Ubuntu Installation :: How I Removed RAID Metadata From Hard Disks
Oct 18, 2010
I had a couple of IDE hard disks that had previously been set up as a RAID1 array.I wanted to re-format and use them as separate independent hard disks but Ubuntu reported that they were part of a RAID array.This is how I removed that RAID metadata from the drives.With both drives connected I booted up Ubuntu 10.10 Live CD.
I checked the device names via System, Administration, Disk Utility - they were listed as /dev/sda and /dev/sdbI also noted that there was an extra device with name of /dev/md-0 which was the RAID array.Then I rebooted the PC, and checked the device names via System, Administration, Disk Utility - no more /dev/md-0 and the two drives no longer showed as part of a RAID array.
View 2 Replies
ADVERTISEMENT
Apr 8, 2011
I would like to mirror some of my partitions (i.e. /home) with a software RAID. My primary harddisk is a Western Digital WD20EARS with Advanced Factor (4kB Sectors). The secondary disk is a Samsung HD103UJ with old sector-style (512B). Is it possible to set up a RAID 1 containing a partition with advanced factor an a partition with old sector-style or do both partitions have do be in the same sctor-style?
View 1 Replies
View Related
Jan 13, 2010
I'm looking to stock my SuperMicro P8SCi with two 1-2 TB SATA hard discs, for running backups and web hosting. There are reviews of certain disks stating that the low-power disks will get kicked out of the Raid due to their slow response time, and it also appears that there have been quality problems with these newer disks, as if the race to size has lowered their reliability.
Can someone recommend a good brand and specific disks that you've had experience with? I'd rather not need to replace these after putting them in, but I also don't want to pay significantly more for an illusion of quality.
View 2 Replies
View Related
Apr 11, 2010
I wanted to merge my 1TB disks into and RAID 5 array, 4 of them in RAID 5 is above 2Terabytes limit of msdos partition tables which grub2 can boot from, so I decided to start up the system from scratch, by building it on GPT partitions, but seems grub2 won't boot from GPT partition because it drops to grub rescue and I can't really do anything from there.
here's my set up:
/dev/md0 (raid 1) - 100MB total:
- dev/sda1, /dev/sdb1, /dev/sdc1, /dev/sdd1
/dev/md1 (raid 5) - 45GB total:
- dev/sda2, /dev/sdb2, /dev/sdc2, /dev/sdd2
/dev/md2 (raid 5) - something bit lower than 3TB:
- dev/sda3, /dev/sdb3, /dev/sdc3, /dev/sdd3
any tips how to have this system up and running? Because I've spent like 3 days jumping over various problems
View 8 Replies
View Related
Jan 11, 2010
I just bought two 320GB SATA drives and would like to install F11 with software RAID 1 on them. I read an article which explains how to install RAID 1, but it used 3 disks: one for OS and two clones. Do I really need a third disk to install RAID 1 configuration? If 2 disks is enough, then should I select "Clone a drive to create a RAID device" during F11 installation as explained here?
View 6 Replies
View Related
Jun 16, 2010
I have 6 hard drives that have 9.10 and 10.04 on them. Not as a dual boot, but some hard drives have different versions on them. When I have plugged the drives in a couple of weeks later, the grub is gone and system will not boot. I get like a grub 1.5 error and that is all the options I have. Does anyone one know why this happens? Nothing on the drives but the O/S to get rid of windows. All drives worked perfect until they were removed and installed later.
View 3 Replies
View Related
Jan 15, 2011
I would like to install ubuntu on windows xp which has 6 partitioned hard disks. When I try to install ubuntu on hard disk F, it says i need to select a root. However, I could not succeed in selecting a `root`. I also tried wubi, but it was terminated with an abrupt error just before it was finished. Furthermore, what does boot directory mean?
View 5 Replies
View Related
Aug 5, 2009
the hard disc has two partitions, one is 156gb ntfs, currently with windows xp prof sp2, and I am trying to install linux to the second partition, also currently ntfs.I am not a total newbie (i used fedora 10 last semester and ubuntu the semester before that). I have tried installing ubuntu9.04, fedora 10, fedora 11, and opensuse11.1 to this computer, and every time the installation probes for hard disks it comes up with zip, unless I have my external disks connected. Otherwise "No hard disks were found for the installation. Please check your hardware!"with OK button.
I also tried with gparted to see if I could find the hard disk, and still had no luck. I googled my problem and found others with similar problem but no satisfactory solution.does anybody have any idea what could be wrong and how to fix it??
