10, 2011

I am trying desperatly to install boxee onto my pc Boxee - Watch Movies, TV Shows and clips from the Internet on your TV.without success.I have downloaded the source code from the site and have ran

./bootstrap
./configure

The ./configure last few lines =
checking for boost/shared_ptr.hpp... yes
checking for main in -lGL... no
configure: error: Could not find a required library. Please see the README for your platform.

I'm not sure what this lGL is referring to. The readme states that I need the below to run the configure, though that doesn't say lGL either?

Build-Depends: debhelper (>= 7.0.50), quilt, python-support, cmake,
autotools-dev, autoconf, automake, unzip, libboost-dev,
libgl1-mesa-dev | libgl-dev, libglu-dev, libglew-dev, libmad0-dev, libjpeg-dev,
libsamplerate-dev, libogg-dev, libvorbis-dev, libfreetype6-dev,
libfontconfig-dev, libbz2-dev, libfribidi-dev, libsqlite3-dev,
code....

View 1 Replies View Related

Software :: ./configure Problem For Libsf Library Due To Apparently Missing Libdb Library ?

Aug 4, 2011

./configure script fails to configure libsf. Please check the following last few lines of configure script error.

But find command shows the following;

It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.

View 6 Replies View Related

OpenSUSE Multimedia :: Limited Internet Connectivity - Errors Due To Library Missing While Running Configure Script

Oct 30, 2010

I am using opensuse 11.3 on a computer with limited internet connectivity.Can anyone provide a list of essential libraries which would be enough for most applications. I get errors due to library missing while running configure script.

View 1 Replies View Related

Ubuntu Multimedia :: Boxee Can't Connect To Internet

Jan 2, 2011

Ive installed the latest boxee from their website and i cant login or do anything with it cuz when i try to login it says Boxee is in offline mode so i cant login and whenever it does try and login it says its not connected to the internet.

View 2 Replies View Related

Ubuntu Multimedia :: Boxee - Ability To Add A Netflix App ?

Mar 15, 2011

I just installed Boxee on my freshly built Mythbuntu machine. Being my first experience with an HTPC media center, I am impressed.

That being said, I began to link Netflix, MLB, and other accounts. I was looking for the ability to add a Netflix app, but have yet to find it. I attempted to use the Boxee browser to navigate to Netflix, which I did, but the mouse cursor would not select anything.

View 2 Replies View Related

Ubuntu Multimedia :: HDMI Or DVI Mythbuntu 10.10

Dec 23, 2010

I have an ECS gf7100pvt-m3 that has the Nvidia MCP73 chipset that supports HDMI out. Unfortunately the MB only has a DVI connector which from what I have read is supposed to cross wire the audio to the correct pins on the HDMI (have a ticket in with ECS to see if like ATI there is a special adapter).

I have tried every thing but only Analog audio is working.

I've tried listed on these links to no avail:

[url]
[url]
[url]
[url]

The only error is the at the Aumix isn't touching....I can select HDMI or IEC958 1 etc etc and the audio mixer shows full blue as if it should be working but I can't get VLC or MythTV to output sound.

View 9 Replies View Related

Ubuntu Multimedia :: Set Up With Boxee And MythTV As Media Center

Feb 12, 2010

I'm trying to set up Ubuntu with Boxee and MythTV as a media centre. I'm currently stuck at displaying a picture on my TV screen. I only have an Intel onboard graphics chip, and so I bought a VGA-to-TV box to convert the signal. This is USB powered and has VGA in, S-Video, Component and VGA out. I have it connected to an external monitor by VGA and to the TV by component cable into a SCART adapter (along with a mini-jack to phono cable from the sound card).

I was hoping that the box would handle the settings for the TV screen, but all I'm seeing are flashing lines of colour, so I'm guessing I have to change the settings. Eventually, I want to get the TV to be widescreen, but I'd like it to work first! I have created an xorg.conf file and put in three extra modes.

- first, an 800x600 VGA to PAL TV converter from [URL]... - second and third, two resolutions generated by the calculator, based on the SwitchResX settings for my MacBook to connect to the same TV. Now I'm sure you want to see a whole load of settings from my machine, but sadly I don't know what settings you'll need to see.

View 1 Replies View Related

Ubuntu Multimedia :: Install Boxee As A User Account?

Jan 13, 2011

I am on ubuntu 10.10 and want to install boxee to use as a media player for me and my roomates. My ubuntu account is password protected and I would like to create another user that when you log on (with out a password) it automatically runs boxee, and nothing else.

View 2 Replies View Related

Ubuntu Multimedia :: Mythbuntu Cannot Find Channels

May 24, 2010

I have installed mythbuntu 10.04 and installed my tv tuner (saa7130). I can play games on composite but cannot scan for tv cannels. how i can scan for channels because he cannot find a single channel (I think this is weird) ?

