I need to update my mac80211, but I don't know how can I do that. In the update manager there's is no update for it, but I know that there is a newest version. At least, at development branch.
View 1 RepliesI am reasonably technical but new to Linux. I almost guarantee there will be simple things that I don't understand. I am trying to get a USB wireless adaptor working with aircrack-ng and have managed to find that I should have the mac80211 drivers installed and active to support the rtl8187L and B chips. (I also need to patch them apparently, but first things first).
I am working with Ubuntu 8.04LT (I am fairly sure) and do not seem at the moment to be able to update to a more recent version on the target machine. The kernel is 2.6.24-27. I followed instructions to blacklist the r8187 and ieee80211 modules, which seemed to go quite smoothly.
I now need to get the mac80211 module loaded, but can't find out how. The information at Aircrack-ng and related sites seems to indicate that I expect the drivers to be already in my build of Ubuntu but they do not seem to be loading. The suggestion seems to be that they will load automatically. I have found some stuff in /lib/modules/2.6.22-14 and /lib/modules/2.6.22-27, and also in /usr/src/linux-headers-2.6.24-27 which is probably relevant but I don't know what if anything to do with it. If anyone needs more detailed information, just tell me what you need to know, and how to get it.
I tried installing the mac80211 framework on ubuntu 10.10 but after i install it and restart my system , none of my network connections work.
i found a solution to that problem which is a very weird solution. because none of the network connections are working . i try to activate the wireless driver from the System->Administration->Additional Drivers. But it fails , but after it fails my wired network connection comes back online. and then i have acccess to the internet . After that i activate the wireless driver again and it works.
This is obviously the worst possible solution ever. So what i don't understand is why the mac80211 framework is causing these problems. after applying my "solution" i thought of checking the modules installed on my system using lsmod and i see mac80211 there. i don't understand why it is still there after i executed the "sudo make uninstall" command . code...
I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.
I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.
having had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
Update Manager is inviting me to update from my Maverick Meerkat to Natty. Is this a good idea?
View 7 Replies View RelatedI started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies View RelatedI just installed ubuntu 10.10, and im triying to update, when i uncheck the packages that i dont want and click on the "install updates" button in the update manager, the update manager check it again and download the packages that i dont want
View 1 Replies View RelatedI have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/e/eglibc/libc6-i386_2.10.1-0ubuntu16_amd64.deb
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch http://archive.ubuntu.com/ubuntu/pool/multiverse/s/sun-java6/sun-java6-jre_6-15-1_all.deb Connection failed [IP: 91.189.88.31 80]
Ubuntu Restricted Extras stalls when it's time to download the Java package I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I tried searching for the errors on the net and in the forums, and they're all somehow related to proxy servers. I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup.
Take note though, that I am able to install other softwares normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer. It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
[code].....
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedI'm having trouble updating. Using the update manager fails and I see the message:dpkg: parse error, in file '/var/lib/dpkg/available' near line 23288 package libbonoboui2-common': 'Conflicts' field, reference to 'libbonobous2-0': version contains ' '
I've tried
sudo dpkg --configure -a
and
[code]....
every time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
When i do update from Terminal, i dont get all updates which are in Update manager. Why?
Code:
sudo apt-get update
sudo apt-get upgrade
I've run the command "sudo apt-get update" from terminal, showing no update to do.Then I've run the update manager (System-Administration-Update Manager) and it has shown an update (adobe flash).I thought that "apt-get update" command and update manager were the same... Why do I have different results ? Is something missing in my "sources.list" file ?
View 4 Replies View RelatedNormally Update Manager always finds the update to the next version of Ubuntu. It still hasn't given me any notion whatoever. I allready changed the settings from regular to LTS, but nothing changes. There are updates to the kernel, but I cannot download them, so I'm kinda stuck here.
View 5 Replies View RelatedI upgraded from 10.10 to 11.04 on my Toshiba 32-bit laptop without any problems.Since the upgrade I am starting to have troubles on this machine. Most others are 64-bit and bar an Evolution issue are fine.In this case, 24 hours after the upgrade the machine wanted to do an Update. It would not allow the update until I fixed some broken packages which I did via Synaptics Package Manager. I then Marked All Upgrades and did the update from there.It was fine until I shut down and tried to log in again.I got the Blue Screen of Death!!!!!! I thought only Windows had this!Anyway, I could not log in. The auto login was not working so I used Other which gave me Recovery, entered my UN and PW, and I got the error message:
HTML Code:
Could not update ICEauthority file
I have searched the forum and some other sites, but none of the ideas can I get to work. I can start the machine using a 9.10 CD in the trial mode, but can not download the files suggested or delete the ICEauthority file, etc...
I upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
Using 11.04. After an update by Update Manager, everything seems fine. but after I rebooted it fails to reach the log in screen. It shows Ubuntu is booting up, after that, it seems it has crash, though I managed to boot it up and go into my desktop in low graphics mode.As I'm new to Ubuntu,
View 4 Replies View Relatedi have a healthy and fully operational mobile broadband connection yet i cannot update my Ubuntu 9.10 computer. every time i try to update i receive an error message with the title: "could not download all repository indexes", the information the dialog box contains is as follows
GPG error: http://flomertens.keo.in edgy Release: The following signatures were invalid: NODATA 1 NODATA 2GPG error: http://ntfs-3g.sitesweetsite.info edgy Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://flomertens.keo.in/ubuntu/dist...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
[code]....
The option to update to 10.10 isn't appearing in Update Manager... Is it too early, or am I doing something wrong?
View 2 Replies View Relatedim on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
Can you update to 10.4 through the Update Manager GUI in Gnome?
View 4 Replies View RelatedI used the command sudo apt-get update and then a series of updations were done. But again when i went to System>Adminstrator>Update Manager, many updates were available. On clicking update again a series of updates were done. As i thought the CLI update was all that was required.
View 1 Replies View Relatedafter initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
View 3 Replies View RelatedI've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies View RelatedI am facing a disgusting problem. While I am trying to update my system using update manager It downloaded the files and then while it starts installation it shows the following message
Code:
(Reading database ... 60%dpkg: unrecoverable fatal error, aborting:
files list file for package 'linux-libc-dev' is missing final newline
[code]....
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
When doing a routine update to GRUB, it asked me what drive/partition I want it installed on. When I clicked enter to pass the OK message, the update manager froze momentarily and then it passed the selection page, saying "Warning: Installing GRUB to a partition other than the MBR is not recommended"
How can I fix this?
I have a very strange problem; when trying to apt-get update or aptitude update I get time out errors. At first it was resolving ipv6 adresses:
Cannot initiate the connection to ftp.litnet.lt:80 (2001:778::87). - connect (101: Network is unreachable) [IP: 2001:778::87 80] Err [URL] Cannot initiate the connection to security.debian.org:80 (2001:a78:5:1:216:35ff:fe7f:6ceb). - connect (101: Network is
unreachable) [IP: 2001:a78:5:1:216:35ff:fe7f:6ceb 80] As my host does not have normal ipv6 support, i just tried to disable ipv6: echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf
[Code]....