View 6 Replies
View Related
Mar 6, 2010
I have 3 hard disk drivesone regular and two sata: Ubuntu / is installed on sata /dev/sda6 Ubuntu /boot is installed on /dev/sda1econd sata hard disk /dev/sdb is emptyI have just reformatted it to ext3third hard disk is /dev/sdc with some fat and ext3 partitionsif I shutdown computer, then plug out one of sdb/sdc or both of themthen after BIOS I see grub menu (as usual)but if I hit any keyboard button the computer automatically rebootswithout any messagesI tried hitting c,e,enter - reboot I tried reinstalling grub like this:
$ grub
grub> find /grub/menu.lst
(hd0,0)
[code]....
View 4 Replies
View Related
Feb 26, 2011
I have a fully operational PXE boot server, the client boots up and begins the setup process however, fails to detect the hard disk, I have tried with ubuntu 8.10, 9.10 and 10.10 and none of them will see my hard disk, I boot to the cd and it sees the hard disks with no problem, so apparently the pxe boot server isnt serving up the neccesary drivers or something to detect my hard disks properly. They are just IDE drives and like I said, regular cd install detects my drives just fine.So if anyone here has any information that may help shed some light on this issue I would be so grateful
View 1 Replies
View Related
Jun 13, 2011
I have no hard drives in my computer, so I have been trying to boot Ubuntu 11.04 from an 8GB usb flash drive. Is this possible? So far the best result i have gotten is it will sit on the loading screen for a while then dump. I was only able to get the last little bit which reads mount. mounting /dev on /root/dev failed: no such file or directory. mounting /sys on /root/sys filed: no such file or directory. mounting /proc on /root/proc failed: no such file or dirctory. target file system doesn't have requested /sbin/init
View 4 Replies
View Related
Apr 30, 2009
I have three hard disks in my PC , hda is used for /, /home, /boot and swap. Everything seems to setup fine here I then have partitions sdb1 and sdc1. On the edit partion options for these hard drives I can set the mount point. I have never seen this before with the other distros I have used and usually have to mess around with fstab after install to mount these disks, so was pleased to see this option.
Under my previous install (Debian, which I didn't use for long) I had these drives mounted under /media/store1 and /media/store2. This is reflected in the "Edit Parition: /dev/s***" options where the "Original File System Label" is shown as store1 and store2 for each disk
[Code]...
View 2 Replies
View Related
Mar 9, 2011
I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies
View Related
Mar 30, 2011
I know I can simply create a degraded raid array and copy the data to the other drive like this: mdadm --create /dev/md0 --level=1 --raid-devices=2 missing /dev/sdb1
But I want the specific disk to keep the raw ext3 filesystem so I can still use it from FreeBSD. When using the command above the disk will be a raid disk and I can't do a mount /dev/sdb1 anymore. A little background info. The drives in question are used as backup drives for a couple of Linux and FreeBSD servers. I am using the Ext3 filesystem to make sure I can quickly recover the data since both FreeBSD and Linux can read from that without problems. If someone has a different solution for that (2 drives in raid 1 that are readable by FreeBSD and writeable by Linux),
View 1 Replies
View Related
Feb 3, 2011
When we assemble a raid array, from where does it load configuration information for that array? I thought it refers to /etc/mdadm.conf file, but in my system, mdadm.conf file doesn't even contain all information. Still it is able to successfully assemble previously created device.
# cat /etc/mdadm.conf
DEVICE /dev/sd[bcdjkl]1
DEVICE /dev/loop[012345]
[code]...
View 2 Replies
View Related
Mar 24, 2010
My system is installed on my main hd. Is possibile, if i buy a new hd, to setup a Software RAID, so with old and new hd without reinstall ubuntu?
View 2 Replies
View Related
Jul 8, 2010
What is the best way to install Windows and Linux on two-hard-disk array? In fakeraid there are no problems in Win, but linux installation is almost impossible (i've tried unsuccessfully...). In software raid it would be impossible to share files between win and linux? And finally hardware raid is possible, but cheap controllers have low performance. Is there any other way (apart from spending a lot of $$ for adaptec controller) ?
View 1 Replies
View Related
Jan 5, 2011
I am using Ubuntu 10.10. I have a system set up with 1tb HD. I also have another 1tb HD which I'd like to use to mirror the other drive. So if the primary HD fails I can boot and operate from the mirrored drive. I've read that this is possible by using Raid. however I am confused if it is possible to set-up with a HD which is already set-up Ubuntu system. Also what what I can make out the mother board does not have a raid option.
View 2 Replies
View Related
Jan 29, 2010
So windows wouldn't recognize my drives as a raid setup, so I disabled it and switched to IDE, now Ubuntu 9.10 installation will only recognize my drives as RAID. I have and ASUS M3A32-MVP Deluxe Series motherboard, it has 4 sata connectors and 2 marvel controlled sata connectors. In the 4 sata connectors I have my 2 wd 500gb hds, my dvd burner, and my external usb, esata slots. In the marvel controlled sata connector I have a wd 160gb hd. Originally when I built the computer I wanted a raid setup with the 2 500 gb hds.
But windows wouldn't recognize the raid set-up and wouldn't boot properly. So I said screw it and removed the raid and set all the drives to IDE. Then, when I tried to install Ubuntu 9.04 it would only recognize my 2 500 gb hds as raid. Gparted recognizes the drives as both raid and IDE. Eventually, after a day or two of praying and messing around the installer recognized both drives as raid and IDE. A couple months later here I am trying to install Ultimate Edition 1.4.
View 14 Replies
View Related
Aug 16, 2011
I have built a couple RAID's, but I'm uncertain of how I should format the partitions of the raid. Should I format partitions on each disk, and then add them to a raid, or should I create a raid on unformated disks and then format the raid as a partition? Does it matter, and are there performance/reliability issues? I'm creating a RAID-5 using 3 SATA disks on RHEL for user data area.
View 5 Replies
View Related
Mar 11, 2011
I have a 4 disk raid 5 array on my Ubuntu 10.10 box. They are /dev/sd[c,d,e,f].Smartctl started notifying me that /dev/sde had some bad sectors and the number of errors was increasing each day. To mitigate this I decided to buy a new drive and replace it.I have an external 4-bay disk enclosure. I failed /dev/sde via mdadm:
Code:
mdadm --manage /dev/md0 --fail /dev/sde
mdadm --manage /dev/md0 --remove /dev/sde
[code]...
View 5 Replies
View Related
Jun 7, 2010
I just had a whole 2TB Software RAID 5 blow up on me. I rebooted my server, which i hardly ever do and low and behold i loose one of my raid 5 sets. It seems like two of the disks are not showing up properly.. What i mean by that is the OS picks up the disks, but it doesnt see the partitions.
I ran smartct -l on all the drives in question and they're all in good working order.
Is there some sort of repair tool i can use to scan the busted drives (since they're available) to fix any possible errors that might be present.
Here is what the "good" drive looks like when i use sfdisk:
Quote:
sudo sfdisk -l /dev/sda
Disk /dev/sda: 121601 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 0+ 121600 121601- 976760001 83 Linux
/dev/sda2 0 - 0 0 0 Empty
[Code]....
View 2 Replies
View Related
Mar 31, 2010
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
View 2 Replies
View Related
Sep 25, 2010
I have implemented LVM to expand the /home partition. I would like to add 2 more disks to the system and use raid 5 for those two disks plus the disk used for /home. Is this possible? If so, do I use type fd for the two new disks and use type 8e for the existing LVM /home disk? Or do I use type fd for all of the raid disks?
View 1 Replies
View Related
Aug 17, 2010
I use slackware 13.1 and I want to create a RAID level 5 with 3 disks. Should I use entire device or a partition? What the advantages and disadvantages of each case? If a use the entire device, should I create any partition on it or leave all space as free?
View 4 Replies
View Related
Sep 10, 2010
I have a 7-drive RAID array on my computer. Recently, my SATA PCI card died, and after going through multiple cards to find another one that worked with linux, I now can't assemble the array. The drives are no longer in the order they were in previously, and mdadm can't seem to reassemble the array. It says there are 2 drives and one spare, even though there were 7 drives and no spares. I know for a fact that none of the drives are corrupted, because one of the non-working RAID cards was still able to mount the array for a short period, but would loose the drives during resyncing (I later found out that the chipset on the card was had extremely limited linux support). I have tried running "mdadm --assemble --scan" and after the drive is partially assembled, I add the other drives with "mdadm --add /dev/md0 /dev/sdc1". These both return errors and will not complete on the new raid card.
Code:
aaron-desktop:~ aaron$ sudo mdadm --assemble /dev/md0
mdadm: /dev/md0 assembled from 2 drives and 1 spare - not enough to start the array.
