Since a few hours I can't seem to get GNOME working. Whenever I boot my computer, I just get tty1 wanting me to log in. That works, but then I just get tty1 with a terminal... In tty7 I can see the startup checks which end with "* Checking battery state... [OK]".
View 2 RepliesI just installed GS following the instructions here:[URL]... and the classic way of getting GS to start at login (adding gnome-shell --replace in start up applications) doesnt work.
To start GS now we have to use the command "~/gnome-shell/source/gnome-shell/src/gnome-shell --replace" via the terminal adding that to start up doesnt work either, does anyone know how to get GS to start at login?
I've recently installed Ubuntu 10.04 from a USB install. It worked very well for a few days, in which I hibernated at least once. Today, I hibernated Ubuntu again - But after powering up the ubuntu opened up fresh. In the same session I've installed GnomeBaker, and tried to use it - But it failed burning. A couple of restarts later Ubuntu stopped starting up - It doesn't even show the graphical ubuntu load screen, just quickly writes a lot of text, and the last screen contains a trace (I think), mounting errors, and the error "Target filesystem doesn't have /sbin/init.".
I have a BusyBox console (v1.13.3) with the cursor "(initramfs)". I found this post [URL]. In which transmutable describes the same problem I have, but I wasn't able to start into a live USB (or Live CD), and got error like the one described in the following post [URL]. My computer is Lenovo T410, and I'm dual booting Windows 7 32bit (Yes, there is a recovery partition - But Ubuntu worked before, so I reckon this is not the case).
I'm using Ubuntu 10.10 server edition on AMD 64-bit machine. When I try to open system monitor(system->administration->system monitor) it's not starting. Then i use console to open system monitor using command #gnome-system-monitor then it gave me the following error on the console.** (gnome-system-monitor:19279): WARNING **: SELinux was found but is not enabled.
*** glibc detected *** gnome-system-monitor: malloc(): memory corruption: 0x0000000000881d80 ***
======= Backtrace: =========
/lib/libc.so.6(+0x774b6)[0x7f1ec27054b6]
[code]....
Isn't it possible to create a launcher to an application and in the command tell it to start minimzed?
Something like
vlc --minimize
Or something similar? this would be helpful to application on startup not crowding your desktop on login.
I ran an update after installing the OpenSuse 11.2 Gnome Live CD and could not start Gnome.Signing in would only get me a blank screen with wallpaper.Changing the display manager in /etc/sysconfig/displaymanager to kdm (from the default gdm) resolves this issue for me:DISPLAYMANAGER="kdm"
View 2 Replies View RelatedI deleted all the contents of the /tmp/ folder while X is running.rm -R /tmp/* Now the X is continuously restarting without showing the login screen. Is there any way to fix this
View 3 Replies View RelatedAfter my last package upgrade (Under Testing/Sid), gdm refuse to starts and immediately gives the Gnome message :
Oh no! Something has gone wrong. GNOME-shell
This error appears before I can choose this account to login. GDM or Xorg doesn't give any useful log.
After uninstalling nvidia non-free drivers, I'm now able to boot with nouveau.
Any way for having non-free drivers working again?
all programs and windows that I start on my F14 x64 machine getting either started in the background or minimized. This is driving me insane. My Gnome (no compiz) has that annoying behavior since F13 and I've already gone through any windows/appearance/effects settings - w/o any success.
View 1 Replies View RelatedI am facing a problem with my AT91SAM9260 customized board. Board is almost same as the evaluation kit.
I could download the binaries ( Bootstrap-v1.16, u-boot-1.3.4, linux kernel 2.6.20) successfully to the DATAFLASH/NANDFlash in my board by using atmel SAM-BA tool with usb/serialport/jlink.
Here I describe the problem.
When I power up the board, boot strap is not jumping to U-boot location, in the normal boot sequence and board stuck with bootstrap.
But when I disconnect/connect the JTAG USB cable ( provided with SAM-BA ICE) , it's jumping to u-boot location and booting the board properly. I'm getting the same error in NAND FLASH also.