View 2 Replies View Related

Ubuntu Multimedia :: Cannot Get Mythbuntu To Work With Nova-HD-S2

Sep 18, 2010

Installed Mythbuntu today. Spend hour over hour trying to get MythTVto work together with my Hauppauge WinTv-NOVA-HD-S2 card. I've followd so many wikis, reinstalled, tried again ... no success. The card itself works fine. I can use it with MeTV or on Mplayer - no problem. I managed to create a channels.conf. Also no problem. MythTV recognizes the correct card. I have set it to LNB. Now in the backend setup I cannot manage to get the card to scan. And if I try to point it to the channels.conf I am also getting an error message (Failed to open '%1'.

View 2 Replies View Related

Ubuntu Multimedia :: Dual Screen - Run Simultaneously Boxee And GDM At Startup?

Mar 4, 2010

I have a 24inch monitor and a LCD TV both connected to my graphic card, by HDMI for the TV and DVI for the monitor. Here's my problem: I would like GDM and Boxee to start simultaneously when I start my computer, Boxee displayed on my TV and GDM on my monitor. I made some research and I unfortunately did not found anything about starting a graphical software and GDM in parrallel (two separated DISPLAY). I have no particular attachment to GDM so if you think it would be easier to use the classic login prompt or another Display-Manager do not hesitate, The crux is to have an authentification system before accessing to Gnome and an detached Boxee running on my TV.

View 2 Replies View Related

Ubuntu Multimedia :: Boxee Audio Clicking In Video / Stop It To Do So?

Sep 23, 2010

Some (not all) videos I have on my hard drive play video fine but have a loud and fast clicking sound for the audio. I have noticed the problem only on .avi files.

also, I am noticing that the picture on mp4 files is jittery and the video and audio slowly become more and more out of sync

This is happening on my Media Center running Boxee. When I run the same avi file from my PC it is perfect. MP$ files are still out of sync

View 3 Replies View Related

Ubuntu Multimedia :: MythTV Upgrade To 0.23+fixes On Mythbuntu 9.10?

Apr 27, 2010

is there any simple way how to upgrade 0.22+fixes (under Mythbuntu 9.10) to 0.23+fixes? For example any debian package (which I didn't found) to download and simply unpack and install? I'm afraid that if I modify this MythTV, Open Source DVR for 0.23 and use it on 9.10 with 0.22 I'll have problems with directories and so on...

View 1 Replies View Related

Ubuntu Multimedia :: Does Th Pinnacle 300i PCTV Works Under Mythbuntu

Feb 4, 2010

Does th Pinnacle 300i PCTV works under ubuntu (and mythbuntu)?

View 7 Replies View Related

Ubuntu Multimedia :: Get Screen Resolution Set In Mythbuntu 9.10 - No Xorg.conf

Feb 13, 2010

I'm trying to get my screen resolution set in Mythbuntu 9.10, but there is no xorg.conf on my system! I'm trying to figure out what to do (the xfce tool on mythbuntu doesn't offer the correct resolution, and I'm not even sure what driver I'm using). I've seen other threads saying to run nvidia-setup or somesuch. I assume the appropriate tool in my case would be aticonfig (I saw that elsewhere too) as I'm using an ATI Radeon 9600XT, but that tool says:

Code:

aticonfig: No supported adapters detected

View 4 Replies View Related

Ubuntu Multimedia :: Expect To Spend To Build A Mythbuntu Computer From Scratch?

Jul 23, 2011

What is the minimum price I can expect to spend to build a Mythbuntu computer from scratch, and are there any good guides out there explaining how to do it?

View 1 Replies View Related

Ubuntu :: Skype Beta Missing In Synaptic Downloads?

Mar 24, 2011

I went to download skype in synaptic today and found that the Beta is missing. Are we on the verge of another release?

View 5 Replies View Related

Ubuntu :: Missing Library Files While Compiling

Aug 18, 2010

I have tried to compile several programs from source code and have into a similar error in each case. I try make the program and I get an error like: fail program confsdefs.h. Reading further into the log file, I see there is a long list of missing library files when I compile something like Samba 3.5.x:

[Code]...

I have searched for dependency information and used apt-get to add anything I can find. How can I identify and find the dependencies for source? I have checked the source documentation though typically does not list required packages. My other question is how to check the path used to locate the libraries? Given the length of the missing library list, I think the problem may be configuring make.