[code]....
View 4 Replies
View Related
Feb 5, 2011
I am trying to create a new mdadm RAID 5 device /dev/md0 across three disks where such an array previously existed, but whenever I do it never recovers properly and tells me that I have a faulty spare in my array. More-specific details below. I recently installed Ubuntu Server 10.10 on a new box with the intent of using it as a NAS sorta-thing. I have 3 HDDs (2 TB each) and was hoping to use most of the available disk space as a RAID5 mdadm device (which gives me a bit less than 4TB.)
I configured /dev/md0 during OS installation across three partitions on the three disks - /dev/sda5, /dev/sdb5 and /dev/sdc5, which are all identical sizes. The OS, swap partition etc. are all on /dev/sda. Everything worked fine, and I was able to format the device as ext4 and mount it. Good so far.
Then I thought I should simulate a failure before I started keeping important stuff on the RAID array - no point having RAID 5 if it doesn't provide some redundancy that I actually know how to use, right? So I unplugged one of my drives, booted up, and was able to mount the device in a degraded state; test data I had put on there was still fine. Great. My trouble began when I plugged the third drive back in and re-booted. I re-added the removed drive to /dev/md0 and recovery began; things would look something like this:
Code:
user@guybrush:~$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdc5[3] sdb5[1] sda5[0]
3779096448 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
[Code]...
View 9 Replies
View Related
Mar 4, 2010
I'm trying to do some RAID managing with mdadm. I would like to sync my spare disk and then remove it from the array for making a backup out of it with dd command (the best way i can think of to get the current image of the whole system as it can't be done using the active RAID as source, because is constantly in use and changing). So, I have RAID1 array with 1 spare and 2 active disks (configuration listed below). Now I would like to force spare to sync and then remove it from array, although not faulty.
However, mdadm man page states:
"Devices can only be removed from an array if they are not in active use. i.e. that must be spares or failed devices. To remove an active device, it must be marked as faulty first."
So, I'd have to mark a disk as faulty (which it is not) to be able to remove it from array. There seems to be several people reporting that they can't remove this faulty flag accidentally given to a drive. And mdadm does not give direct for such operation. Isn't there a way I could remove and add disks whenever feeling like it?? One way would be open the cover and physically remove the disk. I'm not taking the risk, though. System is almost always in use, so there is not much chance for me to power off for temporary disk removal.
RAID CONFIGURATION:
~# mdadm --detail /dev/md0
/dev/md0:
Version : 00.90.03
Creation Time : Fri Aug 4 17:38:26 2006
Raid Level : raid1
Array Size : 238950720 (227.88 GiB 244.69 GB)
View 3 Replies
View Related
Jun 25, 2010
I've got 3 extra disks on OpenSuse 11.2 - all the same size. I've created a partition on all of them as type 0xFD. If I then try and add raid in yast I get "There are not enough suitable unused devices to create a RAID."
View 9 Replies
View Related
Mar 4, 2009
I'm trying to to determine the speed of my Raid Hot swappable disks. I need to determine if each disk is ether 10,000 rpm or 15000 rpm. I know that each disk is 72GB in size: I have tried to find this information ind/proc/diskinfo and using dmesg but no luck.
Hardware spec:
dl380 with P400 raid controller
/dev/cciss/c0d3: (Smart Array P400) RAID 1 Volume 0 status: OK.
/dev/cciss/c0d3: (Smart Array P400) RAID 1 Volume 1 status: OK.
/dev/cciss/c0d3: (Smart Array P400) RAID 1 Volume 2 status: OK.
/dev/cciss/c0d3: (Smart Array P400) RAID 1 Volume 3 status: OK.
[root@smstcatp11 cciss_vol_status-1.03]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/cciss/c0d0p6 29134940 2806224 24848732 11% /
/dev/cciss/c0d1p1 59122668 20567660 34972516 38% /apps
/dev/cciss/c0d0p1 101086 11353 84514 12% /boot
/dev/cciss/c0d3p1 56616620 102716 53056720 1% /cdr
/dev/cciss/c0d3p2 2466732 61816 2279612 3% /home
/dev/cciss/c0d2p1 59122668 626432 54913744 2% /data
none 2073896 0 2073896 0% /dev/shm
/dev/cciss/c0d0p2 16516084 78820 15598272 1% /tmp
/dev/cciss/c0d0p3 16516084 198828 15478264 2% /var
View 2 Replies
View Related