I have tried one more test case.I copied bootstrap binary at the flash location, [location which is specified for u-boot binary] instead of U-boot.bin (location: 0x8400 in dataflash), I got continous bootstrap debug messages in my console. [ So can I conclude SDRAM doesn't have any problem? ]
Bootstrap code or U-boot code ?
I'm studying Information Technology and doing Linux as part of it. One of the questions in my text book is: Describe three different ways to start a command line interpreter when using the Gnome desktop of openSUSE Linux. I can't for the life of me make sense out of it.
View 8 Replies View RelatedI want to install Suse 11.3 on a Proliant server. I thought not to take the obvious Windows CD's (little sorrow now) and try Linux. I used an USB Live CD to start. I tried all the startup options like apci=off and so on. Also tried lower resolutions and VESA. Still no luck. After running and starting (seeing in ALT-F4 the Kernel loading), all ALT screens get a blank black screen. Only option is to restart, while then SUSE is displaying it is going down.
View 7 Replies View RelatedFor some reason my gnome-terminal is starting in / when it should be ~ I have checked /etc/profile, ~/.bashrc and /etc/passwd and everything seems fine as far as i can tell Konsole and xterm are starting up with the working dir to my home dir (as set by /etc/passwd) But im at a loss to see where gnome-terminal is starting in / if i enter cd with no argumants in gnome-terminal it is switching to ~ fine, so i dont think its mistaking my home dir for /
View 2 Replies View RelatedI just installed GNOME SlackBuild and it just errors on no xclients file and drops me in to fail safe mode where do I get an xclients file ?ORhow do I make one ?
View 3 Replies View RelatedCurrently when I connect a card reader (with a card inside, of course) gnome auto-starts gphoto. However I don't use gphoto and I would like gnome to auto-start nautilus instead
View 5 Replies View RelatedGetting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.
I have avant-window-navigator in my startup appplications. This apparently causes gnome to use the Gnome icon theme on boot, instead of the Humanity theme I selected in Preferences->Appearance. I just have to go to Preferences-Appearance again to get the Humanity theme back to work (I don't even have to change any settings, just going there is enough.) When I remove awn from my startup applications, this problem doesn't occur.
View 4 Replies View RelatedI can't get cups to auto-start at boot time. Running sudo cupsd manually works fine, but I don't want to have to do that every session.This seems to be affecting lots of folks. This thread claims that bug #444597 in launchpad has a solution, but I must be too stupid to see it, and the thread is closed so I can't post there.
All my rc and init files seem fine, bootsplash is off, and, of course, there are no useful boot error logs in Karmic.
I'm having a problem getting my MPD service to start during boot. This started a week or so ago. It's no big deal, just a pain. It start fine when I run the script in a terminal. I changed the start priority with update-rc.d. I occasionally get a segfault message in my syslog and messages log. Not sure what it means.
Mar 18 22:44:25 tony-laptop kernel: [ 1244.162897] mpd[3874]: segfault at c00 ip 0806f7d2 sp b6f2a130 error 4 in mpd[8048000+4e000]
Mar 18 22:55:28 tony-laptop kernel: [ 1907.414336] mpd[4759]: segfault at c ip 00194d1d sp b6f9bcd4 error 4 in libpthread-2.10.1.so[18d000+15000]
I lost power to my ubuntu box earlier today, so it didn't shut down properly. I'm now trying to start it but it keeps getting stuck at 'Starting Up' for over an hour. I've tried pressing escape to boot a different version or into recovery mode. The only difference I get is when loading a recovery mode it just puts up a flashing underscore instead of 'starting up . . .' - it still hangs there. This is a small box without a optical drive which is why I haven't tried a live CD.
I'm not really familiar with linux or boot issues.
However, many of those threads show that adding two lines to the file "/etc/network/interfaces" should solve the problem. I checked on my PC and those two lines are already there.. but CUPS still doesn't start properly on boot up...
View 1 Replies View RelatedSomething happened to my ubuntu 10.4 - I can't see my desktop after boot. As a matter of fact, when I boot I see a message saying: Continue to wait; or press S to skip mounting, or M for manual recovery. I left it like that over night, this morning I found the logon box, typed my password and I got to an empty desktop.
I did a Ctrl-Alt-F1 and logged on there, I am looking at /etc.fstab and I see the first lines like this:
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda3 during installation UUID=3538bcd0d-...
ext4 errors=remount-ro 0 1
I guess something is wrong right from the start, some portion of the file system is not recognized anymore (or is in the wrong place) ...
I was playing around with my house mates fresh install of 11.04, was going to show him compiz, little did I realize it does not like playing with Unity with wobbly windows. So now Unity wont start at boot and I had to find a round about way of getting to the terminal to then to start Unity manually.
View 2 Replies View Relatedi am trying to keep my gui from loading unless i want it to. does any one know how i can go about doing this? also how do i uninstall the graphical boot also i have heard that you can add a 3 on to the end of a your kernel line in grub to get a non graphical boot. this also sounds interesting to me
View 9 Replies View RelatedHow would I make sure cron is running every time my server is turned on? I want to make cron jobs, but I need to know that it is running when the server boots. Also, I used a program at some point that was terminal based and it showed be what programs ran when the server booted up. It allowed me to check a box and select which programs I could run at boot. If someone could tell me this program,
View 2 Replies View RelatedI've just renamed my Mythbuntu 9.04 machine which was running a frontend and master backend. It's now a frontend and slave backend with a different machine name. All is working in that the connection between slave and master backend functions without problems. However, the mythbackend on the slave will not start on boot - I have to start it manually from the terminal. In addition, the power button on the machine will not shutdown the machine any more - I can only shut it down from the terminal.
View 1 Replies View RelatedSince I have not gotten anything on the "General Help" I am posting this here: When a Ubuntu 10.10 I have starts up apache2, MySQL and postfix start properly but bind9 doesn't. Once booted is I run 'sudo /etc/init.d/bind9 start' it starts. The only thing odd on this system is I have a "inet6 v4tunnel" interface defined in my /etc/network/interfaces. From booting in the syslog there is:
Code:
/var/log/syslog:Feb 28 19:02:42 ubuntu named[1029]: starting BIND 9.7.1-P2 -u bind -d 9
/var/log/syslog:Feb 28 19:02:42 ubuntu named[1029]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind'
[code]....
Even with the bind debug level at set at 90 I do not get any more in the logs that what I posted before. The lack of errors in the logs is giving me no idea where to start. I commented out the IPv6 tunnel interface and rebooted and still no help. bind still is not starting at boot. OK, it is not a permissions issue, I have changed the config and zone files to be owned by bind:bind, root:bind, root:root and bind:root and it has made no difference. Doing a fresh install on a Virtual Box VM and configure it in a similar manner bind9 starts normally. (I am almost to the point where I will rebuild the box)
configure my Apatche server to start at Boot Up. I started 'Start Up Application' under > 'System' but didn't know what to do then.How to make Apatche configured to be used over LAN. Btw i have it already up and running and i can accesses the web pages through my browser.
View 3 Replies View RelatedSince my desktop (Ubuntu 10.4.1 for now) has no need for anyone trying to ssh into it, I want to prevent ssh from starting as a service when I boot up.
If I type: sudo update-rc.d -f ssh-agent remove
in terminal, will that stop the service for all boots (until I run: sudo update-rc.d ssh-agent defaults -- in terminal)?
I've already removed (unchecked) ssh agent key from my startup applications
I don't exactly when this started, but I hadn't booted my mythbuntu box for a while. When I boot it now, it hangs after grub at 'Starting Up...'. I was running 9.10 64bit, with 4GB Ram installed on an AMD64 3700+ ASUS A8N5X mobo. How can I resolve this? Can I modify boot options by hitting the Esc key before grub? What options should I use? I made no changes myself, it just happened on the next reboot. I hope that I won't have to burn a livecd. I only say that because the only machine that I have with a decent burner is my 9.10 box.
View 6 Replies View Related