View 2 Replies View Related

Ubuntu Installation :: Configure Fails But Library Not Missing

Nov 4, 2010

I'm trying to install gazebo but I would like the general solution. When I type "./configure" I get the error: "could not find gdal_priv.h" or sometimes "could not find gdal library" But I have it on my computer. It is: usr/include/gdal/gdal_priv.h This means configure is not looking in the right place for this library. Where is the path stored, please? I tried reading the configure file but I could not find it. I tried to replace all instances of gdal_priv.h by gdal/gdal_priv.h but this did not work either. I tried adding /usr/include/gdal to all the env PATH_something_or_other I could see. how to tell to ./configure where to look for libraries. What file(s) should I edit? (I tried config.status, because it contains /usr/include stuff). The files I have are:

[code]...

View 2 Replies View Related

Debian :: Missing Library For Firefox?

Jul 22, 2010

On one of my computers, I installed Lenny with Gnome and installed Firefox without a hitch. Now, on another computer I installed Lenny minimally, no desktop, just the jwm window manager and dual monitors. After installing Firefox, I have a problem.

When I try to run Firefox, it aborts with an error:

"Error while loading shared libraries: libasound.so.2: cannot open shared object file: no such file or directory. " I tried to install libasound.so.2 with apt-get, but no luck.

View 3 Replies View Related

OpenSUSE :: Missing Library To Run SeaMonkey

Apr 22, 2011

I've just updated my system from SuSE 11.2 to 11.4 (I'm using KDE desktop environment) I like to install SeaMonkey myself. I use the installer from the Mozilla site. When I try to run SeaMonkey, this is what happens:

Code:
./seamonkey-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory
Where do I get the missing library? I've tried searching for it on the rpmpbone site RPM Search and even they couldn't find it.

View 4 Replies View Related

Fedora :: F13 - MPlayer Complains About Missing Library

Aug 18, 2010

When I load a video into mplayer I get this message:
Code:
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
I checked that this lib was installed with yum:
Code:
Package libvdpau-0.4-1.fc13.i686 already installed and latest version

View 3 Replies View Related

Software :: Library Cannot Be Loaded As Symbol Is Missing?

Aug 2, 2010

This is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.

As you might see below. I receive the following error message
Error in dyn.load(file, DLLpath = DLLpath, ...) :
unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library/2.11/RandomFields/libs/RandomFields.so':
/usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string

[Code].....

View 14 Replies View Related

Ubuntu Multimedia :: Boxee Video - When I Open A Video It Opens In A Tiny Box In The Upper Left Hand Corner Of My Monitor?

Feb 7, 2011

Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?

View 6 Replies View Related

Fedora :: F12 DMRAID Jmicron Missing Library And Extra Spaces?

Dec 2, 2009

things "seem" to work, first time I've really ever used dmraid (usually mdraid), but I'm worried about this error

dmraid -ay
RAID set "jmicron_STORAGE2 " was activated

The dynamic shared library "libdmraid-events-jmicron.so" could not be loaded:

libdmraid-events-jmicron.so: cannot open shared object file: No such file or directory

Two things, why no matter what I name the RAID in the jmicron bios is puts a bagillion spaces after it, and second, I cannot find the missing lib anywhere I've installed all the dmraid* packages.

View 3 Replies View Related

Fedora :: Install The Mysqltcl Library - Failing Due To Missing Dependencies

Oct 14, 2010

I'm running FC11 on an Intel 686 server and would like to solicit some help. I'm writing an Expect script to discover our lab network and would like to insert the results into a mySQL database. I've installed Apache/PHP/mySQL via the LAMPP distribution. I've hit a brick wall, however, in trying to install the mysqltcl library. how to install the library. I have downloaded an RPM, but installatiojn is failing due to missing dependencies: libmysqlclient.so.10 and libmysqlclient_r.so.10. And I have no luck in locating and installing those.

View 1 Replies View Related

Software :: Installing Missing Library In / Home Folder Without Root

May 29, 2011

I would like to run Blender (3D modelling software) on RedHat Enterprise. I have a problem with missing libraries (libavutil50.so). Second problem is that I have no root access so I cannot install rpm package with libavutil50.so. Does anybody knows how can I manage this? Is it possible to install somehow libavutil50.so in my /home folder, that Blender will have an access to this library ?

View 1 Replies View Related

Slackware :: Failure Building Multiple Apps Due To Missing Library Jscore?

Jan 26, 2011

I'm having a problem building some applications (e.g. Qsynth and FreeCAD) with sbopkg relating to an unfound library named "jscore". I've been keeping my system up to date with slackware64-current.Google searches have turned up very little about this library. There is a sourceforge page that has no files and seems to be related to a google hosted script jsCore.js... but I don't think that's what's missing here. I've come across some vague references to this jscore library being part of webkit. Can anyone verify this? I updated my webkit library itself and found no apparent results. Perhaps jscore was removed in an update to Qt (both of the example applications mentioned above link to Qt) as it seems to have it's own webkit library, libQtWebKit.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved